Mud Pump
Ram BOP
Single and double ram type BOPs are widely used in oilfield and offshore platform. They have the features of compact structure, easy handling and reliable seal. The pipe ram adopts the pressure increasing seal way, which makes it seal drill tool rapidly and efficiently, even remain its seal effect after the disappearance of fluid control pressure.
The open or close of ram preventor and ram replacing are both hydraulically controlled. The onsite replacing of pipe ram and sealing parts saves much time.
•Driving mode：Manual & hydraulic
•End connection：Flanged and bolted
•Working pressure：2000~10000PSI
•Nominal bore：90mm、120mm、179.4mm、279.4mm、346mm
•Executive standard: API 16A and relevant specification
Annular BOP
In case of blowout and well-sealing is needed,high pressure oil coming from control system enters the bottom closing chamber from bottom inlet to push piston moving upward.The movement of piston forces tubber core to move upward along the sphere surface, then supporting ribs get closer to push the internal rubber towards the wellhead center to fulfill the function of sealing drill equipment or the wellhead. When unlocking the seal is needed,hydraulic oil pushes the piston moving downward and the rubber core will reset to its original under its elastic force.
Structure Characteristics
1.The connection between top cap and housing ,top and bottom ends adopt flanges and bolts.
2.Semisphere rubber core has many advantages,such as not easy folding back, big volume of rubber storage.Under the well pressure,the piston pushes the rubber core upward to form a funnel shape.The funnel effect of rubber core increases its sealing performance and life span.
3.Characteristics of the sealing structure
The BOP has three important sealing positions:piston external surface seal,piston internal surface seal and mud blocking ring seal.Radial direction cross sectionof the piston comes of the shape"Z",which makes the piston have short stroke length,low height and big diameter.There are two wear-rings stick to the external surface of the piston and a wear-ring stick to the internal surface of the housing.The structure prevents metal to metal contact and protects piston and housing.
Other supplier products
|
|
Junk Mills |
Casing Scraper
The Casing Scraper is used to clean out the dirt which may be left over internal wall of casing, such as cement scale, sandy soil, ... |
|
|
Junk Mills |
Drill Pipe
Standard: API 5D
Specification: OD: 2 3/8”-6 5/8”
Steel Grade: E75, X95, G105, S135
Internal Coating: TK34, TC2000, TC3000
Hardband... |
|
|
Mud Pump |
Check Valve
Usually used for Kill Manifold
The sealing face of core and seat is overlaying-welded with hard alloy with erosion and corrosion resi... |
|
|
Junk Basket |
Reverse Circulating Junk Basket
Reverse Circulating Junk Basket Type LL is used to retrieve small-sized fishes, such as cone, cutter, hand tools a... |
|
|
Junk Mills |
Spider
The Hinged Casing Spider
It has a hinged spider body with a split insert bowl. It is put above rotary table, can handle most casings of... |
供应产品
Same products
