ZM-R7220A Infrared Soldering Station
ZM-R7220A infrared SMD rework stationis an intelligent infrared soldering station with real-time temperature monitoring, optical alignment system, rapid heating, and cooling. As an ir soldering station manufacturer, Zhuomao promises to provide high-quality infrared zm r6200 bga machines. Significantly, Zhuomao's infrared soldering station price is reasonable. Plus, Seamark ZMR7220Air rework station is also called zm r6200cin the past.
Functions of R7220A Infrared Soldering Station (ZM R6200)
01 Real-time Temperature Monitoring
Real-time temperature display, with automatic curve analysis function.
02 Optical Alignment System
High-definition CCD (2m pixels) digital imaging, automatic optical zoom system, manual control and laser red-dot alignment.
03 Rapid heating and cooling
The IR preheating zone is heated by a medium wave ceramic infrared heating plate, a multi-functional movable PCB fixing bracket, and a BGA bottom support frame. Laminar integrated cooling fan.
As one of the top infrared soldering station suppliers in China, Seamark ZM is famous for its rich technical force, complete detection means, reliable product quality, and full service. If you want to know the BGA repair machine and to get a perfect infrared soldering station price for your factory, please contact Seamark ZM first.
Specification Of R7220A Infrared BGARework Station (Zhuo Mao ZMR6200C)
Power Supply |
AC220V±10% 50/60HZ |
Power |
|
PCB Size |
412*370mm(Max);6*6mm(Min) |
BGA Chip Size |
60*60mm(Max);2*2mm(Min) |
IR Heater Size |
285*375mm |
Temperature Sensor |
1 pcs |
Operation Method |
7" HD touchscreen |
Control System |
Autonomous heating control system V2(software copyright) |
Display System |
15" SD industrial display (720P front screen) |
Alignment System |
2 Million Pixel SD digital imaging system, automatic optical zoom with laser red-dot indicator |
Vacuum Adsorption |
Automatic |
Alignment Accuracy |
±0.02mm |
Temperature Control |
K-type thermocouple closed-loop control with accuracy up to ±3℃ |
Feeding Device |
No |
Positioning |
V-groove with universal fixture |
Dimensions |
L685*W633*H850mm |
Weight |
76KG |
Difference Between A Hot Air Rework Station And An IR Infrared BGA Rework Station
The main difference between a hot air rework station and an IR BGA Rework Station is the way they heat the board. A hot air rework station uses heated air to transfer heat from the tool-to-board interface and into the solder balls, whereas an IR BGA Rework Station uses infrared light to heat up just enough of each ball so that it melts.
The next important difference is how they control temperature: Hot Air rework stations use PID temperature control, but IR BGA Rework Stations use proportional pressure modulation (PPM). PPM is more precise than PID because it can monitor changes in pressure within milliseconds. This means that when applying flux to a board or when reflowing solder balls on a board, you can rapidly respond by adjusting your PPM settings as necessary. With PID, this would take about 20 seconds per change due to slow response times in most systems.
Another key difference lies in airflow control systems; hot air has no need for specialized airflow since there's no need for cooling during reflow since all of that happens outside of the oven chamber using an external fan which blows across all areas equally regardless if they are close or far away from each other.
Now the price of china inline x ray machineis reasonable, if you have needs to buy bga x ray machine, please contact us.
在线联系供应商
Other supplier products
X-Ray SMD Component Counting Equipment | Microfocus x ray smd component counteris widely used in LED/automobile/aerospace/EMS etc field and become a necessity for modern PCBA inspection. ... | |
Offline X-Ray Inspection Machine | Seamark's 2D industrial x ray machine adopts a closed microfocus X-ray tube with voltage 90KV, 110KV, and 130KV, which meet different product inspe... | |
Microfocus X-Ray Inspection Machine | Microfocus X-ray inspection is widely used in the LED/automobile/aerospace/EMS ETC field and become a necessity for modern PCBA inspection. As a pr... | |
Offline X-Ray Inspection Machine | Seamark's 2D industrial x ray inspection equipmentadopts a closed microfocus X-ray tube with voltage 90KV, 110KV,130KV, which meet different produc... | |
Battery X-ray Inspection Machine | Seamark, a well-known national high-tech enterprise, was established in 2005 and has been working in the industrial x ray battery inspectionindustr... |
Same products
DM-16BF DM-18BF New cover Electric Sprayer | 卖方: Zhejiang Huaqi Information Technology Co., LTD | The Electric Knapsack Sprayer is a game-changer in the field of agricultural pest control. Engine... | |
Simple Round Breeding Cage | 卖方: Zhejiang Huaqi Information Technology Co., LTD | The Simple Round Breeding Cage features a durable and lightweight construction, making it suitabl... | |
叙利亚-细胞储存液氮容器-液氮液位报警器 | 卖方: 河南天之道生物科技有限公司 | 精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中,细胞储存液氮罐作为实验室不可缺少的一种设备,在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐,航空铝制造,重量轻、占用... | |
意大利-液氮细胞储存罐-液氮罐液位报警器 | 卖方: 河南天驰仪器设备有限公司 | 精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中,细胞储存液氮罐作为实验室不可缺少的一种设备,在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐,航空铝制造,重量轻、占用... | |
埃及-细胞储存液氮罐-液氮液位监测仪 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中,细胞储存液氮罐作为实验室不可缺少的一种设备,在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐,航空铝制造,重量轻、占用... |