OPS-30 Optical CNC Probe System
Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradually focused its main business on developing CNC probeand touch probe. its production, and sales.We developed probes, tool setters, and a variety of probe styluses of the three series of products. As the first probe factory in the field of CNC machine tool probein China, Pioneer has always persisted in independent development pioneer machine and tool and worked hard to reach the world advanced level.
OPS-30 optical probe system contains OP510 optical probing, OSI-20 receiver and standard measuring software. The OP510 is a compact 3D touch-trigger probe with optical transmission probethat is used for workpiece measuring. OPS-30 optical probe system mainly used in various specifications of machine center, CNC milling machine, drilling machine center and so on. We also provide infrared probe.
Parameter of OPS-30 Optical CNC Probe System
|
OP510： |
||
|
Measuring direction |
±X，±Y，+Z |
|
|
Arbitrary direction swinging angle |
X-Y±12°, Z +5 mm |
|
|
Repeatability （2σ） |
≤ 2 μm； |
|
|
Trigger force in Z direction |
600±30（g） |
|
|
Trigger force in X-Y direction |
40-80g） |
|
|
Optical signal receiving/sending distance |
>5m |
|
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
|
Model of the battery |
14250，3.6 (V), 2 Pcs |
|
|
Seal grade |
IP68 |
|
|
OSI-20： |
|
|
|
Optical signal receiving/sending distance |
>5m |
|
|
Input voltage |
24±10% VDC |
|
|
Output load current |
50mA |
|
|
Length of the cable |
8m |
|
|
Length of the cable retaining tube |
2m |
|
|
Seal grade |
IP68 |
|
在线联系供应商
Other supplier products
 |
Radio Probe System | The radio communication probe systemis suitable for various complex working conditions in the processing of CNC machine tools, mainly suitable for ... |
 |
M3 Screw Probe Stylus | M3 screw CMM probe stylususually used for coordinate measuring machine probes and flexible scanning probes. The M3 screw CMM probe stylus has many ... |
 |
Cable CNC Probe System | The pioneer cable systemis suitable for various complex working conditions in the processing of CNC machine tools, mainly suitable for small machin... |
 |
M3 Screw Probe Stylus | M3 screw CMM probe stylususually used for coordinate measuring machine probes and flexible scanning probes. The M3 screw CMM probe stylus has many ... |
 |
CNC Machine Tool Setter System | Harbin Pioneer M&E Technical Development Co, Ltd, cnc tool presetter manufacturers, was founded by Mr. Baichun Sun in 1995. After several years... |
