AG-26 Magnetic Cylinder Sensor
AG-26 series magnetic sensor
AG-26 series is generally used for 4φ diameter C-shaped grooved cylinders. There are six specifications such as magnetic reed tube type and electronic type to choose from. With adapters, it can be used for 6-63φ cylinder diameter round cylinders. It is ALIF’s 4φC type. One of the most widely used series of grooved cylinders, greatly reducing the pressure on purchasing inventory.
Specification of AG-26 Magnetic Cylinder Sensor
|
Model |
AG-26DF |
AG-26N |
AG-26P |
|
Switching Logic |
Normally Open |
Solid State Output, Normally Open |
|
|
Output Type |
2 Wire Solid State |
NPN Current Sinking |
PNP Current Sinking |
|
voltage Range |
10～30V DC |
5～30V DC |
|
|
Sensor Current |
1～50 mA |
0～100 mA |
|
|
Switch Rating |
3W Max. |
||
|
Consumption |
/ |
3 mA Max.@24V |
|
|
Voltage Drop |
|||
|
Leakage Current |
90 μA Max.@28V |
||
|
Indicator |
Red LED |
Red LED |
Green LED |
|
Cable |
Φ2.2, 2C, Grey Oil-Resistant PUR |
Φ2.2, 3C, Grey Oil-Resistant PUR |
|
|
Sensitivity |
40～800 Gauss |
40～800 Gauss |
|
|
Sensor Frequency |
900Hz |
900Hz |
|
|
Temperature |
-10～70℃ |
-10～70℃ |
|
|
Shock |
50G |
50G |
|
|
Vibration |
9G |
9G |
|
|
Ingress Protection |
IP68 (GB/T4208-2017) |
IP68 (GB/T4208-2017) |
|
|
Protection Circuit |
Surge Suppression |
Power Reverse Polarity; Surge Suppression |
|
|
CE Certificate NO. |
E8A 17 04 53334 007 |
E8A 17 04 53334 008 |
|
|
CNEx Certificate NO. |
|||
|
RoHS 2011/65/EU & (EU) 2015/863 |
|||
|
Reach NO. |
(EC) N 1907/2006 (REACH) |
||
ALIF Technology provides alif sensor, hydraulic cylinder stroke position sensor, pneumatic cylinder sensors, etc. For more information about cylinder position sensor symptoms, please feel free to contact us!
在线联系供应商
Other supplier products
 |
AG-29 Magnetic Cylinder Sensor | AG-29 series magnetic sensor AG-29 series is the smallest magnetic switch in the world so far. It is suitable for 4φ C-slot cylinder. Althou... |
 |
Sensor Clamp | The length of the steel belt can be adjusted. The appropriate steel belt length can be selected according to the size of the cylinder bore. Firml... |
 |
DFGG Magnetic Cylinder Sensor | DFGG series magnetic sensor DFGG series dedicated to AirTAC 4.35*4.55 square groove, can be replaced with AIRTAC DS1-G magnetic sensor. Specifi... |
 |
PBN Sensor Clamp | Special for DFGH/DFGG series, PBN Clamp is fixed on full bore Round cylinder. Specification of PBN Clamp in Sensor Brand ALIF ... |
 |
AG-39 Magnetic Cylinder Sensor | AG-39 series magnetic induction sensor AG-39 series adopts special peak-shaped screws, which can be used for most brands of T-slot cylinders suc... |
