Sintered Neodymium Magnets
Sintered neodymium magnetis the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high coercive forces. Examples of applications include permanent magnet motors, loudspeakers, magnetic separators, wind power generators, computer hard drive, and MRI devices.
For more technical information of our sintered neodymium magnet, please refer to the sections of Technological Advantages, Demagnetization Curve, Grades, Magnetic Properties, Physical Properties, Magnetic Parameters, Surface Treatment, Magnetization Orientations.
Technological Advantages
High Coercive Force
Highest Intrinsic coercive force Hcj≥35kOe
High Consistency
CPK of Remanence (Br) and Intrinsic coercive force (Hcj)>1.67
Low Reversible Temperature Coefficient
αBr=-0.08%/℃, βHcj=-0.4%/℃
Low Weight Loss
130℃, humidity 100%, vapor pressure 2.7bar, 20days, average weight loss<2mg/cm2
Grades
The Grade of a magnet generally indicates how "strong" a magnet material is, which is measured by the Maximum Energy Product. The energy product is commonly specified in units of Gauss Oersted. The higher the grade the "stronger" the magnet. The grade also tells the temperature rating of a magnet material. Neodymium magnets have different heat tolerances which determine their maximum working temperature. As the heat tolerance increases the maximum available flux density decreases.
Notes:
Surface Treatment
As Neodymium magnet is prone to corrosion, it is usually preferable for the magnet to be coated for protection. Among a variety of options for coatings, nickel and nickel-copper-nickel are the most commonly used, making the magnet more corrosion resistant and durable.
Magnetization Orientations
Magnets can be delivered magnetized and un-magnetized. Some production methods require the magnets being incorporated into assemblies in a un-magnetized state and magnetized later once the assembly is completed. There are various magnetic orientations available for different shapes of magnets.
在线联系供应商
Other supplier products
 |
Rubber Coated Magnets | Material SinteredNeodymiumIronBoron,Rubber,Steel Dimensions Round/Rectangular Customized PullForce 8lbs—50lbs Magneti... |
 |
Custom Neodymium Magnets | Custom Neodymium Magnets Material SinteredNeodymiumIronBoron Dimensions Customized Tolerance Standard+/-0.05mm,Min.+/-0.01mm ... |
 |
Magnetic Assemblies | Magnet assemblyincorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achiev... |
 |
Hook Magnets | Magnetic Hooks for Sale Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Pull Force ... |
 |
Countersunk/Counterbore Pot Magnets | Material SinteredNeodymiumIronBoron,Steel Dimensions Diameter PullForce 10lbs—900lbs MagnetizationOrientation Axial ... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | 卖方: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | 卖方: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Common Rail injector control valve F00VC01200 | 卖方: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Injector Control Valve Plate 24# | 卖方: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
 |
Injector Control Valve Plate 12# | 卖方: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
