High Speed USB 3.0 AF, Right Angled, 90 degree,DIP Type with KINK Legs(Over PCB)
Introduction：
High Speed USB 3.0 AF, Right Angled, 90 degree,DIP Type with KINK Legs(Over PCB),one of the most popular part among the USB3.0 Group.
USB 3.0, the new generation of USB interface,It is characterized by a very fast transmission Speed, in theory up to 5Gbps, 10 times faster than the common 480Mbps High Speed USB (referred to as USB 2.0), fully surpass IEEE 1394 and eSATA.The appearance is basically consistent with the ordinary USB interface, and it is compatible with USB 2.0 and USB 1.1 devices, it has various types.
|
Type |
USB 3.0 AF, Right Angled, 90 degree,DIP Type with KINK Legs(Over PCB) |
|
Materials |
For housing can be PBT,LCP,PA6T,PA9T and so onFor shell can be SPCC, Copper and so on.Both are depands on custoer request |
|
Colour |
Blue or Black or Customized Color |
|
Plating |
For Shell, Ni and Tin PlatingFor Contact,Au,Ni,and Tin Plating |
|
Plating Thickness |
For Shell, 50U',100U' or HigherFor Contact, 1U',3U'5U'15U',30U' or HigherBoth are depands on custoer request |
|
Electronical |
Current Rated:1.80 Amperes for VBUS and GND contacts 0.25 Amperes for all other contacts |
|
Rated Voltage:AC 100V(RMS) |
|
|
Contact Resistance:30m ohm Max for VBUS and GND contacts 50m ohm Max for all other contacts |
|
|
Insulation Resistance:100M ohms Min |
|
|
Machenical |
Insertion Force:.35N Max |
|
Withdraw Force:10N Min |
|
|
Application |
PCB, Mobile Phone, Computer, Mobile Power, Bluetooth, Head, Jack speaker, Electronic products charging, etc. |
|
Package |
Tray Package or Tape Reel Or Customized Package |
|
Delivery Time |
Usually 25-35 daysafter receiving the 30% deposit |
|
Payment terms |
TT, L/C, DP or Negotiable |
|
Note |
This part is only one sample for this serious products, we can change the shell, the legs and even housing to make lots of similar parts. We are so able to produce other standard as per the clients' requirements. Just let us know.We are USB 3.0 With Cover Supplier. |
在线联系供应商
Other supplier products
 |
Standard USB 3.0 A Type Male Part，Mount PCB & DIP type with Position posts | Introduction： Type USB 3.0 A Type MalePart，DIP type with Position legs（Sink PCB type). Materials For housing can be LCP,PA6T,PA9T an... |
 |
Type C 3.1 Gen2, 24PIN, right angle, Contacts with DIP and SMT type | With the continued success of the USB interface, there exists a need to adapt USB technology to serve newer computing platforms and devices a... |
 |
Standard USB 2.0 A Type Female,Right Angled,DIP type | Introduction： Standard USB 2.0 A Type Female,Right Angled,DIP type,Black or White or customized colour,Normally Tray Package. Used for TV Board,... |
 |
DR 25PIN,Male parts,90 degree, Lathe Contact,2 rows,with rivet & screws | D-SUB Series, DR 25PIN 90 Degree, Male part, 2 Rows Lathe Contact, with rivet and screws. Normally this I/O connector used for Industrial Area w... |
 |
3.5mm Audio Jack( Phone Jack),Receptable, SMT contacts, with 2 position hosts | Introduction of Belongs to the connector field, Audio Jack is applied to Audio signal with different designs.The Audio jack connector for l... |
