Mud Gas Separator
Mud Gas Separator is also called Poor Boy Degasser. It is mainly used to remove the big bubbles with the diameter of about ≥Φ3mm. Most of these bubbles are the expanded gas filled in the drilling fluid in the annular of wellbore, which might cause well kick if not to remove it timely.Drilling fluid with gas goes into the separator and drops along the inner wall. With collision to increase the contact area, it flows downward and becomes a turbulent state which makes gas separate from mud. The free gas goes through the top of vessel and is discharged from the gas outlet. The length of gas export pipe can be determined at the spot.The drilling fluid without gas flows into the following solids control equipment.
Other supplier products
|
|
1129-00 rubber float mount |
1129-00 is a rubber float mount used in shale shakers and mud cleaners. Each set equipment need 4 pieces.
Details:
Diameter: 100mm
Height: 75mm
Bo... |
|
|
Flare igniter |
Flare Ignition Devices is a special equipment to burn the waste gas from mud gas separator. The gas bubbles was remove gas out then come into flare... |
|
|
Mongoose Shale shaker screens |
Name: Mongoose shaker screens
Type: Frame flat plate type
Material: composite material
Mesh size: API20 to API400 mesh
Size: 1165*585mm
Net we... |
|
|
Mud Gun |
Mud Gun is a cleaning equipment, the function of mud gun is clearing the solids on mud tank and mud agitator’s impellers. So the mud gun also... |
|
|
Mud Tank |
Mud tank can be square and cylinder type. The mud tank will be configured completely with electrical control, lighting, guard rail, necessary pipel... |
供应产品
Same products
