Explore More Insulation Cardboard Drying Machines Products
It is an advanced process method to dry and mold the insulated board with high-frequency electric field.
This production method has many obvious advantages compared with the traditional steam, electric drying, and hot air processing methods.
The high-frequency drying equipment developed by our company for high voltage transformer's insulation board is advanced in technology and perfect in function. For many years, it has been applied to a large number of large enterprises at home and abroad. All get well received by users both at home and abroad.
Unlike traditional heating, high-frequency heating uses the strong penetration ability of high-frequency electric field (high-frequency electric field penetrability is far stronger than microwave), which makes the material molecules repeatedly polarized, resulting in severe friction and self-heating from inside to outside. It does not require any preheating and heat conduction, so its heating efficiency is very high.
In addition, high-frequency heating is superior to traditional drying and microwave drying, that is, the electric field can realize selective heating through mold, concentrate energy on the location where heat is needed, and further avoid unnecessary consumption.
Therefore, it can not only greatly save energy, but also greatly shorten the heating time and improve the production efficiency.
Angle ring heating time usually chord length 550mm and thickness 2.5-3mm of not more than 6 minutes, chord 700mm angle ring heating time is 8 minutes. If the multi-layer material is dried together at the same time, the cost will be reduced more.
Because in the heating process, the material of the water evaporated quickly, and the heat dissipation condition is better than the inner surface, the inner temperature will be slightly higher than the outer layer, according to the material drying theory: with heating process, maintain steam pressure and heat transfer in the same direction is most conducive to the drying of materials.
This heating method not only makes the internal fast and thorough but also completely avoids the phenomenon of the external coke.
Because of the high-frequency electric field heating both inside and outside, it is more suitable for the insulation material or multi-layer material to be heated at the same time.
When the material is heated in the high-frequency electric field, the equipment will put pressure on the mold, so that the material in the water was a lot of extrusion and molding in the electric heating at the same time.
In this process, if the material itself contains impurities like metal powder with low insulating, impurity will produce high temperature overheating and even breakdown insulating board in the high-frequency electrical field. At this time the equipment will warn alert，and start the protection system so that the disqualified material is eliminated during the heating process.
Ensure the quality of the product so that it is suitable for higher insulation requirements.
This high-frequency drying equipment does not require any auxiliary equipment. After electrifying and material loading, the whole drying process can be completed by pressing a button. The operation is very simple.
There is no pollution to the environment. Without any dust, smoke or high temperature.
The national high-frequency electric field leakage standard: 25V/m, our company's equipment is tightly shielded by various protection technologies. The measured leakage value is only 0.2-1V/m, which is 20 times better than the national standard. Effectively protect the human body and protect other equipment from the high-frequency electric field.
Liaoning Unify High-Frequency Equipment Co., Ltd. is a professional pvc welding machine manufacturers, we provide hf machine, cardboard insulationand etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
High Disposition Car Sunvisor Welder | Equipment Description of High Disposition Automotive mat welding machine Our company's production of high-frequency welding machines for sun visors... |
 |
HF Industrial Belt Welders | Industrial belt with skirt welding machine: this machine is applicable to PVC/PU industrial belt plate, conveyor belt, running belt, etc. Double - ... |
 |
Medical Bags Welders | Liaoning Yufei high-frequency welding equipment co,.ltd has been developing and manufacturing machines for the medical industry for over 60 years. ... |
|
|
Car Seat Embossing HF Welder | Equipment Description ofCar Seat Embossing Hf Welder The two sides of theseat cover welding machinecan be set up with three sections of adjusta... |
 |
HF Industrial Belt Welders | The scope ans application of conveyor belt welding machinein Liaoning Yufei company for treadmill and conveyor belt, treadmill belt, side wall, pro... |
Same products
 |
多哥细胞冷冻容器KGSQ液氮野外罐 | 卖方: 河南天之道生物科技有限公司 | 液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用... |
 |
White Fiberglass Surface, Packaging Type: Roll at | 卖方: Jiangsu Zeyusen Carbon Fiber Technology Co., Ltd. | Fiberglass surface mat is mainly used in the surface layer of fiberglass merchandise, it has th... |
 |
布隆迪细胞储存液氮容器 KGSQ 冷冻杜瓦瓶 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用... |
 |
3x large magnifying glass with LED - evenly illuminates viewing area | 卖方: PHONEFIX technology Co.,Ltd | RECTANGULAR SHAPES THE WAY YOU NATURALLY READ: The rectangular lens is especially design to sim... |
 |
NDT3055L 3055L SOT-223 汽车电脑板 晶体管 | 卖方: 深圳维客修有限公司 | NDT3055L 3055L SOT-223汽车电脑板晶体管是现代汽车电脑维修中使用的关键部件。 作为一名技术精湛的手机维修专家，我了解确保所有组件顺利运行以保证汽车电脑系统的最佳性能和使用寿命... |
