F-1300 Mud Pump
Features
F 1300 mud pumpfor oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet the drilling requirements such as high pressure and big displacements whether in land drilling or off-shore drilling.
F 1300 mud pumps have a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of mud pump fluid end parts greatly.
Forced lubrication combined with splash lubrication to make lubrication effect perfect;
F Series Mud Pumps are manufactured under standard of API Spec 7k, mud pump parts at the fluid end are interchangeable with the parts that are in conformity with API Spec.
The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance.
Performance of mud pump was greatly improved by durable fluid end; and examination, mud pump repair and mud pump maintenance are easier to make due to its independent structure.
F-1300 mud pump specification
|
Model |
F-1300 |
|
Rated Power (kW/HP) |
969/1300 |
|
Type |
Triplex Single-Acting |
|
Strokes per minute |
120 |
|
Stroke Length(mm/in) |
305/12" |
|
180/7" |
|
|
Gear Type |
Herringbone Gear |
|
Valve Pot |
API-7# |
|
Gear Ratio |
|
|
Dia of Suction Inlet(mm/in) |
305/12" |
|
Dia of Discharge Outlet |
5 1/8"flange |
|
5000psi |
|
|
Max Pressure(Mpa/psi) |
|
|
Overall Dimensions(mm/in) |
4617*3260*2600 / 82"*128"*102" |
|
Weight kg(lb) |
As one of the most professional oilfield equipment companies, we provide china mud pump parts, discharge manifold equipment, oil drilling tools equipment, china mud pump partsand etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Brief Introduction and Characteristics of Reciprocating Pump | Brief Introduction and Characteristics of Reciprocating Pump Single and double acting reciprocating pumprelies on the reciprocating operation of p... |
 |
Fig 200 Hammer Union | Fig 200 Hammer Union fig-200.jpg Working Pressure: 2,000 psi(138 bar) Features: Economical,general-purpose union 1-to 4-inch sizes Butt-weld ava... |
 |
Cylindrical Roller Bearing | Dezhou Rundong Petroleum Machinery Co., Ltd,oilfield equipment companies, is a professional company with 20 years history in manufacturing of oil ... |
 |
Drilling Pump Gasket | Drilling Pump Gasket Our oilfield supply companyprovides different seal rings and O rings for F-500, F-800/1000, F-1300/1600, 3NB-1000, 3NB-1300C,... |
 |
Fig 400 Hammer Union | Fig 400 Hammer Union Working Pressure: 4,000psi(276 bar)through 4-inch sizes; 2,500psi(172 bar)through 5 to 12-inch sizes Features: 21/2-through... |
Same products
 |
Hexagonal Shaft | 卖方: NANJING LESUN SCREW CO.,LTD | Rectangular splines are mostly six splines. This type of spline is better than a single key and c... |
 |
Side Feeder Elements | 卖方: NANJING LESUN SCREW CO.,LTD | Side Feeder Elements This side extruder feed screwis to help the bulk materials that are fed into... |
 |
Screw Shaft | 卖方: NANJING LESUN SCREW CO.,LTD | Screw ShaftManufacturer Screw Shaft Diameter: φ20 mm ~φ300 mm Screw Shaft Properties: Wea... |
 |
Kneading Screw Elements | 卖方: NANJING LESUN SCREW CO.,LTD | Kneading Screw Elements Manufacturer Kneading ElementDiameter: φ20 mm ~φ300 mm Kneading b... |
 |
Mixing Rotor | 卖方: NANJING LESUN SCREW CO.,LTD | Good force pull on the material ,meanwhile the material can be fully distributed evenly without s... |
