OEM Syringe Pump
oem syringe pumpusually is customized with 50ml or 100ml in higher capacity liquid handling of OEM systems. High accuracy and high repeatability make it very popular for constant specific volume dispensing system, programmable control system also make it more flexible in different applications and fields.
Specification of OEM Syringe Pump
|
Volume |
50ml, 100ml |
|
|
Accuracy |
≤1% @100% stroke |
|
|
Repeat accuracy |
||
|
Pressure |
0-1.0Mpa (air) |
0-1.2Mpa (water) |
|
Service life |
3 million times no leakage (media: water) |
|
|
Detection |
Photosensor check original piston position for accurate location |
|
|
Actuator |
Ball screw (Lead 2mm) |
|
|
Fluid path |
Borosilicate cylinder, PTFE piston, PTFE outlet |
|
|
Max pressure |
Positive air pressure 0-1.0Mpa / Negative air pressure 0-0.05Mpa |
|
|
Connection |
1/4-28UNF |
|
|
Communication |
RS232/RS485/CAN |
|
|
Baud rate |
RS232/RS485: 9600dps, 19200dps, 38400dps, 57600dps, 115200dps CAN: 100Kbps, 200Kbps, 500Kbps, 1Mbps |
|
|
Device add. & Parameter setting |
Serial Pont |
|
|
Dimension (L*W*H) |
Different model different dimension |
|
|
Power supply |
DC24V/1.5A |
|
|
Working temperature |
5 – 55℃ |
|
|
Working humidity |
< 80% relative humidity, non-condensing |
|
|
Delivery time |
About 20-25working days |
|
Driver Port of OEM Syringe Pump
|
Port |
Description |
Port |
Description |
|
H |
CANH |
B+/B- |
Phase B wiring |
|
L |
CANL |
A+/A- |
Phase A wiring |
|
A |
RS485 A |
O1 |
Optocoupler wiring |
|
B |
RS485 B |
O2 |
|
|
GND |
GND |
O3 |
|
|
RX |
RS232 RX |
V1 |
|
|
TX |
RS232 TX |
V2 |
|
|
- |
DC24V positive |
V3 |
|
|
+ |
DC24V negative |
GND |
在线联系供应商
Other supplier products
 |
Multi Channel Syringe Pump | MultiChannel Syringe Pumpis a precision syringe pump specially designed for high precision liquid handling with a small footprint applied in limite... |
 |
Luer Fittings | Luer fittings are series of plastic fittings designed with a male or female slip without any barbs or nuts to create the most convenient way to con... |
 |
Luer Fittings | Lure fitting, also known as luer to tubing connectors, are series of plastic fittings designed with a male or female slip without any barbs or nuts... |
 |
Laboratory Peristaltic Pump | Laboratory Peristaltic Pump is a bench-top type peristaltic liquid pump suitable for laboratories and production line to filling bottles or fluid m... |
 |
12v Peristaltic Pump | 12v peristaltic pumpis available of 12V and 24V DC motor for specific system requirement, the peristaltic water pump DC motor can work immediately ... |
Same products
 |
Brewery Sludge Dewatering Machine System for Sale | 卖方: Apoaqua | Sludge dewatering machine is widely used in breweries. It can improve water quality, reduce energ... |
 |
Komatsu Charge Pump | 卖方: Elephant Fluid Power | Elephant Fluid Power: Provide Komatsu hydraulic gear pump, original OEM pump parts and auxiliary ... |
 |
Linde Hydraulic Pump Parts | 卖方: Elephant Fluid Power | We regularly stock parts for the HPR, HPV Series of Linde® pumps. Elephant Fluid Power: guara... |
 |
Low-Pressure-Variable Vane Pump | 卖方: Elephant Fluid Power | Elephant Fluid Power: Provide low pressure vane pump, We can make varies of hydraulic pumpsparts ... |
 |
Nachi Charge Pump | 卖方: Elephant Fluid Power | Elephant Fluid Power: We offer NACHI Series Charge pump. Elephant Fluid Power: guarantee quality ... |
