KE300A-12 Series Single-Phase 220-In, Three-Phase 380-Out Special Inverter

For the civil power (220V), the motor uses 380V field application characteristics, developed a special product which designed with module boosting technology. Optimizing performance design will make the drive no longer complicated. It integrates PG-free vector control, multi-stage V/f control, torque control and soft start functions, and is widely used in applications where speed control accuracy, torque response speed, and low-frequency torque output have higher requirements

Features of KE300A-12 Series Single-Phase 220-In, Three-Phase 380-Out Special Inverter

Easy to install and debug

Solid EMC design, unique radiator shape.

Adopt modular design

The main control system uses 32-bit high-speed DSP, integrated PG-free vector control, V/f control, and torque control.

The optimized motor parameter identification model can effectively reduce the sensitivity to motor parameters and make self-learning more accurate.

High starting torque: 150% of starting torque can be provided when it is at 0.5Hz;

Fast dynamic response: Under the vector control mode without PG, the dynamic response time is less than 20ms;

Built-in PID regulator can easily form a closed-loop control system for process quantities such as temperature, pressure and flow.

It has automatic fault reset and power-off reset functions to ensure continuous production and production efficiency.

Perfect protection functions: overvoltage/under-voltage protection, inverter overheat protection, ground fault protection, short circuit protection, overcurrent protection, overload protection, etc.

Specifications of KE300A-12 Series Single-Phase 220-In, Three-Phase 380-Out Special Inverter


Technical Index



Input voltage

1AC 220V±15%

Input frequency



Output voltage

0~rated input voltage

Output frequency

V/f control: 0~3000HzSensorless vector control: 0~300Hz

Operation command mode

Keypad controlTerminal controlSerial communication control

Frequency setting mode

Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combined & switched in various modes.

Overload capacity

G model: 150% 60s, 180% 10s, 200% 3s P model: 120% 60s, 150% 10s, 180% 3s

Starting torque

Speed adjustment range

1:100 (SVC), 1:50 (V/f)

Carrier frequency

  1. ,automatically adjusted according to temperature and load characteristics

Frequency accuracy

Digital setting: 0.01HzAnalog setting: maximum frequency * 0.05%

Torque boost

Automatically torque boost; manually torque boost: 0.1%~30.0%

V/f curve

Three types: linear, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square)

Acceleration/decele ration mode

Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.1s~3600.0s

DC braking

DC braking when starting and stoppingDC braking frequency: 0.0Hz~maximum frequency, braking time: 0.0s~100.0s

Jog operation

Jog operation frequency: 0.0Hz~maximum frequencyJog acceleration/deceleration time: 0.1s~3600.0s

Simple PLC & multi-step speed operation

It can realize a maximum of 16 segments speed running via the built-in PLC or control terminal.

Built-in PID

Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.)

Automatic voltage regulation

Keep output voltage constant automatically when input voltage fluctuating

Control Function

Common DC bus

Common DC bus for several inverters, energy balanced automatically

Torque control

Torque control without PG

Torque limit

“Rooter” characteristics, limit the torque automatically and prevent frequent over-current tripping during the running process

Wobble frequency control

Multiple triangular-wave frequency control, special for textile

Timing/length/counting control

Timing/length/counting control function

Over-voltage & over-current stall control

Limit current & voltage automatically during the running process, prevent frequent over-current & over-voltage tripping

Fault protection function

Up to 30 fault protections including over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running status during failure & has fault automatic reset function

Input/output terminals

Input terminals

Programmable DI: 7 on-off inputs, 1 high-speed pulse input 2 programmable AI: AI1: 0~10V or 0/4~20mA A12: 0~10V or 0/4~20mA

Output terminals

1 programmable open collector output: 1 analog output (open collector output or high-speed pulse output) 2 relay output 2 analog output: 0/4~20mA or 0~10V

Communication terminals

Offer RS485 communication interface, support MODBUS-RTU communication protocol

Human machine interface

LED display

Display frequency setting, output frequency, output voltage, output current, etc.

Multifunction key

QUICK/JOG key, can be used as multifunction key


Ambient temperature

-10℃~40℃, derated 4% when the temperature rise by every 1℃(40℃~50℃).


90%RH or less (non-condensing)


≤1000M: output rated power, >1000M: output derated

Storage temperature


Storage environment

Indoor, no direct sunlight, dust, corrosive gas, flammable gas, oil mist, steam, dripping water, salt, vibration

Shenzhen MICNO Electric Co., Ltd.provides pv power booster,220 380 inverter, inverter 220 to 380,

inverter 220 380, variable speed single phase motor, distributor inverter micno, etc. Contact us to knowmore.


至: Shenzhen MICNO Electric Co., Ltd.
Your E-mail:

Send to other suppliers

Other supplier products

KE300F Open-loop Permanent Magnet Synchronous Drive
KE300F Open-loop Permanent Magnet Synchronous Drive With the world-leading sensorless current vector control technology (SVC) for synchronous motor, KE300F can accurately identify the motor parameter...
Low Voltage Soft Starter
Low Voltage Soft Starter Suitable for the start-up of squirrel-cage asynchronous motors with voltage class 380V. Low voltage soft starteris widely used in electric power, m...
Solar Pump Inverter
Solar Pump Inverter The solar pump inverter( vfd for solar pump) converts the DC power of the solar array into AC power, which can drive various pumps and provide clea...
Solar Pump Controller
Solar Pump Controller pump controller for solar water system solar pump controller manufacturer solar pump system controller/ solar well pump controller Solar Pump ...
Solar DC Combiner Box
Solar DC Combiner Box MICNO inverter combiner boxis designed for multi-input tandem photovoltaic power system bus application, set convergence, detection, monitoring an...

Same products

Work Order Management Software
Work Order Management Software 卖方: TYMO BEAUTY LIMITED Monitor the whole process from work order creation, circulation, tracking, execution to completio...
Facility Management Software
Facility Management Software 卖方: TYMO BEAUTY LIMITED Facility Maintenance Software EAMic® facility softwareprovides one-stop service for facili...
EAM/CMMS Industry Solution
EAM/CMMS Industry Solution 卖方: TYMO BEAUTY LIMITED EAMic® systems provides EAM/CMMS solution for a variety of industries. Manufacturing EA...
EAM Software Solutions
EAM Software Solutions 卖方: TYMO BEAUTY LIMITED EAMic® EAM/CMMS ValueApex EAMic® CMMSpredictive maintenance, designed and developed by...
EAM/CMMS Software
EAM/CMMS Software 卖方: TYMO BEAUTY LIMITED Enterprise Asset Management Software (cmms eam) EAMic® cmms eam softwareis not only an impor...