2K Mould
TPE mold
TPE is soft plastic material, a TPE mold is used to produce TPE plastic parts, TPE can be molded separately to a soft plastic parts, but most of the time it is wrapped and molded with other hard plast...
Two Color Mold
Two color molds have high requirements for quality and mold design.HanKing mould is professional two color molds manufacturer, has more than ten years experience for two color mold design and manufact...
Two Shot Injection Mold
Two shot injection mold, is also called two-color injection mould, this technology is to inject two plastic materials on the same injection molding machine with two time injection molding, but the pro...
Unscrewing Mould
Mould Name： Unscrew Cap MouldPart Material：PP+TPEProduct Size： Product Description: Mould Cavity: Mould Size: 750*810*700mmSuitable Injection Machine:Mould Cavity Steel: Mould Injection System: Mold Master Hot...
Two Shot Mould
Mould Name： double shot mouldingPart Material：SAN+TPEProduct Size： 293*110.5*1.6 MMProduct Description: Water Tank Cover for a steamerMould Cavity: 1 CavityMould Size: 620*550*643 MMSuitable Injection Machine...
Two Component Toothbrush
Plastic Injection Mould standard: DME, HASCO, Meusburger, China LKM Standard etc.Plastic Injection Mold Steel: ASSAB8407/P20/738/2083/2343ESR/NAK80/S136 etc.Mould Base： LKM Mould Base or others. Part...
Double Shot Mould
Mould Name： Double Shot Mould，Part Material：SAN+TPE，Product Size： 293*110.5*1.6 MM，Product Description: Water Tank Cover for a steamer
The part molding by 2K Mouldhas been recognized by more and more people because it is superior to traditional injection-good structures and appearances. 2K or 'two-shot' injection moulding consists of processing two different polymers (or two different colors of one polymer) into an end product by means of one injection moulding process.
A two-color injection mould refers to a molding process in which two different materials are injection molded into the same set of moulds to form an injection molded part from two materials. Some materials are of two different colors, some are soft and hard, and are molded by the same injection molding machine with two sets of injection mechanical equipment (two-color injection molding machine), and two kinds of plastics are injected in sequence.
After the mold is clamped, the first material is injected into the mold to form first plastic parts, and after the injection is completed, the mould is opened, the first product is left in the core side, and the template is rotated by 180 degrees, then the mould is closed again and the 2nd plastic resin is injected into the mould through the second barrel to form a two-color product.
What is the difference between a 2K mould and a normal mould?
The appearance of the product made by the two-color mould is more beautiful than that produced by the single-color mold, and it is easy to change the color without painting. The disadvantage is the high cost and high technical requirements.
The 2K injection molding is formed by mixing two materials, The two materials must have good bonding strength. In order to ensure good bonding strength, the bonding performance test must be carried out first, and the bonding performance is confirmed to be put into production.
The two cores of the 2K mould are the same, and the cavity is different.
The cavity and core of the double shot mould must be matched, which requires precise positioning of the mold base.
In the second injection molding of the two-color mold, in order to avoid the 2nd cavity scratching the first molded product, it is possible to design some clearance, but the strength of each sealing position must be carefully considered.
Two-color product application range:
Product function requirements, such as some light-transmitting buttons, power switch, remote control buttons, car switches, etc..
Improve the touch feel. Some hand-held products use soft rubber to feel comfortable, such as toothbrushes.
Increase the aesthetic appearance of the product, such as some two-color buttons and the logo of appearance parts, which are beautiful and will not be rubbed off.
The top and bottom covers of some electronic products, or the plastic cover with waterproof performance.
The nozzle of the 2k injection molding machine mainly has two parallel injection systems or is L-shaped.
HanKing Mouldis a professional two shot moulding ltd, we provide chinese molding, plastic injection molding, 2k mould and etc. Want to know 2k moulding definitionor 2k moulding process
? Please contact us.
在线联系供应商
Other supplier products
 |
Precision Mould | ABS Mold ABS full name Acrylonitril Butadiene Styrene copolymer, with excellent comprehensive physical and mechanical properties, excellent low tem... |
 |
Insert Molding | What is medical insert molding? Insert molding toolingrefers to a molding process in which an integrated product is made by inserting a pre-prep... |
 |
2k Injection Mold | 2k mouldspecification Part function: Water plastic manifold Part material: PP & TPE Shrinkage: 1.6% Cavity: 1 cavity Mould base: 1.1730 A... |
 |
Custom Injection Mold Making Services for Auto Parts | Mould Type: Automotive Final Sensor Production Material: 33% glass fiber reinforced, black PA 6/12 No of Cavities: 4 cavities Core Material: S7... |
 |
Family Mould | As one of the most professional Chinese molding companies, we offer various plastic moldingwith high-quality, such as industrial mouldand so on. F... |
Same products
 |
Microcrystalline wax used for packaging protection | 卖方: Syntop chemical Co.,Ltd. | Microcrystalline wax is a versatile industrial wax suitable for a wide range of applications, wit... |
 |
Super Impeller aerator (water- cooled motor) | 卖方: Taizhou Jinhu Mechanical & Electrical Co., Ltd. | Taizhou Jinhu Mechanical & Electrical Co., Ltd. offers the Super Impeller Aerator (Water-Cool... |
 |
Microcrystalline wax used as physical antioxidant and processing aid | 卖方: Syntop chemical Co.,Ltd. | The core function of industrial-grade microcrystalline wax is to serve as a modifier, thickener, ... |
 |
"China factory Conductivity electrode T6J4B3 for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Conductivity electrode T6J4B3 for power station Selection of advanced technology, ... |
 |
Microcrystalline wax with high melting point and good stability | 卖方: Syntop chemical Co.,Ltd. | Microcrystalline wax with a high melting point has a wide range of applications, and its core val... |
