TUNNEL TYPE SHOT BLASTING MACHINE

Tunnel type shot blasting machine is a non-standard shot blasting machine that is according to workpieces information to design. The tunnel type shot blasting machineis mainly used for surface treatment of large steel structures to achieve the removal of rust, old patent leather, and old putty, etc.

For large workpieces, it can use a double electric hoist to lift the workpieces through the shot blasting chamber, and the workpieces can be shot blasted. The tunnel type shot blasting machine adopts imported PLC control and has automatic/manual control mode, the whole hook through the type of shot blasting machine to achieve automatic fault detection.

Tunnel Type Shot Blasting MachineBasic Specification

Machine type	HTK 04/05	HTK 08/09	HTK 12/09	HTK 12/11	HTK 12/11Q
	300*600	500*1200	800*2000	1000*2500	1200*3000
Max height (mm)	4700	5900	6700	7200	7700
Max width (mm)	4200	5100	5900	6100	6300
Max length (kg)	5000	8500	8500	10500	10500
	4x 7.5		12x11	12x 11	12x 11
Total installed power(KW)	41	72	143	147	157
Exhausted air quantity (m3/h)	6000	12000	18000	22000	25000
Foundation pit	Yes	Yes	Yes	Yes	Yes

BLASTING CHAMBER:

Blast wheel layout 3-D dynamic simulation design, ensures optimal shot blasting angle and distance, treat the object items on all sides with high-quality surface appearance but without overlapped and dead zone.

Shot blasting chamber with ZGMn13 steel guard plate, long service life.

Six layers of protection curtain to prevent the shot balls spatter out during blast cleaning. The curtain layers are natural rubber material with leaf spring which can automatically reset, ensure the sealing of the machine.

High chrome wear-resistant cast iron grate guard plate which protects the screw conveyor and prevents big clump to get into the hopper damaging the bottom screw conveyor.

BUCKET ELEVATOR ADVANTAGES:

Bucket elevator is composed of cycloidal pin gear reducer, upper and lower roller, transmission belt, bucket, closed abrasive storage hopper and tensioner. The feed port of the bucket elevator is connected with the crosswise screw conveyor, and the discharge port is connected with the screw roller sieve of the separator. In order to ensure that the belt conveyor does not skid on the surface of the drum during the bucket elevator works, the roller surface is welded with steel plates into a cage shape.

SEPARATOR ADVANTAGES:

tunnel type shot blasting machine uses advanced BE full-curtain type separator which is composed of separator part, cylinder screen, screw, hopper, and Manual valve. This separator absorbs American technology and developed by our company which is the newest style separator of our company at present.

The separator's working principle: The used abrasive from the bucket elevator is delivered by the screw to the upper separation area. The screw separates it evenly in the separation area along with the separator, forms a pill sand flow curtain-like a waterfall. At the same time, the blower of dust collector separates the projectile, molding sand, metal oxide skin fragment, stave projectile and dust in the flowing curtain through convulsion

on separator gusty area and using gravity dry separation way which will flow in the bunker after the second filtration by the bottom strainer and store up for the next circulation. The best separation effect of separator depends on the adjustment of the flow control board position of dry separation area, the adjustment of adjustment board position on filtering panel, adjusting the reed valve wind amount of air hose to realize. It can get good separation effect if the adjustment is reasonable which can keep the separation efficiency above 99.5%.

As one of shot peening machine suppliers, we will do our best to meet all the needs of customers.

Other supplier products

	AIR BLAST ROOM	Air blasting room or Air blasting cabinet with pneumatic media reclaim system – An economical alternative, vacuum reclaim systems utilize cy...
	RETRACTABLE SPRAY BOOTH	QINGGONG MACHINERYoffers a complete line of portable retractable spray booths for applications that require short finishing runs. Retractable sp...
	types of shot blasting machine	When sand blasting cabin factoryspace is at a premium or a temporary site is to be utilized our blastcontainersprovide an instant and economical so...
	FLOOR SHOT BLASTER	Floor shot blasteris a kind of shot blasting machine for concrete floors, steel plates. The floor shot blaster can clean up the floatation and imp...
	CONTINUOUS TUMBLE PASS-THRU SHOT BLAST MACHINE	CONTINUOUS TUMBLE PASS-THRU SHOT BLAST MACHINE The through-feed blast cleaning process offers a number of distinct advantages and ensures efficien...

供应产品

Same products

	150TPD Wheat Flour Mill Plant	卖方: solve these problems	150TPD Wheat Flour Mill Plant CAPACITY: PROCESSING 150TONS WHEAT PER 24HOURS Struct...
	300-500TPD Wheat Flour Mill Plant	卖方: solve these problems	300-500TPD Wheat Flour Mill Plant CAPACITY: PROCESSING 300T-500TWHEAT PER 24HOURS Struc...
	42TPD Wheat Flour Mill Plant	卖方: solve these problems	42TPD Wheat Flour Mill Plant CAPACITY: PROCESSING 42TONS WHEAT PER 24HOURS Structure: ...
	ETHIOPIA 62TPD Steel Frame Wheat Flour Mill Plant	卖方: solve these problems	ETHIOPIA 62TPD Steel Frame Wheat Flour Mill Plant 62TPD Wheat Flour Mill Plant CAPACITY: PR...
	maize flour processing plant	卖方: solve these problems	maize flour processing plant A is an industrial system used to convert raw maize into finished...