SDS Steel Fiber
There are many types of steel fibres used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength and shear strength, and have good toughness, crack resistance, earthquake resistance, seepage control, and other functions. Widely used in industrial factory floors, highways, high-speed rail, bridges, airports, tunnels, water conservancy, electric power, municipal engineering, etc. The company has passed ISO9001 certification, and its products are exported to Southeast Asia, Europe, America and etc. Welcome to contact us for more information about steel fibers for concrete reinforcement.
Steel Fibre Types
Loose Hooked End Steel Fiber
It is used in industrial floors and etc.
Micro Copper Coated Steel Fiber
It is widely used in Reactive Powder Concrete. The raw materials used in the production of RPC cover mainly include: 425R ordinary portland cement, quartz sand, steel fiber, micro-silica powder, slag powder, RPC special additive, clear water and etc.
Glued Hooked End Steel Fiber
It is widely used in industrial floors, parking lot, road pavement and etc.
The Formation of Steel Fiber
Steel fibers are defined in ASTM A820 as pieces of smooth or deformed fibers that are sufficiently small to be dispersed at random in a concrete mixture. ASTM A820 steel fibre reinforcement designates tensile requirements, dimensions and permissible variations. There are mainly 4 steps for steel fibers based on our production process:
Raw Material
Dry Drawing
Glued
stampling & Forming
The Benefits of Steel Fiber
For the same mixing and construction, there is no need to add equipment or increase the construction cost of metal fibers for concretedue to the low steel fibre cost.
Under the same strength requirement, metal fibers for concrete can replace steel mesh and reduce the pouring thickness of concrete by 15-25%.
Improve the construction conditions, mixing vehicles and construction personnel can reach the site directly, and shorten the construction period by 30%. Steel fiber reinforced concrete has high tensile strength, which can prolong the distance between contraction joints and facilitate continuous and rapid pouring of concrete.
Convenient construction, saving labor, greatly shortening the construction period and saving the total steel fibre cost.
The Working Principle of Steel Fiber
Steel fibers for concrete reinforcementreinforce in three dimensions throughout the entire concrete matrix. Metal fiber concrete performance is based on the combination of the tensile strength, aspect ratio(length/diameter) and anchorage. The distributed steel fiber reinforcement restrain micro-cracking and redistribute accumulated stress caused by applied loads and shrinkage. The sooner the crack is intercepted and its growth is inhibited, the less chance the crack will occur.
There are many steel fiber suppliers, but we are one of the best choices for you.
在线联系供应商
Other supplier products
 |
Steel Fiber For Fatigue Resistance | Fatigue resistance of steel fiber compared with ordinary concrete, the flexural and compressive fatigue properties of steel fiber reinforcedconcret... |
 |
SDS Steel Fiber | There are many types of steel fibres used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enha... |
 |
Steel Fibers For Shotcrete | Steel fiber for shotcrete -SFRS Steel fiber reinforced shotcrete(SFRS-steel fiber reinforced shotcrete) is referred to as "steel shotcrete", which... |
 |
Steel Fiber Solutions | Concrete Fiber Solutions Steel Fibers For Crack Control The steel fiber has high tensile strength of 1000Mpa, which could ensure it will not be br... |
 |
SDS Steel Fiber | Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber manufacturerspecializing in steel fiber production in China a... |
Same products
 |
Optical Fiber Splicer | 卖方: Shenzhen Puhuixin Tecnhnology Co., Ltd. | Splicing for fiber optic cablefor sale is mainly used for the construction and maintenance of opt... |
 |
Optical Fiber Patch Cord | 卖方: Shenzhen Puhuixin Tecnhnology Co., Ltd. | A fiber patch cord 10 meteris also known as a fibre optic connector, it is a fibre optic cable eq... |
 |
Mechanical Optical Switch | 卖方: Zhongshan Meisu Technolody Co.,Ltd | MEISU's Mechanical Optical Switch is driven by a relay to control the prism to turn, thus switch ... |
 |
Linear Fiber Array | 卖方: Zhongshan Meisu Technolody Co.,Ltd | Products One dimensional linear fiber arrayis made by placing M / MM / PM fibers on a V-grooved ... |
 |
Lensed Fiber | 卖方: Zhongshan Meisu Technolody Co.,Ltd | In some optical application, lens, reflector and other micro-optics components are normally neede... |
