.

Vertical Machining Center

Vertical milling centershows its superiority in mold processing. It is the preferred CNC machine tool for small and medium-sized mold parts processing industry. You can do milling, boring, drilling, expanding, reaming, tapping, and other processes in one set-up. A wide range of VMC is for your selection.

Features of machining center for sale

VMC Series Vertical cnc vertical milling centeris a new generation of CNC machine tools supplied by our company.

The X, Y, and Z axes can be equipped with a unique linear rolling guide or hardened plastic-bonded guideway.

VMC Series machines use an automatic tool exchange system (ATC), automatic lubrication system, cooling system, automatic chip removal device, manual spray gun, and portable operation device (MPG). All machines are fully protected with a modern cover.

It is not only suitable for the processing of plates, shells, and precision parts,but also suitable for the processing of different kinds of molds.

Once the job is loaded on the table, it can do different processing, such as milling, boring, drilling, expanding, reaming, tapping, etc.

The advantages of the machines are high automation, high reliability, easy to operate. The modern design is highly favored by customers all over the world.

The CNC rotary table can also be installed on the machine tool, the table can be indexed by the system.

Working Principle of Vertical Machining Center

The working principle of the Vertical machining center workingis to automatically process the parts processing program by manual processing procedures according to the part drawings, and convert the various machine tools and all the process parameters required by the parts into acceptable information codes. To the CNC device of the machine tool. These codes are stored on an information carrier (punched tape, disk, etc.), which is sent to the input device. Read the information and send it to the numerical control device, or use the computer to directly communicate with the machining center to realize the input and output of the part program.

Advantages of Vertical Machining Center

All castings are built with high tensile Meehanlte FC-30 high alloy cast irons, which provide outstanding wear-resistance.

The slideway of the cnc machine tool is equipped with a turn cite-b wear-resistant plate, precision spading, and forced lubrication to improve precision life. Three-axis square slide structure, and after heat treatment hardening, precision grinding.

The z-axis is equipped with counterweight balance, and the head rapid feed action and micro feed are very smooth.

A fully protected guideway makes sure the chips and coolant do not go into the guideway, extending the machine life.

MIS Data Collecting system.

Sealion Machine Tool is ahorizontal lathe manufacturer,we provide horizontal boring machine, china cnc lathe services, vertical milling center machine, china machine toolsand etc. Want to knowmore?Please contact us.



在线联系供应商

至: Xilong (Shanghai) Machine Tool Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

2-Axis CNC Single Column Vertical Lathe
2-Axis CNC Single Column Vertical Lathe Sealion Machine Tool is a machine tools companythat specialized in the lathe in both vertical and horizontal, floor type horizontal boring machine,...
Engine CNC Machine Tools, Engine Lathe & Grinding Machine
Engine CNC Machine Tools, Engine Lathe & Grinding Machine Sealion is one of the CNC china machine tool manufacturerswho can always help you. Sealion may not only offer you a wide selection of quality CNCma...
Lathe
Lathe Lathe machine introduction: Sealion Machine Tool supplies both vertical and horizontal lathe. We keep a high-level quality standard of our lathe ma...
CNC Horizontal Boring Mill
CNC Horizontal Boring Mill SEALION supplies Horizontal Boring Mill for sale both 110mm and 130mm spindle, with or without the back column. Great cost performance is the main ...
Gantry Machining Center
Gantry Machining Center SEALION supplies gantry type vertical machining center both tables moving type or gantry moving type. Gantry cnc machine center is widely used in t...
供应产品

Same products

8/12 行播种机,带仿形组件
8/12 行播种机,带仿形组件 卖方: 湖北永祥农机装备有限公司 永祥12行播种机非常适合播撒所有常见类型的小种子、种子混合物和肥料。支持根据农田条件定制您的需求。 永祥提供组合式300L气动播种机、雷达传感器、土地滚筒和仿形四连杆机构。为了保持工作深度的稳...
12行小麦大豆旱地播种机
12行小麦大豆旱地播种机 卖方: 湖北永祥农机装备有限公司 永祥 12 行播种机非常适合播撒所有常见类型的小种子、种子混合物和肥料。它有一个大种子箱,可以一次性增加您的播种面积并提高您的工作效率。支持根据农田条件定制您的需求。 对于大多数农民来说,在耕...
8/12 行小麦播种机,用于农业种子种植
8/12 行小麦播种机,用于农业种子种植 卖方: 湖北永祥农机装备有限公司 永祥 8/12 行播种机非常适合播撒所有常见类型的小种子、种子混合物和肥料。支持根据农田条件定制您的需求。 永祥提供组合式 100L 气动播种机,配有雷达传感器、7 级深度调节圆盘开沟机和农田...
8 行草坪播种机,用于播种草籽
8 行草坪播种机,用于播种草籽 卖方: 湖北永祥农机装备有限公司 永祥 8 行播种机非常适合播撒草籽、肥料或其他只需撒播或条播的种子。支持根据农田和拖拉机条件定制您的需求。 永祥提供带有雷达传感器和撒播或条播设备的 150L 组合式气动播种机。这使农民能够利...
8/12 行水稻直接播种机,适用于久保田洋马雷沃水稻插秧机
8/12 行水稻直接播种机,适用于久保田洋马雷沃水稻插秧机 卖方: 湖北永祥农机装备有限公司 省时省力。水稻直播就是直接播种,就像小麦一样,省去了育苗、移栽的过程,也不需要占用稻田育苗。 水稻直播没有返青和伤苗的过程,因此生长期比同期移栽水稻要短。水稻直播简单方便,有利于规模化发展。 ...