Pulp Molded Package Production Line

Molded pulp, also named molded pulp or molded fiber, is a packaging material, typically made from recycled paperboard and/or newsprint. It is used for protective packaging or for food service trays and beverage carriers. Other typical uses are end caps, trays, plates, bowls, and clamshell containers.

For many applications, the molded pulp is less expensive than expanded polystyrene (EPS), vacuumed formed PET and PVC, corrugation, and foams.

Paper pulp molding machineis often considered a sustainable packaging equipment, it’s packing material as defined by the Sustainable Packaging Coalition, since it is produced from recycled materials, and can be recycled again after its useful life-cycle. Molded pulp products can be made waterproof with a spray or dip coating of wax.

Pulp Molded Package Production Line Series

Manual Egg Tray Production Line

Automatic Egg Tray Production Line

Apple Tray Production Line

Manual Egg Carton Production Line

Automatic Egg Carton Production Line

Small Pulp Molding Production Line

Multi-Function Pulp Molding Production Line

Types of paper pulp moulding machine

Several types of molded pulp can be manufactured by several processes.


These products usually have wall thicknesses of 1/16" to 1/4" and are used primarily for support packaging applications. Thick-Wall is also commonly referred to as "Slush Molded." The surfaces are very rough on one side and moderately smooth on the opposite side. Product definition is moderate due to the use of relatively inexpensive single-pass molds and the use of mixed recovered paper and kraft paper slurries. Typical uses are for edge and edge protector, heavy item packaging, auto replacement parts, molded pulp pallet trays etc.

Transfer Molded

A spray-molded vacuum-formed cup carrier. The open slits are formed during molding.

Transfer molded products are usually thin-walled, 1/16" to 3/16", and are the most prevalent type in use today. The process uses vacuum forming and take-off or transfer molds, where the mold is an extremely fine wire mesh in the shape of the upper/exposed surface. The fibrous slurries are frequently made up of a high percentage or entirely of recycled newspaper, which produces a relatively smooth surface on one side and a fairly smooth surface on the opposite side with good accuracy and definition.

Prior to the molding process, the mesh is mated with a vacuum chamber that draws water through the mesh into the chamber, with the mesh mold suspended above a liquid return pool. The fibrous slurry is sprayed from below onto the mold, and the vacuum draws the slurry tightly against the mesh, filling all gaps and spaces. When airflow through the mesh has been sufficiently blocked, the excess slurry falls into the return pool for recycling, and the mold advances onward to the drying process, following by separation of the mesh mold from the dried fiber plating.

Typical uses of transfer molded products are for packaging electronic equipment, cellular s, and other household and hardware items. Very high-capacity, high-speed transfer molding equipment is used to produce drink trays, cup carriers, wine shippers, egg cartons, egg trays, pulp bedpan liners, pulp urinals, fruit trays, slipper pans, commode pans, end caps, etc.

Thermoformed Fiber

This newest form of molded pulp is the highest quality of thin-walled products available today. The process uses "Cure-In-The-Mold" technology which produces well defined, smooth surfaced molded pulp products. After being formed, the product is captured in heated forming molds which presses and densifies the molded products. They are accurately formed and have the appearance of the plastic material. The products are ejected from the heated molds in their finished state as opposed to being dried in a heated oven. Typical uses for this type are for point-of-purchase packaging and those applications where high definition and appearance are of prime importance.


This type of molded pulp product is that which has undergone some kind of secondary processing which is generally different from or in addition to, the basic production procedure. This could apply to any of the first three types. Secondary processing could be coating, printing, hot-pressing, die-cutting, trimming or manufactured using colors or special slurry additives. Uses are for many kinds of custom applications.


至: Longkou City Hongrun Packing Machinery Co., Ltd.
Your E-mail:

Send to other suppliers

Other supplier products

Motorized TV Lift
Motorized TV Lift Description of Motorized TV Lift: We spent more than two years studying the TV lift system and then decided on our current model of the extendable...
Manual Egg Tray Production Line
Manual Egg Tray Production Line The manual egg tray productionline is suitable for the small-scale investment in egg tray production, such as the small chicken farm, waste cardboa...
PS Foam Sheet Extrusion Line
PS Foam Sheet Extrusion Line The PS foam sheet extrusion line adopts the twin-screw series high foam sheet production process, and the produced PS foam sheet is a new type of ...
PE Foam Fruit Net Extrusion Line
PE Foam Fruit Net Extrusion Line PE foam net is a new soft packing material. Due to its unique expanding reticulation structure and the elastic foamed net film, it is widely used i...
Disposable Food Container Production Line
Disposable Food Container Production Line The disposable food container production line was developed by combining domestic and foreign equipment and advantages. The main electrical compone...

Same products

LOW BED SEMI TRAILER 卖方: Foshan Ultraton Engineering Machinery Co., Ltd Flatbed Semi Truck Trailer has a bottom plate (cargo platform) and can also be widely used to tra...
LEAF SPRING 卖方: Foshan Ultraton Engineering Machinery Co., Ltd Leaf spring is a very important part of a vehicle. Ultraton semi trailersprings, also called sem...
GENUINE FUWA TRAILER PARTS SERIES 卖方: Foshan Ultraton Engineering Machinery Co., Ltd FUWA It is a multinational group company integrating Research & Development, manufacturing an...
FLATBED SEMI TRAILER 卖方: Foshan Ultraton Engineering Machinery Co., Ltd Ultraton has flatbed truck trailer for sale. According to the structural characteristics, Contai...
CONTAINER TERMINAL SEMI TRAILER 卖方: Foshan Ultraton Engineering Machinery Co., Ltd The crossbeam is stamped into a groove shape using high-quality steel plates, and the front and r...