LOCK FORMER
Thelockformer machine, also known as the seam forming machine, the edge side processing machine, the air duct lock forming machine, is a multifunction machine, mainly used for the duct lock processing of plate connection and round duct closed connection. It is very common in industrial development. For the production of many kind of materials, such as pipe material, the appearance of lock forming machine is undoubted a good news, which can meet the various shapes of lock manufactured of duct. The thickness of the processed sheet is 0.4-1.2 mm. All the gears, shafts and rolls of the machine are made of high-quality steel.
After strict heat treatment process, the machine is durable and of stable quality. It is easy to install, and also has beautiful appearance and reasonable mechanical principle with flexible in movement, convenient in operation and so on. It can meet different requirements of users. The lock forming machine is suitable for the production of air ducts for air-conditioning ventilation, fire-fighting and smoke-free, dust-free purification, etc. According to requirements, it can be made into various round and rectangular thin-plate ducts, which are various sheet metal processing, duct production, etc. Indispensable mechanized equipment.
The feature of usage of lock forming machine
- Before use, the debugging of the feeding guide rail should be strictly in accordance with the debugging requirements of the equipment, and the feeding guide rail should be adjusted to the specified position size and then be fixed. Before use, the debugging of the feeding guide rail should be strictly in accordance with the debugging requirements of the equipment, and the feeding guide rail should be adjusted to the specified position size and then be fixed. If the actual position of the feeding guide is smaller than the set position, the lock is not formed; if it is larger than the specified position size, because the feeding sheet is too wide and the size of the lock is too bad, the two lock of plates cannot be connected or the material will be wasted; if the feeding guide rail is inclined, it is prone to defects such as uneven front and back width and deviation.
Comifo is a professional ducting machine supplier, we provide auto line duct machine, flange forming machineand etc. Comifo does everything to make you be assured of our most honored service.
在线联系供应商
Other supplier products
 |
FHR-1600 Spiral Tube Forming Machine | Model No.: FHR-1600 Diameter Range: 100-1600mm Length of the Tube: 100-8000mm Thickness Range: 0.4-1.2mm(18-30ga) Speed: 0-40m/min(0-32FPM) Coil Wi... |
 |
TDF Flange Forming Machine | TDF Flange Forming Machine Model No.: T-12-34,T-15-34Thickness Range: 0.5-1.2(18-25ga),1.0-1.5(16-19ga)Speed: 8m/min(26FPM)Roller stations: 15Min.O... |
 |
RF-12M Lock Former | RF-12M Lock Former Model No.: RF-12MDescription: Pittsburgh LockThickness Range Used: 0.5-1.2mm(18-25ga)Material: 50mmSize: 14.5mmMin.Order Quantit... |
 |
FHR-1600 Spiral Tube Forming Machine | Model No.: FHR-1600 Diameter Range: 100-1600mm Length of the Tube: 100-8000mm Thickness Range: 0.4-1.2mm(18-30ga) Speed: 0-40m/min(0-32FPM) Coil Wi... |
 |
RF-08D Standing S Cleat | Model No.: RF-08D Description: Standing S Thickness Range Used: 0.8mm(22ga) Material: 131mm Size: 28.58mm Supply Ability: 10 Sets per Month P... |
