Forged Flanges
We are forged flanges manufacturer, supplier and exporter for a wide range of quality industrial forged steel flangesincluding welding neck flange, slip-on flanges, socket weld flanges, blind flanges and other shapes for connection applications in the oil, gas, chemical, wind, pharmaceutical and other industries, manufactured in accordance with ASME , DIN, JIS, GB, ANSI, GOST, EN, BS and other engineering standards.
Pipe flange facing of america system, ring joint face except raised face, large or smalltongue face and groove face, large or smallmale face and female face, all can be manufactured according to standard.
Orifice flange equipped with orifice plate is used to measure the flow.Theere are two symmetrical, radial through holes in flange which is parallel to the sealed face.The distance to the sealed face is 0.94inch(23.9mm). They are equipped with two plugs of size NPT 1/2 mating the threaded hole in the outer end. The diameter of through holes as following.
Forged Flanges Type：
SW;WN;SO;BL;LJ;TH ; FF,RTJ
Forged Flanges Forming:
Forged
Forged Flanges Size:
1/2”—120”
Forged Flanges Standard:
GB9112~9124, GB13402, SH3406, HG20615~20623, HG20592~20605, JB74~90, ISO7005-I, ASME/ASNI B16.5/16.36/16.47A/16.47B, MSS SP44, JIS B2220-2001, DIN 2527/2636/2637/2638/2566/2576/2632/2633/2635/2642/2653/2655/2656, DIN2628/DIN2629, DIN2634 , BS 1560-3.1, BS4504-3.1, API 7S-15, API 7S-43, API 605, NFE 29-203 GOST12821 GOST 12820
Forged Flanges Rating:
ANSI 150LBS~2500LBS
DIN PN6~PN400
JIS 5K~30K
HG PN0.25~PN25
Forged Flanges Material:
Stainless Steel：
OCr18Ni9, 0Cr18Ni9Ti, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti, 00Cr19Ni10, 00Cr17Ni14Mo2, ASTM A182-F304, F304L, F304H, F316, F316L, F321, F321H, F347H, F317,
Super Stainless Steel:
ASTM A182-904L, 317, 317L
Duplex Steel：
ASTM A182-F51, F53, F44
Special Steel：
N06600, N08800, N08811
Alloy Steel：
16Mn, 12CrMo, 15Cr5Mo, Cr5Mo, 12Cr1MoV, ASTM A182-F11, F22, F91 F9 F5
Pipe Line：
ASTM A694-F42, F46, F48, F50, F52, F56, F60, F65, F70, F80
Carbon Steel：
ASTM A350-LF2, LF3 Q235A, 20#, ASTM A105
Tolerance of flange (ASME /ANSI standard)
|
Thread ,Socket-welding,Slip-on, Lap joint and Blind flange Tolerence |
Welding neck raised face flange tolerence |
||||
|
Outside Diameter |
≦24" |
±1.6mm |
Outside Diameter |
≦24" |
±1.6mm |
|
>24" |
±3.2mm |
>24" |
±3.2mm |
||
|
Inside Diameter |
Threaded |
Within limits on boring gauge |
Inside Diameter |
≦10” |
±0.8mm |
|
Socket-welding |
ID≦10"+0.8mm ID≧12"+1.6mm |
<20” |
±1.6mm |
||
|
Slip on |
≧20” |
-1.6mm +3.2mm |
|||
|
Lap joint |
Diameter of hu at base |
≦24” |
±1.6mm |
||
|
Outside Diameter of Hub |
≦5" |
+2.4mm -0.8mm |
>24” |
±3.2mm |
|
|
≧6" |
+ 4.0mm -0.8mm |
Diameter of hub at point of welding |
≦5" |
-0.8mm +2.4mm |
|
|
Diameter of contact face |
1/16”raised face |
±0.8mm |
≧6" |
-0.8mm +4.0mm |
|
|
1/4”raised face tongue&groove male,female |
±0.4mm |
Diameter of contact face |
1/16”raised face |
±0.8mm |
|
|
Diameter of counterbore |
Same as for inside diameter |
1/4”raised face tongue&groove male,female |
±0.4mm |
||
|
Drilling |
Bolt circle |
±1.6mm |
Drilling |
Bolt circle |
±1.6mm |
|
Bolt hole spacing |
±0.8mm |
Bolt hole spacing |
±0.8mm |
||
|
Eccentricity of bolt circle with respect to facing |
<2-1/2” Max 0.8mm ≧3” Max 1.6mm |
Eccentricity of bolt circle with respect to facing |
<2-1/2” Max 0.8mm ≧3” Max 1.6mm |
||
|
Eccentricity of bolt circle with respect to bore |
Max 0.8mm |
Eccentricity of bolt circle with respect to bore |
Max 0.8mm |
||
|
Eccentricity of facing with respect to bore |
Max 0.8mm |
Eccentricity of facing with respect to bore |
Max 0.8mm |
||
|
Thickness |
≦18” |
0-+3.2mm |
Thickness |
≦18” |
1-+3.2mm |
|
≧20” |
0-+4.8mm |
≧20” |
1-+4.8mm |
||
|
Length thru hub |
≦10” |
±1.6mm |
Length thru hub |
≦10” |
±1.6mm |
|
≧12” |
±1.6mm |
≧12” |
±1.6mm |
||
在线联系供应商
Other supplier products
 |
Bright Annealed Tubes | Similar Products Heat Exchanger Tubes 100% PMI test, 100% Hydraulic test, 100% inner cleaned by sponge, 100% Dimension test, 100% Surface test. ... |
 |
Hexagon Steel Tubing | Product description Hexagon steel tube/Hex tube steel is the general name of all section shape of steel tube except circular tube. There are welde... |
 |
Coiled Tubing | Product description Coiled Tubing Description Huashang seamless coiled tubing we produce can reach more than 1000 meters, which particularly reduce... |
 |
Forged Rings | Product description Forged Rings Features Forming type :forging Rating: ANSI150LBS~2500LBS, DIN PN6~PN160 JIS 5K~30K, HG PN0.25~PN25 Size :1... |
 |
Bright Annealed Tubes | Product description Bright Annealed Tubes Description Bright annealed stainless steel tube is a kind of high precision steel tube material after fi... |
Same products
 |
MONSA® DDAC-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
 |
MONSA® CTAC-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... |
 |
MONSA® CTAC-30 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... |
 |
共轨喷油器 | 卖方: 德艾普(厦门)进出口有限公司 | 商品名称：柴油喷油器型号： 最小起订量：1 件 材质：钢 包装详情：纸箱包装 库存：有库存 品牌：CNDIP 质保：6个月 |
