ABS Injection Molding
Plastic ABS resin is the polymer with the largest output and the most extensive application. As one of the abs plastic molding manufacturers, Feman Tooling organically unifies the various properties of PB, PAN and PS, and has excellent mechanical properties of toughness, rigidity and rigid phase balance.
ABS has excellent comprehensive physical and mechanical properties, and good low temperature impact resistance. Dimensional stability. Good electrical properties, wear resistance, chemical resistance, dyeing, finished product processing and mechanical processing.
Two-color injection moldingrefers to the plastic injection mold and moldingof two different materials into the same set of molds, so as to realize the molding process of the injection molded parts formed by the two materials. Some two materials are different colors, and some are different in softness and hardness, so as to improve the aesthetics and assembly performance of the product.
Can abs plastic be injection molded
ABS plastic is high in strength, light in weight, large in surface hardness, very smooth, easy to clean, stable in size, good in creep resistance and suitable for electroplating. Its field of application is still expanding. ABS plastic is widely used in industry. ABS injection products are commonly used to make shells, boxes, parts, toys, etc. Extruded products are mostly plates, rods, pipes, etc., which can be hot pressed, compound processed and modeled.
Properties of ABS Injection Molding Resin
Good overall performance, high impact strength, chemical stability, good electrical performance.
Good fusion with 372 plexiglass, widely used in two-color plastic parts, and the surface can be chrome plated and painted.
There are high impact resistance, high heat resistance, flame retardant, reinforcement, transparency and other levels.
Liquidity is a little worse than HIPS, better than PMMA, PC, etc., and flexible.
It is suitable for making general mechanical parts, wear-reducing and wear-resistant parts, transmission parts and telecommunication parts.
ABS lnjection Molding Requirement
Drying Temperature 60-80 °C
Drying Time 2.0-3.0 hr
Suggested Moisture Content <=0.20 %
Rear Barrel Temperature 180-220 °C
Middle Barrel Temperature 190-230 °C
Front Barrel Temperature 210-240 °C
Nozzle Temperature 200-240 °C
Mold Temperature 40-80 °C
在线联系供应商
Other supplier products
 |
PP Injection Molding | Polypropylene, abbreviated as PP, is a colorless, odorless, non-toxic, translucent solid substance. Polypropylene (PP) is a thermoplastic synthetic... |
 |
Automotive Plastic Injection Molding | Feman automotive mouldis the automotive mould projects and technical development & manufacturing foundation of Feman plastic injection factory.... |
 |
2K /2 Shot Injection Molding | A 2K/two-color mold is a mold in which two plastic materials are injected on the same injection molding machine and molded in two parts, but the pr... |
 |
Medical Plastic Injection Molding | Feman medical parts are essential component of Feman tooling. There is special department in-house that only service for the medical customers. A t... |
 |
POM Plastic Injection Molding | POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-crystalline engineering thermoplas... |
Same products
 |
White yellow beeswax used for cosmetic | 卖方: Syntop chemical Co.,Ltd. | Usage of Beeswax Cosmetics and Personal Care: Beeswax is a natural emulsifier and thickener, com... |
 |
Common Rail Injector Valve F00R J01 329 | 卖方: 828487 | Common Rail Injector Valve F00R J01 329 Common Rail Injector Valve F00R J01 522 Common ... |
 |
Intelligent Precision Glue Control System | 卖方: 855005 | Intelligent Precision Glue Control System The Golden Horse GM-4020 is an intelligent glue concen... |
 |
JM-5416D Automatic Rigid Box Making Machine | 卖方: 855005 | JM-5416D Automatic Rigid Box Making Machine The JM-5416Dintelligent visual fully automatic box m... |
 |
Positioning Machine JM-600B | 卖方: 855005 | Positioning Machine JM-600B The vision positioning machineis the core component for producing li... |
