EP40 Electrical Probe
Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradually focused its main business on developing CNC tool setterand touch probe. its production, and sales.We developed probes, tool setters, and a variety of probe styluses of the three series of products. As the first probe manufacturerin the field of CNC machine tool probe in China, Pioneer has always persisted in independent development pioneer machine and tool and worked hard to reach the world advanced level.
EP40 electric probeincludes a electric probe unit and a 20mm diameter cylindrical shank. It senses the contact with the metal workpiece through its conductivity,when the stylus touches the surface, the LED indicator lights up. It used to check work pieces of all kinds of solid materials with electrical conductivity.
Parameter of EP40 Electrical Probe
|
EP40： |
|
|
Measuring direction |
±X，±Y，+Z |
|
Arbitrary direction swinging angle |
X-Y±12°, Z +5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Trigger force in Z direction |
1000（g） |
|
Trigger force in X-Y direction |
65-130（g） |
|
Battery model |
LR1, 1.5V, 700 mAh. |
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
Seal grade |
IP68 |
Application of EP40 Electrical Probe
EP40 is used to measure solid workpieces with conductive properties; such as aluminum workpiece, stainless steel workpiece.
Direct measurement of steps, slots, external features, and contours of workpiece datum surfaces or edges.
EP40 straight shank can used with different kinds of taper shank in different kinds of machine tools.
Technical Characteristics of EP40 Electrical Probe
With wireless design, it does not hinder the movement of the machine tool and is easy to install
Three LED indicator lights are used to show the trigger state of the probe.
EP40 with a straight shank, size is smaller.
在线联系供应商
Other supplier products
 |
Problems That Should Be Paid Attention to when Calibrating the Touch Trigger Probe | touch trigger probesis smaller than the static diameter After learning about the principle of probe calibration, we can easily explain why t... |
 |
pioneergroup-cn./* | As an important component of the probe measurement system, the probe stylus/sensor is mainly composed of three parts: the stylus ball, the stylus r... |
 |
Manual Probe | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
 |
Machine Probe System in CNC Turning Machine | Harbin Pioneer's product design is based on the realization of satisfying their own functions and using more ideas to carry the connotation, then p... |
 |
M2 Screw Probe Stylus | M2 screw cmm stylus probesusually used for industry-standard coordinate measuring machine probes. The M2 screw probe CMM stylus has many different ... |
