ZNC Die Sinking EDM Machine

ZNC EDMSinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting is also manual. Ideal for molds and spare parts manufacturing industries, ZNC edm spark erosion machinefor sale by DMNC is your best choice for die sinking operation!

ZNC350 ZNC Spark Erosion Machine

ZNC430 ZNC Electrical Discharge Machine

ZNC450 Electrical Discharge Machining Machine

ZNC540 Electric Discharge Machining

ZNC600 ZNC spark edm machine

ZNC860 ZNC Die Sinking EDM With Heavy Load Capacity

ZNC Die Sinking EDM Spark Erosion Machine Highlights

Original Taiwan C-Tek controller, LCD monitor, Industrial Computer Controller EDM sinker for sale

High accuracy X, Y, Z three axes C3 grade Taiwan-made ball screw.

Z-axis imported Japanese Sanyo servo motor control.

Three axes DROs of 0.005mm resolution.

Resin sand casting as machine body and inner stress removed to make sure long-time rigidity and stability.

Z-axis is equipped with a high precision roller guideway with a Japanese SANYO DC servo motor, to make the movement of the Z-axis more sensitive and smoother.

The znc machinehas a wide machine base to make sure the machine is strong enough for heavy loading, X. and Y axis have V shape and flat guideway with FEFLON wear-resisting sticker, movement of heavy load is smooth and light, with no crawling phenomenon.

Working lamps, fire extinguishers, and lubrication units, and patented electrode holders are all Taiwan-made.

ZNC Die Sinking EDM Spark Erosion Machine Function Characteristic Introduction of Control System

More than 20,000 units of programming storage capacity. Normally, more than 20,000 different programmings of mold or customer numbering can be stored

With a mirror surface processing circuit, a true mirror effect can be performed. Furthermore, it is even better to use orbital processing and powder mixing processing with the EDM spark erosion machine.

10 segments auto-editing function. ① Manual edit: edit machining condition by experience. ②AUTO Z auto edit: Max. Depths, initial current and finished process, machining area selection are provided, and then machining condition edit can be finished automatically. ③ Intelligent condition edit electrode shape, electrode and workpiece material, workpiece section area and finished precision selection, depth setting area are provided, and then machining condition can be complete at a time by the way of a rough→moderate→fine.

X, Y, Z-axis coordinate are switch with Metric and English system

If machining of the EDM CNC die sinking process is unstable, the discharging condition is auto-adjusted by modifying discharging efficiency and working time. After that, the condition will restore automatically. And it is also adjustable at any time.

Auto arcing detecting function, if unsteady caused by arcing occurs, the computer will adjust machining parameters and rise to jump up height, then the normal condition would return.

If could set that after 2~10 times discharging (jumping up control), the electrode will be raised (safe height Z) to the set arbitrary position and continue machining the EDM spark erosion process. This could achieve good slagging off performance for deep hole machining.

The function of avoiding second discharging and carbon deposition rapid raising or discharging boundary searching rapid rising.

Power control (equal energy) function for homogenizing machining effect. And this function could be switched off to accelerating graphite electrode machining.

Generator new design conforms to a power supply box and 15-inch LCD display criterion of European CE safety regulation, which is dustproof, waterproof, electric noise-proof, and circuit board life could also be raised.

An industrial class PC-based controller is applied, and the traditional hard disk is substituted by new DOM type memory, which enables faster and more steadily speeds of file reading and it is more suitable for industry application.

Up discharging (reverse machining) function makes special machining easier.

Two independent machining coordinates. The male die and female die could be parted or machined in different coordinates.

After power off, the system restarts and automatically reloads the previous machining condition and coordinate of last time, so discharging could be finished by pushing the remote control box without panel operation

Two jumps up to speed type, which serve speed could be raised when no electrode deformation and big area machining efficiency could also be raised.

Separately storage of coordinate and machining data and same machining condition could be rapidly added in different part machining.

Two high voltage circuits could be set in partial voltage or partial current according to the customer's need provided by die sinking machinesuppliers

Arcing detection setting function could start the carbon deposition hardware detecting circuit, and every charging pulse could be detected and the current will be cut off when an abnormal pulse occurs. So no short circuit is caused by a short circuit

Discharging high voltage pulse control, which enables the settings of different high voltage pulse types and it could go with machining speed and electrode wear.

ZNC EDM Spark Erosion Machine Die Sinking Operation & Process

The EDM spark erosion machine die-sinking process is usually used in the production of molds and dies. A discharge occurs in the small gap between the workpiece and the electrode, and the material is removed by melting or vaporization. For the EDM spark erosion machine die-sinking process, the electrode and the workpiece must be immersed in the dielectric fluid. The die-sinking mold process starts with processing the graphite electrode to form the "positive" of the required cavity. The electrode is then carefully inserted into the workpiece, and when the feature closes the spark gap (the distance required for the spark), a spark is generated on its surface.

Now the znc edm machine priceif affordable and if ou want to buy our edm die sinker product,please contact us.

Other supplier products

	EDM Parts	CNC EDM Machine Applied in Industries Mold & Die Automotive Aerospace and Defense Medical Electronics Home Appliances BIEM is a edm sp...
	EDM Machine Parts	CNC Die Sinking/Sinker EDM Machine, also known as CNC die-sinking EDM electricdischarge machine and CNC Spark Erosion Machine provided by one of th...
	A45 CNC Die Sinking EDM Machine With Solid Carbide Circuits	A45 CNC spark erosion machine has three-axis simultaneous control and 5th generation electrical discharging control system, best surface finish Ra&...
	Double Heads Large CNC EDM Machine	Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do mac...
	DK7732 CNC EDM Wire Cutting Machine With X×Y=320×400mm	DK7732CNC EDM Wire Cutting Machine With X×Y=320×400mm Features of High-speed HF Power Φ0.18mm, the diameter will be &Ph...

供应产品

Same products

	多哥细胞冷冻容器KGSQ液氮野外罐	卖方: 河南天之道生物科技有限公司	液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用...
	布隆迪细胞储存液氮容器 KGSQ 冷冻杜瓦瓶	卖方: Henan Tianzhidao Biological Technology Co., Ltd.	液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用...
	乌克兰大口径液氮容器KGSQ氮气罐	卖方: 河南天之道生物科技有限公司	在生物样本中心或科研机构，有大量的细胞，菌种和疫苗等样本需要进行低温保存。这些样本科研意义重大，安全不可忽视，再加上有批量管理和数据收集需求。通常会选择气相液氮罐而不是航空铝制杜瓦。 气相液氮...
	柬埔寨气相液氮罐KGSQ液氮容器	卖方: Henan Tianzhidao Biological Technology Co., Ltd.	在生物样本中心或科研机构，有大量的细胞，菌种和疫苗等样本需要进行低温保存。这些样本科研意义重大，安全不可忽视，再加上有批量管理和数据收集需求。通常会选择气相液氮罐而不是航空铝制杜瓦。 气相液氮...
	Electroplated Tools	卖方: Henan E-Grind Abrasives Co., Ltd.	Henan E-Grind Abrasives Co., Ltd. produces electroplated tools by plating diamond or CBN grains w...