AUTO EVA 12 AUTOMATED PARALLEL NITROGEN EVAPORATOR

RayKol Auto EVA 12 is a nitrogen blow-down automated evaporation system that provides automated evaporation of up to 12 samples in parallel with endpoint detection. This automated evaporation systemuses vortex airflow generated from stable angled nitrogen blow, to constantly disturb the sample surface and lower its vapor pressure in order to gain gently rapid evaporation under water bath heating. Each sample position is equipped with optical sensor to precisely determine endpoint of concentration. User can have real-time monitoring to whole process through built-in touch screen, make it easier to access and observe.

AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM FEATURES

Batch processing, simultaneous evaporation of up to 12 samples in parallel

Rapid concentration under water bath and nitrogen blowing

Transparent sink design for observation

Good compatibility with various sample vials and ajustable blowing angle

Automatic endpoint detection to avoid over-drying

Sprinkle rinsing to sample vials to maximize recovery rate

AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM SPECIFICATIONS

Parameter	Specification
Concentration	Water bath heating and nitrogen blowing
Sample capacity	12
Range of concentration temperature	Room temperature to 60°C
Sample vials	65mL, 260mL; glass tube with stems
Endpoint detection
Range of gas flow rate	0 to 5.0mL/min, precise to 0.1mL/min
Software interface	10-inch built-in screen
Dimension	58cm x 46cm x 56cm
Weight	41kg
Power supply	200 to 240V, 50/60Hz
Power rate	1500W
Fume hood/ventilation	Required
Storage temperature	0 to 40°C
Storage humidity	20 to 85%
Operating temperature	10 to 40°C
Operating humidity	20 to 80%

AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM APPLICATIONS

Auto EVA 12 Automated evaporation system is designed for large-volume concentration for sample batches, typically used to evaporate extracts of soil and water samples from evironment, azo dye from textiles, fat and acid value from fried foods, as well as residues of pesticides and veternary drugs. It can be applicable in types of analysis such as:

Soil and sediment - Determination of organochlorine pesticides - GC/MS

Solid waste - Determination of polychlorinated biphenyls - GCMS

Textiles ― Determination of the banned azo colourants

AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM BENIFITS

Large sample capacity: each batch can accommodate max. 12 samples, flexible in 65mL and 260mL sample tubes, with endpoint detection.

Gradient nitrogen blowdown: achieve by controlling flow rate of nitrogen gas to increase gradually with time, to ensure efficient evaporation.

Adjustable blowdown angle: optimize the shear vortex action by adjust the angle of the needles pointing, to ensure efficient evaporation.

Sprinkle rinsing: optional configuration of rinising module can boost up the recovery rate of target analytes by flushing back the evaporated analytes.

Automatic water refill: Software control water in and out, with water level sensor to detect endpoint of refill and drain the water bath, to keep it hygiene and clean.

As a reliable automated lab systemsmanufacturer, we can offer kinds of automated lab equipmentfor sale, anything you need, please contact us.

Other supplier products

	VACUUM EVAPORATION	Raykol vacuum evaporation equipmentis an ideal solution for analytical laboratories. In the analysis of environmental pollutants and food safety, t...
	RAYKOL AUTOMATED LAB SYSTEMS	RayKol Group is dedicated to research&development and manufacture of automated laboratory systems. With systematic framework and integrated dev...
	QUECHERS EXTRACTION	As testing technology and method for food safety is developed and improved, QuEChERSmethod has become one of common sample preparation techniques t...
	SPE CARTRIDGES	RayCure SPE series provides high-quality SPE cartridges for various types of solid phase extraction, including manifold, vacuum as well as automate...
	RAYCURE QUECHERS CLEAN-UP KITS	RayCure QuEChERS Clean-up kits are used in the step of purification with salts in QuEChERS procedure, to separate target compounds from interferenc...

供应产品

Same products

	FT wax used for EVA-based hot melt adhesive	卖方: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	卖方: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	卖方: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	卖方: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	卖方: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...