Marine Dredge pump
Marine Dredge pump
China Deyuan Marine Fitting Co.,ltd are leading supplier of marine pumps
1. The close combination of dredging pump with hydraulic coupling to form a separate unit gives a smaller length and floor space
2. During the operation the hydraulic coupling can adjust the pump Speed, to have the pumping system and the drive system (like diesel engine and etc.) work in optimum, resulting in higher efficiency, lower energy consumption and lower cost.
3. The wet end parts have a long lift time, especially the impeller can attain a maximum working hours, leading to a saving of spare parts.
4.The hydraulic coupling can absorb vibration as well as adjust the speed. It also gives a good protection when over-load or emergency happen.
5. Low budget, lower than the unit of pumps with reducer casing and adjusting device.
&&&&&&:
275N CE approval inflatable life jacket
CO2 fire extinguishing system
Marine horizontal/vertical oil fired boiler
Marine air compressor
marine centrifugal pump
marine hydraulic steering gear
Hydraulic capstan
Tunnel thruster/bow thruster
Other supplier products
|
|
16KN Hydraulic anchor windlass and mooring winch |
China deyuan marine fitting Co.,ltd are leading supplier of anchor, anchor windlass,anchor chain, made of Grade 2 and Grade 3 steel diameter from 1... |
|
|
Launching appliance of free-fall lifeboat |
Launching appliance of free-fall lifeboat
China Deyuan Marine fitting Co.,ltd are leading supplier of marine life boat and boat accessories,such ... |
|
|
marine forged steel stop check valve |
marine forged steel stop check valve
China Deyuan Marine Fitting Co.,ltd are leading supplier of different type of marine valve,we can offer marin... |
|
|
CLV series marine vertical centrifugal pump |
marine vertical centrifugal pump
China Deyuan Marine Fitting Co.,ltd are leading supplier of marine pumps,such as marine diesel emergency fire pu... |
|
|
62KN Electric anchor windlass and mooring winch |
China deyuan marine fitting Co.,ltd are leading supplier of anchor, anchor windlass,anchor chain, made of Grade 2 and Grade 3 steel diameter from 1... |
供应产品
Same products
|
|
NCM-4.8型内燃道岔打磨机 |
卖方: 842518 |
NCM-4.8型内燃道岔打磨机是适用于铁路行业的专用机械，该机主要用于钢轨道岔的养护作业，也可用于普通钢轨的养护作业。该机具有工作效率高、操作简便、上下道快速、适应范围广等特点，受到用户的广泛好评。 |
|
|
72V智能锂电仿形打磨机 |
卖方: 842518 |
1. 72V锂电动力直流电控系统，带过流、过压、欠压、高温等安全保护功能
2. 双操作系统，既可以机械式摇轮进给，又可以电子进给
3. 电子进给分档式设计，不同打磨阶段，进给的精度不同，提供... |
|
|
36V锂电捣固镐 |
卖方: 842518 |
产品优点： 1. 智能数显，实时显示剩余电量和使用时间（业内首创） 2. 三级减震，减少操作者的工作疲劳 3. 电池通过UN38.3国际安全认证和GB34570双重安全认证 4. 高海拔正常使用... |
|
|
ND-5内燃冲击捣固镐 |
卖方: 842518 |
ND-5内燃冲击捣固镐是一种轻便高效的捣固工具，它具有结构紧凑、重量轻、效率高、操作简便、省力、减震效果好等特点，适用于多种路况的破碎及捣固作业。
适用于混凝土、砖石、沥青、岩石、泥土等破碎及... |
|
|
ND-4内燃捣固镐 |
卖方: 842518 |
内燃捣固镐是铁路道床养护的一种小型养路机械，主要适用于道岔及繁忙线路上利用列车间隔进行的捣固作业，它具有重量轻、体积小、性能优良、坏损率低、上下道方便迅速、操作轻便等优点。 |
