Industrial Molding Parts

Injection molded parts

Part size: 124*152*80mmPart material: ASACavity: 2 cavitiesMould weight: 875kg Mold size: 600*610*880mmMould type: plastic injection mouldFeature: medium size plastic part, hot bush, cold runner...

Custom Plastic Parts

Part size: 220*172*5mmPart material: ABS 20%GFCavity: 1 cavityMould weight: 542kg Mold size: 590*590*680mmMould type: plastic injection mouldFeature: medium size plastic part, hot tip, slider core...

Injection Mould Tooling

Part function: Plastic gear for industrial productsPart material: POM We are Injection Mould Tooling maker in China serveclients around the world. As a high quality custom injectionmold maker and...

Injection Molding Service

HanKing Mouldstrives to provide you with most reasonable cost plastic injection molding service while meeting all qualityrequirements of you at the same time.Common plastic injection mould steel...

Mold Making Procedure

Mold making procedure, first step is mould drawing design,the 2D & 3D mould design should be confirmed by customer.Customer send the plastic parts drawing.HanKing design tooling drawing according ...

Plastic Injection Mold Inc

POM gear mould, is only one of the similar products we made forEurope customer. The mould is 4 cavities, short cycle time, urgentT1 schedule, HanKing finished the first of trial in 4 weeks.lead time...

Custom Plastic Injection Molding

Part function: Plastic gear for industrial productsPart material: POM We are plastic mould manufacturer in China serveglobal clients. As a high quality custom injection moldmaker and plastic...

Industrial molding parts are referred to the plastic parts of industrial precision molded products, we preferred to think of it as non-consumer products.

Nowadays, the demand for consumer products is oversupplied, and the demand for industrial products is increasing. This is because many parts of the equipment in the past were made of metal. With the development of the plastics industry, more and more industrial product parts are trying plasticization. Metal parts have higher density, greater strength, and thermal and electrical conductivity. However, plastic industrial parts have advantages in mechanical shock absorption, thermal expansion, elongation at break, and toughness. And the properties of plastics can be greatly transformed by the addition of fillers, reinforcing materials and modified materials, engineering plastics perform better in this respect. Use plastic to produce parts that are not necessary for high strength can reduce the weight of equipment, simplify the structure and save costs, this is why industrial molding parts are becoming more and more common.

Industrial moldingparts range from small plastic gears to large industrial equipment plastic enclosures. The design of the mold is very complicated work, the plastic part structure, the different plastic resin, required life cycle, etc. many factors determine the mold construction.

Our designers must master the properties of different plastics and mould steel, and consider the temperature change, pressure change, steel abrasion during the production process, designed qualified industrial moulds.

If the mould structure is unreasonable, even the most excellent operator can not get good plastic parts. The design defects cannot be solved by the defects in the production process. Only when all the factors are considered in the design of the mould, the mould quality and stability of the mass production can be guaranteed.

Hanking mould technologyoffer precision molded products inc.

Other supplier products

	Prototype Mould	Soft Prototype Mold Prototype moldis a kind of test mould before mass production mould, customer make test mould for design verification, Product ...
	Industrial Molding Parts	We are one of theresponsible china injection molding suppliersand have experience in supplying custom plastic injection mouldingservice for many ye...
	Family Mould	What is the family mold? A mold that can only produce one product at a time is called a single-cavity injection mold. If a mould is used to prod...
	Insert Molding	What is insert molding? Insert molding refers to a molding process in which an integrated product is made by inserting a pre-prepared metal mater...
	Double Shot Plastic Injection Mold Products	Details Of Double Shot Mold Part function: Jug Cap Part material: PP & POE Cavity: 2+2 cavities Cavity steel: ASSAB 8418 Life Cycle: 1,000,000 ...

供应产品

Same products

	帕劳灌装液氮罐KGSQ液氮瓶	卖方: 河南天之道生物科技有限公司	在生命科学研究中，液氮是较为常用的冷冻介质，储存它的容器则成了重要实验工具。实验进行中，为了样本的低温储存环境稳定，需要定期补液以保证充足供应，因为液氮易挥发，液氮量随时间推推移而减少。因此，为...
	古巴液氮供应罐KGSQ低温杜瓦瓶	卖方: Henan Tianzhidao Biological Technology Co., Ltd.	在生命科学研究中，液氮是较为常用的冷冻介质，储存它的容器则成了重要实验工具。实验进行中，为了样本的低温储存环境稳定，需要定期补液以保证充足供应，因为液氮易挥发，液氮量随时间推推移而减少。因此，为...
	多哥细胞冷冻容器KGSQ液氮野外罐	卖方: 河南天之道生物科技有限公司	液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用...
	布隆迪细胞储存液氮容器 KGSQ 冷冻杜瓦瓶	卖方: Henan Tianzhidao Biological Technology Co., Ltd.	液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用...
	乌克兰大口径液氮容器KGSQ氮气罐	卖方: 河南天之道生物科技有限公司	在生物样本中心或科研机构，有大量的细胞，菌种和疫苗等样本需要进行低温保存。这些样本科研意义重大，安全不可忽视，再加上有批量管理和数据收集需求。通常会选择气相液氮罐而不是航空铝制杜瓦。 气相液氮...