Silver Flex Membrane Switches
The most common structure in custom Flex membrane switches is Silver Flex Membrane Switches. The conductive ink, carbon oil, and UV ink are printed on Polyester by screen printing, and the other layers are separated by adhesive. The LED can also be installed in the lower line to form a simple membrane switch with the shrapnel. The simplest structure is a single button membrane switch. The product is very thin, the cost is more affordable and easy to customize. Niceone-tech believes that the metal dome switch has a more obvious feel than the touch screen, and the membrane switch has better auditory, visual, and physiological effects for the touch screen.
What Are the Silver Flex MembraneSwitch Design Options?
Digital and/or screen printed on the backside. The effect can be customized according to your requirements including glass, metal, wood, and stone. If the panel is in a more severe environment, we can even use hardened glass and stainless steel as the panel material. It is very important to choose Overlay printing according to requirements.
The window needs raw materials to be transparent, frosted, transparent or colored. The window of the membrane switch is different, and the choice of materials is also very different. When the window is large, and it is required to clearly see the bottom LCD or touch screen. EBG series is a good choice, the material is scratch resistant. If it is just a panel, then PC or Lexan overlay is also feasible
Selective textures and UV hard-coat surface finishes
Tactile or nontactile, snap dome, or nonsnap dome.
Pillow rim-embossed membrane switch panels
Optically clear adhesive (OCA), liquid optically clear adhesive, air gap
EMI/RFI shielding
Rigid support backers for membrane switch and panel such as aluminum and FR4 with PEM mounting fasteners
Standard connectors (material choices & specifications) such as cjt, cinematic and Molex, etc
Contact Niceone-tech now to learn more about the various constructions and product features we can offer, And learn how Nicole tech can customize your membrane switch to meet and exceed your unique application requirements. Visit our product gallery to learn more about the various constructions and product features we can offer, and learn how Niceone-tech can customize your membrane switch to meet and exceed your unique application requirements.
What areas can the silver membrane switch panel be used in?
Medical
Military
Industrial controls
Aerospace
Marine navigation
Lighting & Lighting Controls
CAN/BUS Controls
Food Equipment
Appliance
Automotive
Agricultural
Sporting Goods
Health & fitness equipment
Silver Flex Membrane Switches Structure：Silver_Flex_Membrane_Switches.png
Overlay-Polyester is usually the first choice for membrane switch panel materials because its life will be a little longer than Polycarbonate. If it is simply a panel instead of a membrane switch, Lexan and Polyester are also good choices. The overlay is the most intuitive form of the human-machine interface. Niceone-tech will screen print or digital print on the back of the material, and they can also be used in combination. Special requirements such as the mirror silver effect are also feasible.
Overlay adhesive-As the first layer of adhesive paper under the panel, the Acrylic adhesive is usually used, generally, the thickness is between 0.125-0.225mm. If it is an LGF membrane switch (to LGF membrane switch) structure, the thickness sometimes reaches 0.64mm.
Top Circuit Layer (Dome retainer): This layer usually has three functions: 1. As the Dome Retainer, it ensures that the Snap dome of the circuit layer will not form shrapnel movement due to triggering and closing, resulting in circuit failure and circuit wear. 2. Use 0.1-0.125mm Polyester printing conductive ink, carbon oil, and UV ink as the upper line. This layer structure can also be convex to make tactile feedback better. 3. Can be used as an ESD shielding layer.
Circuit Spacer (switch spacer): Both upper and lower lines are printed with conductive ink, usually thicker tape is used to separate the upper and lower lines to avoid direct conduction of the membrane switch. If the upper circuit is only used as a fixed layer, then the general thickness of the Overlay adhesive + Top Circuit Layer + Lower Circuit Layer should be greater than 0.4mm, otherwise, the panel will squeeze the shrapnel to make them feel worse. Unless the panel is convex, the four-layer structure is less than 0.4mm.
Lower Circuit Layer: The thickness of this layer circuit is usually 0.1-0.188mm. It can be printed with ink, carbon oil, and UV ink. LEDs can also be installed. Some membrane switch panels will choose the copper flex or Printing circuit Board as the circuit. Compared with Polyester, their performance will be more stable. More often applied to the medical and military industries. If it is copper flex or Printing circuit Board as a line, Niceone-tech can even install a variety of components on the line.
Rear Adhesive: There are many choices, but the most commonly used are 3M200MP series or 3M300LSE. According to the different products of membrane switch lamination, Niceone-tech will recommend 3M300LSE if it needs higher viscosity.
Rigid Support Layer: This layer structure is generally used as the last layer of the membrane switch, which can make the structure of the membrane switch component more complete. Usually, the choice of materials is AL, FR4, PC, or steel. If AL is selected, nuts or feet may sometimes be added to the back of the product.
As a membrane keypad manufacturer, we have types of waterproof membrane switchfor sale, if you have needs, please leave us a message.
在线联系供应商
Other supplier products
 |
Waterproof Membrane Switch | Common membrane switches have good water resistance, and are also very good in related oil, dust, and moisture resistance, and can be used in a var... |
 |
Metal Dome Switch | Niceone-tech is a professional (HMI) human machine interface control modulemanufacturer . Niceone-tech has always been people-oriented, and should... |
 |
MEMBRANE SWITCHES | Membrane switches are simply a part of electronic equipment and are often regarded as user interfaces or human-machine interfaces, making it easier... |
 |
Custom Membrane Keypad | Advantages of Membrane Keypad China Thin and LightweightThin and Lightweight Membrane keypads are incredibly thin and lightweight, making them id... |
 |
Capacitive Membrane Switch | Niceone-tech is a professional human machine interface control modulemanufacturer. Niceone-tech has always been people-oriented, and should constan... |
Same products
 |
Washable Cheap 13.56Mhz 213 Nfc Mini Stickers 13.56 Mhz RFID Label Sticker Tag HF/UHF Tags Dry Inlay | 卖方: XIUCHENG RFID | ize：On request Material:PET, PVC,paper or customized Frequency:UHF/HF Printing:Thermal transfe... |
 |
Micronized wax used for industrial paint processing | 卖方: Syntop chemical Co.,Ltd. | Micronized wax is a vital functional additive in industrial paint processing, with primary functi... |
 |
Plant Growth Regulator Manufacturer | 卖方: HEBEI LAIKE BIOTECH CO.LTD | Plant Growth Regulator Manufacturer Plant Growth Regulator Manufacturer - Laike Biotech spec... |
 |
Fungicide Supplier | 卖方: HEBEI LAIKE BIOTECH CO.LTD | Fungicide Supplier Wholesale Fungicide - Laike Biotech is a professional supplier and manufa... |
 |
Fungicide Supplier | 卖方: HEBEI LAIKE BIOTECH CO.LTD | Fungicide Supplier Wholesale Fungicide - Laike Biotech is a professional supplier and manufa... |
