.

Ceramic Mechanical Seal

Ceramic material refers to inorganic non-metallic materials made of natural or synthetic compounds through forming and sintering. It has the advantages of high melting point, high hardness, high wear resistance and oxidation resistance. It is widely used in machinery, chemical industry, petroleum, pharmaceutical, automobile and other fields. Because of its advantages, it has become Sealcon’s great choice for sealing materials.

Mechanical characteristic

Ceramic material is the material with the best rigidity and highest hardness in engineering materials, and its hardness is mostly above 1500HV. Ceramics have high compressive strength, but low tensile strength, poor plasticity and toughness.

Thermal characteristic

Ceramic materials generally have high melting point (mostly above 2000), and have excellent chemical stability at high temperature. The thermal conductivity of ceramics is lower than that of metal materials. At the same time, the linear expansion coefficient of ceramics is lower than that of metal. When temperature changes, ceramics have good dimensional stability.

Electrical characteristic

Most ceramics have good electrical insulation, so a large amount of insulation is used to make all kinds of voltages (1kV~110kV). Ferroelectric ceramics barium titanate (BaTiO3) has high dielectric constant which can be used in the production of capacitor, ferroelectric ceramics. A few ceramics also have the characteristic of semiconductor, can be a rectifier.

Chemical characteristic

Ceramic material is not easy to be oxidized at high temperature, and has good corrosion resistance to acid, alkali and salt.

Optical characteristic

Ceramic materials also have unique optical properties, which can be used as solid laser materials, optical fiber materials, optical storage containers, etc. Transparent ceramics can be used in high-pressure sodium lamp tubes.Magnetic ceramics (ferrites such as MgFe2O4, CuFe2O4, Fe3O4) have a wide range of applications in recording tapes, records, transformer cores, and large computer memory components.

Mechanical seals has the high demands about sealing materials, so the ceramic is choosed to make ceramic sealsbecause of its competitive features.

ceramic physical property

Technical parameter

unit

95%Al2O3

99%Al2O3

content of Al2O3

%

95

99

density

g/cm3

hardness

HRA

85

88

90

porosity rate

%

fractural strength

MPa

250

310

350

coefficient of heat expansion

10(-6)/K

thermal conductivity

W/M.K

26

Hangzhou Sealcon Fluid Machinery Co., Ltdproduces ceramic seal ring,ceramic shaft seal,ceramic mechanical seal,ceramic seals for water pumps,ceramic o ring,ceramic seals for pumps,ceramic pumpand hydrocarbon pump mechanical seal,contact us.



在线联系供应商

至: Hangzhou Sealcon Fluid Machinery Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Seal Spare Parts Sealing Rings
Seal Spare Parts Sealing Rings Brief Introduction of Sealing Rings The seal ring is a ring seal with the notch, it is placed in the ring groove of the sleeve, the sleeve rotates ...
Ceramic Mechanical Seal
Ceramic Mechanical Seal Ceramic material refers to inorganic non-metallic materials made of natural or synthetic compounds through forming and sintering. It has the advan...
Carbon Seal
Carbon Seal Graphite is an isoform of element carbon. In 1971, the United States studied the successful flexible graphite sealing material, which solved the le...
SINGLE CARTRIDGE SEALS
SINGLE CARTRIDGE SEALS Our single cartridge mechanical sealis manufactured by balanced seal-face technology, helping to reduce energy comsumption whilst increasing reliab...
Different Types of Water Pump Seals
Different Types of Water Pump Seals Elastomer Rubber Bellow Mechanical Seals Developed with rubber bellow, this type of seal is widely used for water, oil and other light duties appli...
供应产品

Same products

Casting Hot Fusible Film
Casting Hot Fusible Film 卖方: Pinghu Zhanpeng Hot Melt Adhesive Web & Film Co., Ltd Materials:PA,PO,EVA,PES,HDPE Thickness:0.03-0.4 mm Width:6-1500 mm Melt point:85-140℃
MULTI-STAGE SELF-PRIMING PUMP HMC
MULTI-STAGE SELF-PRIMING PUMP HMC 卖方: Edwin Industrial Co., Limited Applications For water supply from wells or reservoirs For domestic use, for civil and industrial...
ISHING TOOLS
ISHING TOOLS 卖方: SHANDONG SAIGAO GROUP CORPORATION The fishing tool is the most widely used tool for overhauling oil and water wells. There are ma...
Fishing Magnet
Fishing Magnet 卖方: SHANDONG SAIGAO GROUP CORPORATION Fishing Magnet is a junk retrieval tool designed to retrieve small metal, odd-shaped objects suc...
F500 Single-acting Mud Pump
F500 Single-acting Mud Pump 卖方: SHANDONG SAIGAO GROUP CORPORATION F500 single-acting drilling rig mud pump equipment has two surfaces which can bear high strength...