Overview of Manifold
A manifold is a combination of multiple pipes. The manifold includes gate valves, pipelines, pipe fittings, pressure gauges, and electronic sensing, hydraulic control systems and other accessories. There are many types of manifolds that have different uses depending on the construction. Common manifolds include throttle manifolds, pressure manifolds, ring manifolds, kill manifolds, etc.
As a manifold supplierthat enjoys competiveness among other oil and gas equipment manufacturers,Saigao has its own manifold product series which consists of products such as choke manifold, cement manifold, filter manifold and frac manifold.
Oilfield ManifoldFor Sale
Oilfield Manifold For Sale
Choke ManifoldChoke Manifold control and implementation of oil and gas pressure control technology. In case that the BOP is off, the pressure at the bottom of well shall be kept higher than formation pressure thro...
Choke Manifold
Kill ManifoldOverviewThe killing manifold is an important part of the oil and gas well pressure control equipment. Its function is: when it can not pass the normal circulation of the drill string, the drilling flu...
Kill Manifold
Marine Standpipe ManifoldPurpose of marine standpipe manifold in the process ofblowout control and implementation of oil and gas pressurecontrol technology, it can be used to prevent blowout andprotect wellhead. To kill the w...
Marine Standpipe Manifold
Cement ManifoldCementing manifold is used to control the cement fluid from cementing pump and transform the cement fluid to wellhead and accomplish cementing operation finally.Valve use plugvalves which is in low op...
Cement Manifold
Frac ManifoldFracturing manifold is the product which connects the high pressure outlet of multiple sets of fracturing car with high pressure elbow and high pressure tee and then connects them to wellhead with one...
Frac Manifold
Sand Filter ManifoldSand filter manifold can be used to wipe off the sand and other particles in fluid. Mixtures enter from the top of manifold, ofwhich the solid sand fall into the bottom under the bafflecushion. Fluid ...
Sand Filter Manifold
Filter ManifoldThe filter manifold is used to filter and recover fracturing sand after completion of separate layer fracturing. Fracturing fluid through the filter is recycled while the coarse particles stay on the...
Filter Manifold
The Main Functions of the Manifold System
The Main Functions of the Manifold System
Provide an interface for production pipelines, submarine pipelines and oil wells;
Combine oil and gas for transport.
Distribute electricity and water pressure systems.
Support airfoil hubs, pipeline hubs and umbilical hubs.
Support and protect all piping and valve systems.
Provide a support point for the manifold module during the installation and recovery process; provide a support platform for the ROV during ROV operation.
The china manifoldand the well are completely independent in structure, and the oil well and the oil pipeline are connected to the manifold through the jumper. The management system consists of a manifold, a manifold support structure and an infrastructure. The manifold supports the junction between the structural manifold and the infrastructure.
The manifold consists of pipes, valves, control modules, flow meters, etc. On the chassis of the pipeline arrangement in the manifold, the oil and gas produced by the chassis well and the satellite well are collected by the manifold and piped to the platform. The injected water from the platform is distributed to each injection well through the manifold.
The manifold support structure consists of a frame made of pipe diameter and section steel. It functions to: provide guidance for drilling; provide a base for equipment installed under the underwater pipe; provide a carrier for underwater pipe sinking; protect the underwater pipe The exchange is not destroyed.
Most of the basic structure is in the form of a hydraulic anchor, and its structure is a large diameter steel structure.
We are one of the largest oilfield cementing toolsmanufacturers from China. SAIGAO GROUPproducts are mainly used in oil, gas, geothermal and water well field drilling.
在线联系供应商
Other supplier products
 |
Lifting Cap | Lifting capis a special tool for lifting the drilling tools in petroleum, natural gas, drilling engineering and geographical exploration. Technica... |
 |
Split Wellhead Christmas Tree for Oil/Gas | Wellhead and Christmas tree is used for well drilling and oil or gas production, water injection and downhole operation. wellhead and christmas tre... |
 |
LM-T Type Releasing Casing Spear | LM-T Releasing Spear is a fishing tool that can catch the drill pipe, tubing and casing from those tools' internal diameter. The releasing spear ca... |
 |
Cylindrical Plug Valve | The plug body of cylindric plug valve is in cylindrical shape, which makes up of a sealing pair with the tapered hole surface of valve body. Cylind... |
 |
LM-T Type Releasing Casing Spear | LM-T Releasing Spear is a fishing tool that can catch the drill pipe, tubing and casing from those tools' internal diameter. The releasing spear ca... |
Same products
 |
Intelligent Precision Glue Control System | 卖方: 855005 | Intelligent Precision Glue Control System The Golden Horse GM-4020 is an intelligent glue concen... |
 |
JM-5416D Automatic Rigid Box Making Machine | 卖方: 855005 | JM-5416D Automatic Rigid Box Making Machine The JM-5416Dintelligent visual fully automatic box m... |
 |
Positioning Machine JM-600B | 卖方: 855005 | Positioning Machine JM-600B The vision positioning machineis the core component for producing li... |
 |
Automatic Feida Gluing Machine JM-600A | 卖方: 855005 | Automatic Feida Gluing Machine JM-600A Automatic Gluing Machineis used for gluing the cover pape... |
 |
Automatic Grooving Machine JM-1200 | 卖方: 855005 | Automatic Grooving Machine JM-1200 The JM-1200 Automatic Cross Grooving Machineis capable of bid... |
