Backlit Membrane Switch
Many working environments and machines will be used in low light or dark conditions. So we will recommend illuminated membrane switchwith internal lighting for backlighting in film. Choose EL film as the light guide plate, fiber optics, and the newer light guide film (LGF) structure. Niceone-tech recommends LGF, which uses side LEDs and light guide panels to make the product have a lower loss and longer life relative to the EL membrane switch.
The thickness of the LGF membrane switch provided by Niceone-tech can even be 0.8mm.
The brightness of buttons and logos is not only uniform and long-lasting but more importantly, we can also make them illuminate each button individually.
Sometimes you can also use two-color or RGB three-color lights to enter one step makes the product more beautiful.
Three Other Types of Illuminating Membrane Switches Below
Electroluminescent (EL)
EL backlight is driven by high frequency and low power. EL is very thin, it is a substitute for traditional lighting technology, and is widely used in various electronic accessories. The life of EL backlight products mainly depends on the driving voltage, frequency, temperature and humidity. But most EL membrane switches can reach a life of 4000 hours or more. The brightness of the EL membrane switch (to change into Backlit Membrane Switch) will attenuate linearly from the initial power-on. This is also an unavoidable disadvantage relative to other backlight membrane switch panels.
The EL backlit membrane switch provided by Niceone-tech will not cause heat, electricity and EMI problems. Mainly EL is more often a "cold" lighting medium.
Fiber Optics
Fiber optic membrane switches are also a good choice for backlighting. The optical fiber material is very thin and can be used as a fixed layer of the membrane switch. At the same time, tactile feedback is better without adding a touch point. Life expectancy is up to 50,000 to 100,000 hours. The main light source is from LEDs
Through the optical fiber transmission in the membrane switch needs to light up. And can be larger than the surface-mounted LED backlight area. Click Fiber Optics membrane switch (to change into Backlit Membrane Switch) for more information.
LEDs
A common Light Emitting Diodes membrane switch (to change into Backlit Membrane Switch) with relatively low cost. Since LED backlighting techniques for membrane switch cannot meet the lighting of a large area, it is mostly used for indication purposes. It is a relatively old technology. But the service life is long and deep customers love it.
Applications of Backlit Membrane Switches
Niceone-tech's custom-designed membrane switches and membrane switch keypads. Membrane switches are used in many industries. Niceone-tech summarizes several best membrane switch industries:
Medical Equipment and laboratories are the major markets. Niceone-tech provides customized membrane switches with complex requirements for many European and American manufacturers. In the medical environment, based on the standard membrane keypad, the materials sometimes have antibacterial effects and easy cleaning characteristics. At the same time Niceone-tech applies backlit and glue technology to the membrane switch. It can even be produced using digital printing.
Industrial Controls: Because industrial equipment is more demanding moisture resistance and UV resistance, so the product's waterproof requirements and UV resistance performance requirements are relatively high. The choice of materials can refer to the membrane switch design guide (to change into go This page), I believe that the materials compiled by Niceone-tech can help you.
Health & Fitness Equipment: Because it is often corroded by sweat, salt and moisture, the material must be resistant to corrosion. Membrane switches are often used in treadmills. Using membrane switches to optimize performance and control is very important for fitness personnel
What industry are you in?
Contact Niceone-tech today, or visit our Product Gallery for high-performance inventory and customized membrane switches for your unique applications. If you have any questions, please contact
Normal Structure of Backlit Membrane Switch:
Graphic overlays digitally and/or screen printed on the backside. The effect can be customized according to your requirements including glass, metal, wood, and stone. If the panel is in a more severe environment, we can even use hardened glass and stainless steel as the panel material. It is very important to choose Overlay printing according to requirements.
The window needs raw materials to be transparent, frosted, transparent, or colored. The window of the membrane switch is different, and the choice of materials is also very different. When the window is large, and it is required to clearly see the bottom LCD or touch screen. EBG series is a good choice, the material is scratch resistant. If it is just a panel, then PC or Lexan overlay is also feasible
Selective textures and UV hard-coat surface finishes
Tactile or nontactile, snap dome, or nonsnap dome.
Pillow rim-embossed membrane switch panels
Optically clear adhesive (OCA),Liquid Optically Clear Adhesive,Air Gap(to change into Optical Bonding in Membrane Switches and User Interfaces)
EMI/RFI shielding
Rigid support backers such as aluminum and FR4 with PEM mounting fasteners
Standard connectors such as CJT, Nicomatic and Molex, etc
Niceone-tech is a professional membrane switch manufacturer. We provide Membrane Keypad, Membrane Switch Panel, human machine interface control module. membrane switch backlighting, led membrane switch, membrane keypad paneland so on. Want to know more? Please contact us.
在线联系供应商
Other supplier products
Graphic Overlays | The structure of the graphic panel overlays or control panel/keypad overlay is very simple. It is a single-layer structure of polycarbonate or poly... | |
Custom Membrane Switches Keypads | Easy operation: Our custom membrane keyboard is regarded as a user interface or human-machine interface, facilitating the input of communications a... | |
Waterproof Membrane Switch | Waterproof Membrane Switch Common waterproof flexible membrane switcheshave good water resistance, and are also very good in related oil, dust, an... | |
FPC Membrane Switch | Flexible & rigid membrane switch assemblies (FPC membrane switch, silver flex membrane switches, and PCB membrane switch). Niceone-tech custom ... | |
MEMBRANE SWITCHES | Membrane switches are simply a part of electronic equipment, and are often regarded as user interfaces or human-machine interfaces, making it easie... |
Same products
巴拿马-液氮样本存储罐-五轮推车 | 卖方: 河南天之道生物科技有限公司 | 在生物研究领域,液氮容器是不可或缺的设备之一。细胞储存液氮罐专为满足各类实验室的专业需求而设计,采用优质航空铝材料精制而成,具有轻便、耐用、高效的特点。它不仅能够为您的实验样品提供长期稳定的保存... | |
不丹-细胞储存液氮罐-液氮罐推车 | 卖方: 河南天驰仪器设备有限公司 | 在生物研究领域,液氮容器是不可或缺的设备之一。细胞储存液氮罐专为满足各类实验室的专业需求而设计,采用优质航空铝材料精制而成,具有轻便、耐用、高效的特点。它不仅能够为您的实验样品提供长期稳定的保存... | |
比利时-液氮罐细胞储存-液氮推车 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 在生物研究领域,液氮容器是不可或缺的设备之一。细胞储存液氮罐专为满足各类实验室的专业需求而设计,采用优质航空铝材料精制而成,具有轻便、耐用、高效的特点。它不仅能够为您的实验样品提供长期稳定的保存... | |
南非-液氮细胞储存-液氮报警器 | 卖方: 河南天之道生物科技有限公司 | 在科学研究领域,保持样本的原始状态十分重要。专为满足这一需求而设计的细胞储存液氮罐,采用航空铝合金材料精心打造,它不仅具备了超低的液氮挥发率、轻巧便携的特点,更以较小的空间占用实现了大容量样本的... | |
阿曼-实验室用液氮罐-液氮罐报警器 | 卖方: 河南天驰仪器设备有限公司 | 在科学研究领域,保持样本的原始状态十分重要。专为满足这一需求而设计的细胞储存液氮罐,采用航空铝合金材料精心打造,它不仅具备了超低的液氮挥发率、轻巧便携的特点,更以较小的空间占用实现了大容量样本的... |