.

GEA plate NT50NT100NT150NT250NT350 replacement factory direct GEA plate NT50NT100NT150NT250NT350 replacement factory direct

We’re a China based plate heat exchanger manufacturer, and we specialize in plate type heat exchanger, all kinds of plates and gaskets producing. 500+ moulds are with us, and we can replace the most applied plates and gaskets for Alfa Laval Gea, APV, Tranter, Sondex, Funke, Thermowave etc. There’s no difference when comparing our products with genuine ones. And through the past 13 years, we have been selling them to all over the world, especially in European and American markets.

The GEA brand, plates and gaskets we can produce and replace is: NT50T NT50M NT50X NT100TNT100M NT100X NT150L NT150S NT250S NT250M NT250L NT350S NT350M

Our plate material 304, 316L, Titanium, Hastelloy C-276 254SMO 904L;

Our gasket and ring gasket material NBR, EPDM, VITON, HNBR, CR;



在线联系供应商

至: Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

THERMOWAVE THERMOWAVE板片和垫片油到水啤酒冷却PHE出厂价
THERMOWAVE THERMOWAVE板片和垫片油到水啤酒冷却PHE出厂价 产品特点CHARACTERISTICS 01特殊设计的波纹板片 萨莫威孚特别设计的波纹板片,可提供多于常规换热板片一倍的流道组合数,根据不同的工况,可提供相应的设计和流道布置方式,选用更匹配的型号,能够实现经济性和传热性能的最大优化组合。 02板片工艺成熟,换热效果充分 板片采用成熟...
不锈钢304阿法拉伐硫磺双壁板式换热器生产厂家
不锈钢304阿法拉伐硫磺双壁板式换热器生产厂家 1/1 双壁式板式换热器 最大处理量:5000立方米/小时 最大设计压力:40bar 最大耐温:200℃ 最小温差:0.5-1℃ 接管直径:DN15~500 板片厚度:0.4mm - 1.2mm 垫片片材质:NBR, EPDM, HNBR,HT-NBR,HEPDM,C...
板式换热器用半焊式式板片制冷氨水
板式换热器用半焊式式板片制冷氨水 产品特点CHARACTERISTICS 01全密封焊接,稳定性好 两张波纹板片的所有密封周边,采用激光焊接成“板片对”,组成焊接流道;每一对板片之间采用胶条密封,形成可拆卸的常规流道。这种结构使每对板片都能方便的进行维护,同时又保证了焊接板对的稳定性。 02换...
Plate heat exchanger gaskets
Plate heat exchanger gaskets 1/1 基伊埃板片胶条 基伊埃板片胶条的板片波纹设计样式丰富,具有竖波浪纹和横波浪纹组合,以及各种深度,传热系数高,不易结垢和堵塞。 产品特点CHARACTERISTICS 01型号齐全 板片型号和尺寸齐全,具有特定的热性能和压降,能满足各种介质和工...
APV板式换热器板制造商双壁254 SMO
APV板式换热器板制造商双壁254 SMO 产品特点CHARACTERISTICS 01高效率的分流区设计 板片分流区设计独特,采用高效率分流引导区设计,表面介质流速均匀,换热系数提高。 02板片设计排列紧密 板片排列紧密,体积小,表面光洁,湍流度高,结垢小,同等面积换热效率更高。 03板片型号系列丰富 板片材质型号丰富,...
供应产品

Same products

RONGPENG Industrial Air Spray Gun Pneumatic Tool R700
RONGPENG Industrial Air Spray Gun Pneumatic Tool R700 卖方: 773794 FEATURE: • LVLP(Low Volume.Low Pressure)Spray Gun can operate at less than 10 psi at the no...
Equipments
Equipments 卖方: Lepu Medical Technology(Beijing)Co.,Ltd Lepu Medical Technology ( Beijing ) Co., Ltd was established in 1999. As a professional lepu medi...
RONGPENG Air Drill Pneumatic Tools RP7101
RONGPENG Air Drill Pneumatic Tools RP7101 卖方: 773794
海运
海运 卖方: Haoocean International Logistics (Shanghai) Co., Ltd. HAOOCEAN International Logistics (Shanghai) Co., Ltd. is an Alibaba's long-term full logistics se...
OCV Full-Automatic Assembly Line
OCV Full-Automatic Assembly Line 卖方: DONGGUAN YIHEDA AUTOMATION CO.,LTD. The VVT(OCV)is one of accessories of automotive engine, which was used to control the inlet of en...