PRESERVATION LINES
On the preservation line, sheets and profiles are thoroughly blast cleaned and provided with a temporary corrosion protection coating. Along with the external transportation unit, the preservation lineconsists of a pass through blasting and painting machine, a painting unit and a drying tunnel with its associated slat conveyor.
Typical plates widths can vary up to 2500mm, height can vary from 5mm to 1000mm, length can vary from 2000mm to 12000mm.
A shot blasting and priming machine usually consists of specially engineered conveyor systems, a roller conveyor shot blast machine, a pre-heater, an automatic paint spray system and a subsequent dryer. Depending on the customer requirements, different types of conveyor systems may be used, such as roller conveyors, chain or slat conveyors, cross conveyors, etc. The entire line is totally engineered around the specific application and size and geometry of the parts.
The roller conveyor shot blast systems are an essential part of the overall preservation line.The parts (large steel sheets, tubes and round bars, angle bars and I-beams) travel on a roller conveyor through the pre-heater chamber, the blast chamber and a blow-off/brush-off station.
The whole roller conveyor system adopts frequency control step-less speed regulation, is able to synchronous running, each department is capable of independent action.
Blast cabinet’ rollers are with special wear-resistant sleeves to prevent blasting abrasion.
Plate chain conveyor with "v" shaped structure, painted steel short-term exposure to avoid film damage.
As with all roller conveyors Blast Machines the shot blasting cabinet liner is manufactured completely from high manganese. High manganese has a property which is hard enough to deal with the shot blasting from 35HRC to more than 60HRC. They are attached from the outside and are easy to replace. When aggressive shot is used, additional lining of high manganese, tool steel or cast material can be provided. To avoid shot leakage, several rubber layers or curtains are fitted in areas of heavy wear. These are mounted in a V-Track and are easy to replace.
To avoid blast media building upon long parts, the rotation brushes remove the spent abrasive from the workpieces surface into a specially designed trough that has a screw conveyor taking the media back into circulation. To keep the position between the brushes and the screw conveyor constant when blasting different sized work pieces, both are built with the same adjustable framework. Finally, any remaining media on the work pieces will be removed by the blow off station, which is mounted on the same framework and uses high pressure ventilators to blow off any media remaining.
2-level dust collector: settling chamber and cartridge filters. Cleaning efficiency is up to 99.5%.
Filter material from Donaldson, effective filtration area of each filter is up to 15 m³.
Air shock valve with timing device can clean filters regularly.
Economical
The cartridge dust collector is an economical choice because it requires minimal maintenance: only periodic cartridge replacement is necessary.
Fast, simple and safe cartridge replacement
Cartridge replacement is performed outside the dust collector and requires no tools. This eliminates the need to work within a confined space and allows the worker to access the cartridge without getting dirty.
After shot blasting the metal roll goes to painting booth.The painting equipment provides the coating thickness 15-20 micron.To avoid the raw paint damage the metal roll is transferred by the chain conveyor with bearing elements.It provides minimal contact with painted surface.The paint that couldn’t reach the product is taken with air flow and directed to labyrinth filters. The filtered exhaust air is emitted to the atmosphere.
The primer drying chamber works in recycling mode: the heated air is fed from the preliminary drying chamber with 10-15% fresh air intake from “outdoors” to prevent the recycling air oversaturation with solvents.The temperature from 30 С to 80 С is set according from primer type.As well as in painting booth, the transportation is made by chain conveyor with bearing elements.It guarantees minimal contact of painted surface with conveyor surface, protecting the painted surface from damage.
- Paint blasting machine
This system has automatic explosion-proof alarm function for paint mist concentration. Adopt advanced cardboard to filter paint mist, it is maintenance-free within one year, using activated carbon for adsorption of harmful gases. After this system it will be in accordance with the air pollution emission standards. (Paint mist emission standard ≤ 120mg/M3, p-xylene: emissions concentrations ≤ 70mg/M3, the 15 meters height exhaust pipe allows the secondary emission rate is 1.0kg/h. ）
QINGGONG MACHINERY is a professional shot blasting manufacturer, we provide shot blasting machine, shot blaster machineand etc. Want to know blasting media comparison or more? Please contact us.
在线联系供应商
Other supplier products
 |
TUNNEL TYPE SHOT BLASTING MACHINE Free Quote | Tunnel type shot blasting machineis a non-standard shot blasting machine that is according to workpieces information to design. The tunnel type sho... |
 |
Sandblasting Room | sandblasting room designed by QINGGONG Machinery can complete a wide range of blasting jobs for those big and irregular workpieces. Traditional san... |
 |
GAS CYLINDER SHOT BLASTING MACHINE | Gas cylinder shot blasting machineis used to automatically clean the surface of the cylinders by blasting of the abrasive coming from the blast tur... |
 |
SINGLE HOOK TYPE SHOT BLASTING MACHINE | Single hook shot blasting machineis suitable for surface cleaning or strengthening treatment of medium and small castings and forgings in the casti... |
 |
GAS CYLINDER SHOT BLASTING MACHINE | Gas cylinder shot blasting machineis used to automatically clean the surface of the cylinders by blasting of the abrasive coming from the blast tur... |
Same products
 |
DPA Diesel Fuel Injector Pump Cam Ring | 卖方: China Lutong Part Plant | DPA Diesel Fuel Injector Pump Cam Ring7139-841c Tina #Camring 7123-309D# #Camring 7123-309Q# #Ca... |
 |
DPA Camring 7123-309Q | 卖方: China Lutong Part Plant | DPA Camring 7123-309Q Tina #Camring 7123-309D# #Camring 7123-309Q# #Camring 7139-949E# #CAM-RING... |
 |
8/12 行小麦播种机，用于农业种子种植 | 卖方: 湖北永祥农机装备有限公司 | 永祥 8/12 行播种机非常适合播撒所有常见类型的小种子、种子混合物和肥料。支持根据农田条件定制您的需求。 永祥提供组合式 100L 气动播种机，配有雷达传感器、7 级深度调节圆盘开沟机和农田... |
 |
8 行草坪播种机，用于播种草籽 | 卖方: 湖北永祥农机装备有限公司 | 永祥 8 行播种机非常适合播撒草籽、肥料或其他只需撒播或条播的种子。支持根据农田和拖拉机条件定制您的需求。 永祥提供带有雷达传感器和撒播或条播设备的 150L 组合式气动播种机。这使农民能够利... |
 |
8/12 行水稻直接播种机，适用于久保田洋马雷沃水稻插秧机 | 卖方: 湖北永祥农机装备有限公司 | 省时省力。水稻直播就是直接播种，就像小麦一样，省去了育苗、移栽的过程，也不需要占用稻田育苗。 水稻直播没有返青和伤苗的过程，因此生长期比同期移栽水稻要短。水稻直播简单方便，有利于规模化发展。 ... |
