5-axis Machining Center
High-performance and high-precision machining center
The bed and the column are cast in one piece of mineral materia
The headstock adopts an approximate square ram structure
Ourfive axis machining centermainly include bridge 5-axis machining centers and vertical 5-axis machining centers, such as GB8550BF5, VB63F5.
The structure of our 5 axis machining centeris gantry type, which is high steady, high rigidity.
The design of our 5-axis machining centers is that the fixed parts are made from mineral casting and the traveling parts are made of high strength alloy steel which makes our machining centers have excellent precise retention, fast responsibility, and rapid traveling speed.
According to the workpieces, our 5-axis machining centers can choose the A/B swing head or the double swiving rotary table to achieve any angle positioning machining of the complex workpieces.
5-AXIS MACHINING CENTER ADVANTAGES
To make sure the highest precision, stability, and precision preservation of each machine, we take in new casting material UHPC and build our casting workshop. For the current manufacture of the company, all machine bases and columns are cast by UHPC strictly according to German casting standards.
Better Vibration Absorption
The vibration absorption of UHPC mineral casting is 10 times better than iron casting. Under a large dynamic load, the stability of machine precision can be guaranteed, while the surface finish quality of the workpiece can also be improved by 20%.
Excellent Thermal Stability
The thermal conductivity of UHPC mineral casting is 1/20 of that of iron casting, the specific heat capacity is 2.1 times that of iron casting. Excellent thermal stability and thermal inertia can effectively control any kind of machine deformation caused by temperature change, the stability of machine precision is further guaranteed.
High Rigidity
The moving parts are welded by high-strength low-alloy steel, the material elasticity modulus is around 1.4 times that of iron casting so that overall rigidity can be improved by more than 30%.
Lighter Weight
Compared to iron casting, the lighter-weight structure can reduce unit weight by 20%-30%, effectively reduce the inertia of moving parts and increase the dynamic response by 10-20%.
ATC System
The Vertical type 5-Axis is equipment with the chain type tool magazine driven by the servo motor, high running speed, high positioning accuracy that can greatly meet different processing requirements of customers. The tool sleeve running speed: 150 tool sleeves/min, capacity: 40T.
Auto-lubrication System
The machining centers are equipped with an auto-lubrication system that can auto lubricate the Linear Guide Rail, Block, Ball Screw, and Spindle at set time and volume, leaving no dead ends. The CNC machining center's dynamic processing accuracy and stability are guaranteed.
Air Conditioner
The electrical cabinet has an air conditioner, which keeps a constant temperature that guarantees dynamic processing accuracy.
BRIDGE TYPE & VERTICAL TYPE 5-AXIS MACHINING CENTERS
Bridge type 5-axis linkage is achieved by the combination of the C axis inside the ram and the A-axis outside. C axis inside the ram can enlarge the process range. Several attached milling heads can be changed and installed in the C axis, which guarantees the consistency of the positioning axis. The A axis can be low energy big torque transmission through its structure of gear driven by the small motor.
Vertical type 5-axis machining centers structure is double swiving table that can make the 5-axis linkage and any angle positioning machining which meets the demand of the complex curved parts.
As one of the cnc machining center manufacturers, we provide machining cnc centre, horizontal turning lathe, cnc machinery for saleand etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
AEROSPACE CNC MACHINING | DEED Precision uses advanced technology and the best engineering solutions to provide the most accurate parts for aerospace-with fewer changes and ... |
 |
Gantry CNC Milling Machine | PROVIDE PROFESSIONAL SOLUTIONS FOR DIFFERENT PROCESSING NEEDS New minerals and new materials Full stroke machining tool Model of efficient... |
 |
Vertical Machining Center | High-performance Milling Provides professional solutions for different services Our Vertical machining centers mainly include VMC and VL two se... |
 |
HBP Series Planer Type Milling and Boring Machine | The X/Y/Z servo axis adopts the servo motor direct connected precision planetary reducer to drive the large-diameter, high-precision double nut pre... |
 |
VL-SERIES VERTICAL MACHINING CENTER | VL series vertical machining center is a small and medium-sized vertical machining center designed by Germany and made in China. It mainly aims at ... |
Same products
 |
XTY-1000W11080-60 Large-sized Full Automatic Balers | 卖方: JIANGSU XUTIAN ENVIRONMENTAL PROTECTION MACHINERY CO., LTD. | XTY-1000W11080-60 is a full automatic baler with 100T pressure controlled by the comprehensive to... |
 |
XTY-1A Kitchen Garbage Balers | 卖方: JIANGSU XUTIAN ENVIRONMENTAL PROTECTION MACHINERY CO., LTD. | This product is very suitable to use in the vessels,drilling platform, harbor, hospitals etc. bec... |
 |
XTB-200 Baling And Bagging Machines | 卖方: JIANGSU XUTIAN ENVIRONMENTAL PROTECTION MACHINERY CO., LTD. | XTB-200 is a manual feeding bagging baler and baling machine.Its operation is very simple: only o... |
 |
XTR- 2000W11075-150 Large-Sized Full Automatic Two Ram Balers | 卖方: JIANGSU XUTIAN ENVIRONMENTAL PROTECTION MACHINERY CO., LTD. | XTR-2000W11075-150 is strongly designed with high strength and wear. Insist materials make the ma... |
 |
2500W15085-150 Large-Sized Full Automatic Two Ram Balers | 卖方: JIANGSU XUTIAN ENVIRONMENTAL PROTECTION MACHINERY CO., LTD. | XTR-2500W15085-150 can handle many kinds of waste materials, not only common daily materials like... |
