Self drilling bolt in surrounding rock of tunnels
Large quantity of engineering construction shows that broken rock mainly takes place in surrounding rock of tunnels, with the characters
of deformation and abruptness, it’s hard to deal with the problems exist in tunnel support of hard tunnel only by ,
especially in the hard tunnel at jointed fractured zone.
is one of supporting methods for projects and it is widely accepted in the world at the present stage. Its
supporting quality has direct relation to the stability of projects.
So after long-time construction experience, following requirements is necessary for self drilling anchor bolt.
1. Self drilling anchor bolt’s length, separation distance, array pitch, insertion direction and arrangement mode should accord with
construction demand.
2. Drill hole site should be confirmed and then adjust direction.
3. After drilling, self drilling anchor bolt should be installed in time according to its design and installation instruction.
4. Hole site, hole depth, hole diameter and accessories should be checked to reach specification.
5. The exposed length of self drilling anchor bolt should meet design requirement.
6. The direction of installation should be vertical with plate. Surface contact between plate and surrounding rocks should be tight and
avoid adding extra load on it.
7. Self drilling anchor bolt should not be bent during installation.
8. Inspection work of self drilling anchor bolt’s construction quality should be done.
在线联系供应商
Other supplier products
 |
Self drilling anchor bolt of | The importance of is pretty obvious. Without SDA bolts, most construction professionals and builders would find it real difficult to attach certai... |
|
|
For temporary works and foundations with Sinorock self drilling anchors | The ability of Sinorock to provide effective solutions without the need for additional casing operations enables designers, developers and contrac... |
|
|
Efficient anchoring mean for civil work - Sinorock Self drilling hollow bar | Sinorock is manufactured from heavy wall steel tube. Self drilling hollow bar are widely used as an efficient anchoring means, for drilling, grout... |
|
|
Sinorock injection anchors are a cost effective way to build a safe, lasting structure | The aim of ground support is to provide safe working conditions during the temporary construction activities and to give a sufficient long-term sta... |
|
|
Sinorock is committed to deliver “Total Solutions”of self drilling anchor | At Sinorock, we are an experienced distributor of many types of and other important products. With an expansive range covering over a dozen product... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
