Machine
Product description
Bright Annealed Tubes Description
Bright annealed stainless steel tubeis a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tubeis mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe. The chemical components of precision bright annealed tube are C, Si, Mn, S, P, Cr.
Bright annealed stainless steel tube can be used for industries like automobile, and mechanical parts which have higher requirements for steel pipe precision and surface finish. Bright annealed stainless steel tubes are not only for higher precision and finish requirements, its tolerance can be maintained in 0.02-0.08mm, so many mechanical processing users gradually replace seamless steel tube or round steel with precision bright annealed tube in order to save labor, material, and time.
The traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called closed furnace. The warmth handled materials is covered by means of an inter-fuel atmosphere, which ensures the oxygen cant enter the furnace or come in to contact with the substances and react to shape scale on or tarnish the materials. The surface end is clean, bright and precision, which is a top-notch beginning point for a similar system, like electro-polishing and mechanical polishing.
Especially for the tube with size greater than 12 meters, the ordinary pickling tube is very hard to clean the internal surface, however, with the bright annealing method, our tubing is much cleaner, smoother on both inner and outer surface. We use bright annealing method, the temperature of the furnace can reach greater than 1350℃, and the tolerance for the putting and real temperature can be controlled Within ±2℃, which is not possible for the regular annealing.
To ensure the quality, all tubes are done 100% PMI, 100% Hydraulic test, 100% inner cleaned by sponge,100% dimension test, and 100% surface test. What is more, our quality of precision drawn tubing is same to precision rolling but has more advantage on price? We are using the advanced cold drawn technology from Japan and Korean, making the close dimension controls. Huashang steel tubing used for instrument tubing, chromatography tubing, hydraulic tubing, high-pressure tubing, cleaned tubing, multi-core tubing.
Type Of Tube: Welded tubing and Seamless Tubing
Straight Tubes Bright Annealing Advantages
Bright Annealed Tubes Sizes
welded tubing size range
OD: 0.19mm--44.5mm, T.W: 0.08mm--3.81mm
Length: CUT TO LENGTH
The seamless straight tubing & bright annealed tubingsizes:
Bright Annealed Tubes Materials
Austenitic Stainless Steel:TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H,TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo. S30432, S31042, N08367Duplex & Super Duplex Steel: S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760Nickel Alloy Steel:N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675Bright Annealed Tubes StandardASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516Heat Treatment: Bright AnnealedNDT: Eddy Current or Hydraulic test or UT
Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
Bright Annealed Tube Pressure Calculation Formula
Pressure =(wall thickness * 2 * tensile strength of steel tube)/(outer diameter * coefficient)
Wall thickness =(pressure * outer diameter * coefficient)/(2* tensile strength of steel tube)
Steel tube pressure P<7Mpa coefficient S=8
7< steel tube pressure P<17.5 coefficient S=6
The pipe pressure P>17.5 coefficient S=4
在线联系供应商
Other supplier products
 |
Aerospace Tubing | Product description Aerospace TubingDescription HUASHANG affords a broad range of grades and dimensions of stainlesss steel tubing for the aerospac... |
 |
Lap Joint Flanges | Product description Lap Joint Flanges Features Forming: forged Stainless Steel Lap Joint Flange Lap Joint Flanges Materials Stainless Steel: OCr18N... |
 |
Equal Tee | Product description We are manufacturer, supplier, and exporter of equal tees, which are also understood as straight tees, these equal tees have a ... |
 |
Forged Flanges | FORGED FLANGES We are forged flanges manufacturer, supplier and exporter for a wide range of quality industrial forged steel pressure flanges in... |
 |
Hydraulic Tubing | Product description Hydraulic Tubing Description Huashang Hydraulic tube in a comprehensive range of corrosion-resistant stainless steels and nicke... |
Same products
 |
Water Bulging Bottle Making Machine | 卖方: Yongkang Hubang Machinery Technology Co., Ltd. | Yongkang Hubang Machinery Technology Co., Ltd. specializes in machinery for thermos and bottle ma... |
 |
TC SERIES 180-210 HP TRACTOR | 卖方: TIANJIN TRACTOR MANUFACTURING CO., LTD | Our company has long specialized in the development of high-horsepower wheeled tractors. This par... |
 |
TVH2704-3504（Hybrid Tractor） | 卖方: TIANJIN TRACTOR MANUFACTURING CO., LTD | Hybrid tractorsadopt a diesel engine plus motor hybrid drive system. Supported by an intelligent ... |
 |
3Y SERIES 100-120 HP TRACTOR | 卖方: TIANJIN TRACTOR MANUFACTURING CO., LTD | With the advancement of agriculture, existing medium-sized tractorsare no longer sufficient to me... |
 |
REAL CASE OF TS SERIES TRACTOR --TTS2404 | 卖方: TIANJIN TRACTOR MANUFACTURING CO., LTD | A 240 Horsepower Tractoris designed for large-scale agricultural operations that require strong p... |
