Walk in Stability Chamber in Pharmaceutical
Walk in Stability Chamberin Pharmaceutical
Model: YWER-41000
Product Performance
Temperature range: 20℃～80℃
Humidity range: 50-75%RH
Description of Walk in Stability Chamberin Pharmaceutical
Walk in drug stability test chamberis used to test the law of changes in raw materials or pharmaceutical preparations over time under the influence of specific temperature and humidity, to provide scientific basis for the production, packaging, storage, and transportation conditions of drugs, and to establish the validity period of drugs through experiments.
Drug stability tests include influencing factor tests, accelerated tests and long-term tests.
- ：High temperature test (not exceeding 60C) and high humidity test (usually not exceeding 75%)
- ：The samples are divided into three batches, which are observed for 6 months in the environment of 40℃±2℃/75%RH±5%RH and 25℃±2℃/60%RH±5%RH respectively, at 30℃ ±2℃/65%RH±5%RH Observe for 12 months in an environment .
Effects of Low Humidity
Static buildup is a major effect of relative humidity levels dropping below 45 percent. The accumulation of static charges can dry out medications, affecting the intended behavior of any solvents used in production. The excess static can also cause products to dry out and crumble, or stick together, leading to problems during tablet pressing and packaging.
Effects of High Humidity
High humidity causes products to absorb the excess moisture in the air, which can be just as destructive as environments with low humidity. Too much humidity can compromise potency and effectiveness, leading to degradation or even toxicity in some products. The potential for danger comes when relative humidity levels reach 60 percent or more; giving viruses, bacteria, mold, fungi and mites the opportunity to grow.
If you want to know more kinds of test chamber, please contact us.
As an environmental test chamber manufacturer, we will do our best to meet all the needs of customers.
在线联系供应商
Other supplier products
 |
What Will Happen if the High Low Temperature Test Chamber Fails to Meet the Sealing Requirement? What's the Solution? | All high low temperature chambers need to undergo rigorous testing before they can be put on the market for sale and use. Airtightness is considere... |
 |
Air-ventilation Aging Test Chamber | Model: YSA-3 | YSA-4 | YSA-6 Product Performance Temperature range: RT+10℃～98℃ Temperature fluctuation: ±0.3C Temperature resolu... |
 |
IP Test Chamber | Many industrial products are exposed to several atmospherical agents in addition to the well-known temperature, humidity and corrosion. Very high d... |
 |
Industrial Drying Oven For Varnish Motors | Model: YPO-6480-300 Product Performance Volume: 6480L Inner size:1.8*2.0*1.8m (w*h*d) Temperature range: RT+25℃～200℃/300℃ Temperatur... |
 |
Steam Aging Test Chamber Of Structure, Installation And Operation | Steam aging test is applicable to electronic connectors, semiconductor ICs, transistors, diodes, liquid crystal LCDs, chip resistors, capacitors, e... |
Same products
 |
High-Efficiency Sludge Dewatering Machine for Wastewater | 卖方: Apoaqua | The sludge dewatering machine produced by Apoaqua follows the principles of force and water in th... |
 |
Climate And Vibration Combined Test | 卖方: Guangdong Yuanyao Test Equipment Co.,Ltd. | Model: YTHV-216 YTHV-343 YTHV-512 YTHV-720 YTHV-1000 Main Parameters: Temperature: 0℃/-20℃/... |
 |
High Temperature Clean Drying Oven | 卖方: Guangdong Yuanyao Test Equipment Co.,Ltd. | Model: YCO-072 YCO-270 YCO-480 YCO-600 YCO-720 YCO-1000 Main Parameters: Dustproof class: C... |
 |
Air-ventilation Aging Test Chamber | 卖方: Guangdong Yuanyao Test Equipment Co.,Ltd. | Model: YTAT-101 | YTAT-216 Main Parameters: Temperature range: RT+25℃～200℃（300℃） Tempera... |
 |
Air-ventilation Aging Test Chamber | 卖方: Guangdong Yuanyao Test Equipment Co.,Ltd. | Model: YTAT-101 | YTAT-216 Main Parameters: Temperature range: RT+25℃～200℃（300℃） Tempera... |
