ZNC Die Sinking EDM Machine
ZNC Die Sinking EDM Machine
ZNC EDM Sinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting is also manual. Ideal for molds and spare parts manufacturing industries, ZNC die sinking EDM machine for sale by DMNC is your best choice for die sinking operation!
ZNC350 ZNC Spark Erosion Machine
ZNC430 ZNC Electrical Discharge Machine
ZNC450 Electrical Discharge Machining Machine
ZNC540 Electric Discharge Machining
ZNC600 ZNC EDM Sparking Machine
ZNC860 ZNC Die Sinking EDM With Heavy Load Capacity
ZNC Die Sinking EDM Spark Erosion Machine Highlights
Original Taiwan C-Tek controller, LCD monitor, Industrial Computer Controller EDM sinker for sale
High accuracy X, Y, Z three axes C3 grade Taiwan-made ball screw.
Z-axis imported Japanese Sanyo servo motor control.
Three axes DROs of 0.005mm resolution.
Resin sand casting as machine body and inner stress removed to make sure long-time rigidity and stability.
Z-axis is equipped with a high precision roller guideway with a Japanese SANYO DC servo motor, to make the movement of the Z-axis more sensitive and smoother.
The machine has a wide machine base to make sure the machine is strong enough for heavy loading, X. and Y axis have V shape and flat guideway with FEFLON wear-resisting sticker, movement of heavy load is smooth and light, with no crawling phenomenon.
Working lamps, fire extinguishers, and lubrication units, and patented electrode holders are all Taiwan-made.
ZNC Die Sinking EDM Spark Erosion Machine Function Characteristic Introduction of Control System
More than 20,000 units of programming storage capacity. Normally, more than 20,000 different programmings of mold or customer numbering can be stored
With a mirror surface processing circuit, a true mirror effect can be performed. Furthermore, it is even better to use orbital processing and powder mixing processing with the EDM spark erosion machine.
10 segments auto-editing function. ① Manual edit: edit machining condition by experience. ②AUTO Z auto edit: Max. Depths, initial current and finished process, machining area selection are provided, and then machining condition edit can be finished automatically. ③ Intelligent condition edit electrode shape, electrode and workpiece material, workpiece section area and finished precision selection, depth setting area are provided, and then machining condition can be complete at a time by the way of a rough→moderate→fine.
X, Y, Z-axis coordinate are switch with Metric and English system
If machining of the EDM CNC die sinking process is unstable, the discharging condition is auto-adjusted by modifying discharging efficiency and working time. After that, the condition will restore automatically. And it is also adjustable at any time.
Auto arcing detecting function, if unsteady caused by arcing occurs, the computer will adjust machining parameters and rise to jump up height, then the normal condition would return.
If could set that after 2~10 times discharging (jumping up control), the electrode will be raised (safe height Z) to the set arbitrary position and continue machining the EDM spark erosion process. This could achieve good slagging off performance for deep hole machining.
The function of avoiding second discharging and carbon deposition rapid raising or discharging boundary searching rapid rising.
Power control (equal energy) function for homogenizing machining effect. And this function could be switched off to accelerating graphite electrode machining.
Generator new design conforms to a power supply box and 15-inch LCD display criterion of European CE safety regulation, which is dustproof, waterproof, electric noise-proof, and circuit board life could also be raised.
An industrial class PC-based controller is applied, and the traditional hard disk is substituted by new DOM type memory, which enables faster and more steadily speeds of file reading and it is more suitable for industry application.
Up discharging (reverse machining) function makes special machining easier.
Two independent machining coordinates. The male die and female die could be parted or machined in different coordinates.
After power off, the system restarts and automatically reloads the previous machining condition and coordinate of last time, so discharging could be finished by pushing the remote control box without panel operation
Two jumps up to speed type, which serve speed could be raised when no electrode deformation and big area machining efficiency could also be raised.
Separately storage of coordinate and machining data and same machining condition could be rapidly added in different part machining.
Two high voltage circuits could be set in partial voltage or partial current according to the customer's need provided by EDM machine suppliers
Arcing detection setting function could start the carbon deposition hardware detecting circuit, and every charging pulse could be detected and the current will be cut off when an abnormal pulse occurs. So no short circuit is caused by a short circuit
Discharging high voltage pulse control, which enables the settings of different high voltage pulse types and it could go with machining speed and electrode wear.
ZNC EDM Spark Erosion Machine Die Sinking Operation & Process
The EDM spark erosion machine die-sinking process is usually used in the production of molds and dies. A discharge occurs in the small gap between the workpiece and the electrode, and the material is removed by melting or vaporization. For the EDM spark erosion machine die-sinking process, the electrode and the workpiece must be immersed in the dielectric fluid. The die-sinking mold process starts with processing the graphite electrode to form the "positive" of the required cavity. The electrode is then carefully inserted into the workpiece, and when the feature closes the spark gap (the distance required for the spark), a spark is generated on its surface.
BIEM is one of the keyedm machine manufacturer, we provide die sink edm machine, edm spark erosion machine, edm die sinker product, znc edm, znc machine, cnc edm spark erosion machine, spark cnc machine, spark edm machine, cnc edm die sinkerand etc. Want to know znc edm machine priceand die sinking operation? Please contact us.
在线联系供应商
Other supplier products
 |
High Speed CNC Milling Machine G-600 | As we know there is dust while milling graphite material, special designed cutting liquid curtain of the high speed cnc milling machinekeeps dust o... |
 |
A1880 Double Heads CNC RAM EDM Machine | A1880 twin heads CNC spark erosion machine has two separated controllers and two separated machine heads, three axis simultaneous control of each h... |
 |
CNC EDM Hole Drilling Machine for Sale | cnc edm drill high speed small hole drilling edm/ fast hole edm drilling/ edm fast hole drilling cnc edm drill machine/ cnc drilling edm small h... |
 |
CNC EDM MACHINE FOR SALE | DMNC Provides Complete Solution Of EDM Machining Technology With 30+ Years' Experience, Continuous Innovation, Strict Quality Control, and Swift Se... |
 |
Automation CNC EDM Machine | ADV series new generation CNC EDM spark erosion machineis designed for automation, there are many different flexible options. Equipped with a robo... |
Same products
 |
L12301 12 Inch Brushless Chain Saw | 卖方: Zhejiang Huaqi Information Technology Co., LTD | 额定电压：20V 电链锯线速度：7.6m/s 空载电流：6A 额定功率：1000W 锯片规格：12” 最大切割直径：250mm 刹车：有 () |
 |
南非-低温供应容器价格-实验室杜瓦瓶 KGSQ | 卖方: 河南天之道生物科技有限公司 | 随着科技的不断发展，低温储存技术越来越多的应用于生物医学、科研实验和工业等多个领域。其中，液氮供应罐以其比传统的液氮容器更加持久和稳定的低温条件，被广泛的应用于这些领域。 液氮供应罐主要用于储存... |
 |
圭亚那-低温供应容器-液氮细胞储存 | 卖方: 河南天驰仪器设备有限公司 | 随着科技的不断发展，低温储存技术越来越多的应用于生物医学、科研实验和工业等多个领域。其中，液氮供应罐以其比传统的液氮容器更加持久和稳定的低温条件，被广泛的应用于这些领域。 液氮供应罐主要用于储存... |
 |
阿鲁巴-液氮供应罐-液氮细胞储存系统 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 随着科技的不断发展，低温储存技术越来越多的应用于生物医学、科研实验和工业等多个领域。其中，液氮供应罐以其比传统的液氮容器更加持久和稳定的低温条件，被广泛的应用于这些领域。 液氮供应罐主要用于储存... |
 |
图瓦卢-低温箱液氮容器价格-低温储罐厂家 | 卖方: 河南天之道生物科技有限公司 | 液氮罐主要用于长期保存生物样本，其应用范围十分广泛，不仅在生物医学领域有着重要作用，还在工业、科研以及食品保存等领域发挥着不可替代的作用，受到越来越多用户的关... |
