General Purpose CNC EDM Wire Cut Machine F Structure

General Purpose CNC EDM Wire Cut Machine F Structure

DK77 series high speed wire cut EDM has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with good rigidity to make sure good performance of cutting accuracy. Multiple cuts capacity is standard for better surface finish requirement.

General Purpose CNC EDM Wire Cut Machine F Structure Highlights:

High-speed HF power system with stable cutting speed around 170mm2/min, Max. speed around 300mm2/min, single-phase power supply, power consumption less than 1kw, it is a type of fast cut CNC EDM machine. And DMNC has premium fast cut cnc wire cutting machinefor you.

The machine body has been upgraded with more reinforcing ribs inside of machine bed and carriage, new designed DK77 series has a heavier machine body and better geometric accuracy.

Z axis motorized control is standard.

X and Y axis with a linear scale and digital readout.

The mechanical wire tension unit is standard.

Taiwan HIWIN linear guideway for X, Y axis, linear guideway for wire drum motion.

More accurate ball screw.

Automatic lubrication is standard.

Remote control standard EDM machine working.

±6°/80mm taper system is standard.

Sheet metal door of the working table.

Multiple cuts capacity, best surface finish ≤1.2μms.

AC servo motor control for X and Y axis available as optional.

Recycling tank with a high-pressure pump and paper filter.

General Purpose CNC EDM Wire Cut Machine F Structure Function Configuration of Controller

AutoCUT provides a complete integrated solution for the machining of CNC EDM wire erosion machines for sale. The system includes CNC EDM auto wire cutting software/AutoCUT control software runs at the platform of Windows, PCI based drive card installed on the motherboard, high stable main board of stepper motor drive or servo motor drive, and 0.5 microseconds medium speed wire cut EDM HF power board. AutoCUT software has a plug that can be installed in AutoCAD to design cutting paths and generate cutting programming directly in AutoCAD, the design makes programming more convenient and easier to learn.

AutoCUT's Main Features

It supports graphics-driven automatic programming, customers do not need to touch the code, just the graphics settings cutting technology can be cut, at the same time, it supports by other wire cutting EDM software created by the list of 3B or G code, and only need to read and the process can be cut.

The software is embedded in AutoCAD, CAXA and some other software, and the customer only needs to know AutoCAD or other design software, is easy to use and does not require special drawing training.

Several machining modes are combined for cutting (continuous, single, forward, backward, back, etc.).

The XYUV four-axis direction is adjustable, the drive motor can be set to 5-phase 10 beats or 3-phase 5 beats, and so on.

Real-time monitoring of X, Y, U.V. and cutting.

Machining preview, real-time display of the cutting process; taper processing 3D display and tracking, zoom in and out to view graphics, front view, right view, top view, etc.

The ability to cut multiple times, as well as the customer-maintained database of cutting parameters, make multiple cuts easier and more reliable.

Belt cutting using four-axis synchronization technology, can be processed up and down different shapes of cutting convenience.

The control plate drives the four-axis motion, the work is stable and reliable.

Support sandal-on-the-card work, several electric spark wire cutters can only be controlled by one computer and cut at the same time.

With automatic alarm function, you can alarm in the event of cutting complete or failure, you can set the alarm time.

Support angle removal delay, track cutting delay, so as not to cause the impact of wire deviation.

Support screw pitch compensation to improve mechanical accuracy.

The linear scale and closed scale are supported by the servo motor to improve the positioning accuracy of the machine.

Support s3 different cutting methods: ordinary high-speed wire cutting EDM processing, medium-speed EDM wire cutting for sale coding output mode and output mode.

Power-off memory function, restore power after cutting off the data backup, in the event of a short circuit re-tracking and troubleshooting.

Automatic power off after processing is complete.

Key Functions of the AutoCUT System

The use of graphics-driven technology, reduce labor, improve work efficiency, reduce the error caused by workers.

Open to various versions of Windows XP, the software is easy to learn and use.

Directly embedded in AutoCAD, CAXA and other CAD software for a smooth combination of CAC/CAM to extend the cutting range.

Taper cutting, four-axis synchronization technology 3D design and cutting trajectory, compensation wire diameter, electrode wire diameter and large tap cutting.

Support multiple control cards to work at the same time. Many CNC wire cutting EDM machines can be controlled with just one computer, which has many AutoCUt PCI cards.

It has a database of cutting parameters, which the operator can edit, and the operator can save, edit, and read cutting parameters according to different materials, different thicknesses and required cutting properties.

AutoCUT optimizes the processing of ultra-thick workpieces (up to 1000mm) cutting, making the track stable and reliable.

Function Pic General Purpose CNC EDM Wire Cut Machine F Structure

Principle Of AutoCUT Wire Cutting EDM Machine

Consumable Parts General Purpose CNC EDM Wire Cut Machine F Structure

±30° Big Angle Cutting Sysem

BIEM is one of the key edm machine manufacturerin china, we provide cnc edm machine for sale, manual edm machine, auto cut software cnc edm, cnc high speed wire cut edm, wire cut edm software, dk7750, cnc electric discharge machineand etc. Want to know more? Please contact us.

Other supplier products

	Small Hole EDM Drilling Machine For Sale	Small Hole EDM Drilling Machine For Sale Our edm drilling machine for saleare designed for the highest levels of accuracy, incredible reliability ...
	CNC EDM MACHINE FOR SALE	DMNC Provides Complete Solution Of EDM Machining Technology With 30+ Years' Experience, Continuous Innovation, Strict Quality Control, and Swift Se...
	General Purpose CNC EDM Wire Cut Machine F Structure	auto cut software cnc edm cnc high speed wire cut edm wire cut edm software dk7750 cnc wire cutting machine DK7750series cnc high speed wire cut ...
	CNC EDM Hole Drilling Machine for Sale	CNC EDM drill, also known as small hole edm drilling machine, basically, there are three axis control(X, Y, Z), 4-axis control(X, Y, Z and W), 5-ax...
	High Speed CNC Milling Machine G-600	High Speed CNC Milling Machine G-600 As we know there is dust while milling graphite material, special designed cutting liquid curtain of the hi...

供应产品

Same products

	DM-16BF DM-18BF New cover Electric Sprayer	卖方: Zhejiang Huaqi Information Technology Co., LTD	The Electric Knapsack Sprayer is a game-changer in the field of agricultural pest control. Engine...
	Simple Round Breeding Cage	卖方: Zhejiang Huaqi Information Technology Co., LTD	The Simple Round Breeding Cage features a durable and lightweight construction, making it suitabl...
	叙利亚-细胞储存液氮容器-液氮液位报警器	卖方: 河南天之道生物科技有限公司	精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中，细胞储存液氮罐作为实验室不可缺少的一种设备，在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐，航空铝制造，重量轻、占用...
	意大利-液氮细胞储存罐-液氮罐液位报警器	卖方: 河南天驰仪器设备有限公司	精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中，细胞储存液氮罐作为实验室不可缺少的一种设备，在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐，航空铝制造，重量轻、占用...
	埃及-细胞储存液氮罐-液氮液位监测仪	卖方: Henan Tianzhidao Biological Technology Co., Ltd.	精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中，细胞储存液氮罐作为实验室不可缺少的一种设备，在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐，航空铝制造，重量轻、占用...