M10 Solar Cell

Established in 2006, Sunrise Energy Co., Ltd, is located in Changzhou, China, with 35,000m² automatic production workshops and has supplied solar products china, industrial solar solutions,and customized service to more than 50 countries all over the world.

Compared with the existing product span, equipment, process, auxiliary material maturity, production line upgrading difficulty, and current product yield, and other factors, the M10 cellis the best size to achieve ultra-high power modules, more mature industrial ecology, fewer transportation problems.

Higher Generation Process Of The Modules

The P-type bifacial solarcell could provide up to 30% of the gain in the generation process of the modules, as for the mono perc celltechnology has a higher conversion efficiency than the full piece

Lower Rated Operating Temperature

Compared with the full cell modules, the temperature of the half-cut solar cell module is 2-3 degrees lower, the hot spot temperature is 10-20 degrees lower

Lower Shadow Shielding Loss

Monocrystalline cells

have a lower shadow shielding loss.

The P-type bifacial solar cellscould provide up to 30% of the gain in the generation process of the modules, as the half-cut cell technology has a higher conversion efficiency than the full piece, and also with a lower-rated operating temperature. Compared with the full cell modules, the temperature of the half-cut cell module is 2-3 degrees lower, the hot spot temperature is 10-20 degrees lower, and it has a lower shadow shielding loss.

Compared with the existing product span, equipment, process, auxiliary material maturity, production line upgrading difficulty, and current product yield, and other factors, the M10 busbar P-type bifacial half-cut cell is the best size to achieve ultra-high power modules, more mature industrial ecology, fewer transportation problems.

Applications of the M10 Solar Cells

Sunrise M10 cell is mainly used for Aquaman series solar modules. It supports single-sided, double-sided, and all-black customization requirements. The size can be provided according to the installation scene, such as 108 cells, 120 cells, 144 cells, 156 cells, etc. After high-precision packaging The maximum module power is 595w.In distributed photovoltaic systems, medium and large ground power stations have mature applications. Compared with conventional modules, M10 modules are the optimal size to match the market.

Other supplier products

	PV System	PV SYSTEMS On Grid PV system Self-generation, surplus power online, monthly income from electricity sales, 20%-25% higher than the bank interes...
	Off Grid Residential Solar Panels	The household system based on module design is a key power generation facility built by the country for poverty alleviation in underdeveloped areas...
	Monocry Stalline Solar Cells	Perc MonocrystallineStalline Solar Cells Using diamond wire cutting technology and thin manufacturing technology, with high precision and high f...
	UTILITY	Established in 2006, Sunrise Energy Co., Ltd, is located in Changzhou, China, with 35,000m² automatic production workshops and has supplied so...
	ON GRID SOLAR PANEL	What Is a Grid Connected PVSystem? The generated electricity will be fed into the grid, and the grid is used as an energy storage device. When t...

供应产品

Same products

	FT wax used for EVA-based hot melt adhesive	卖方: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	卖方: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	卖方: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	卖方: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	卖方: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...