exhaust-gas economizer for marine boiler
exhaust-gas economizer for marine boiler
China Deyuan Marine Fitting Co.,ltd .EGE-series exhaust-gas economizer usually is jointly used with oil-fired boiler to take use of compelling circulation water pipe structure, the produced hot water will go to the oil boiler first, without much heating, the steam needed will be produced here. Without cylindrical boiler shell, the water pipe is also the heat-transferring surface, therefore, compared with natural circulation EGB-series exhaust-gas boiler, EGE-series exhaust-gas economizer is lighter, smaller and more economical when they enjoy the same heating surface.
The most advanced pin-tube is installed in this series economizer as its heat-transferring element; however, the phototube and extended-surface tube can also be installed if there is a particular requirement.
&&&&：275N CE approval inflatable life jacket
CO2 fire extinguishing system
Marine horizontal/vertical oil fired boiler
Marine air compressor
marine centrifugal pump
marine hydraulic steering gear
Hydraulic capstan
Tunnel thruster/bow thruster
Other supplier products
|
|
Marine Forged Steel Male Thread Stop Valve |
Marine Forged Steel Male Thread Stop Valve
China Deyuan Marine Fitting Co.,ltd are leading supplier of different type of marine valve,we can offer... |
|
|
73KN Hydraulic anchor windlass and mooring winch |
China deyuan marine fitting Co.,ltd are leading supplier of anchor, anchor windlass,anchor chain, made of Grade 2 and Grade 3 steel diameter from 1... |
|
|
marine horizontal self-priming centrifugal oil pump |
marine horizontal self-priming centrifugal oil pump
China Deyuan Marine Fitting Co.,ltd are leading supplier of marine pumps,such as marine diese... |
|
|
open type FRP life boat |
open type FRP life boat
Open FRP Life boat is an economical product and which could meet requirements of common life saving.And it is applicable f... |
|
|
marine female thread bronze globe valve |
marine female thread bronze globe valve
China Deyuan Marine Fitting Co.,ltd are leading supplier of different type of marine valve,we can offer ma... |
供应产品
Same products
|
|
NCM-4.8型内燃道岔打磨机 |
卖方: 842518 |
NCM-4.8型内燃道岔打磨机是适用于铁路行业的专用机械，该机主要用于钢轨道岔的养护作业，也可用于普通钢轨的养护作业。该机具有工作效率高、操作简便、上下道快速、适应范围广等特点，受到用户的广泛好评。 |
|
|
72V智能锂电仿形打磨机 |
卖方: 842518 |
1. 72V锂电动力直流电控系统，带过流、过压、欠压、高温等安全保护功能
2. 双操作系统，既可以机械式摇轮进给，又可以电子进给
3. 电子进给分档式设计，不同打磨阶段，进给的精度不同，提供... |
|
|
36V锂电捣固镐 |
卖方: 842518 |
产品优点： 1. 智能数显，实时显示剩余电量和使用时间（业内首创） 2. 三级减震，减少操作者的工作疲劳 3. 电池通过UN38.3国际安全认证和GB34570双重安全认证 4. 高海拔正常使用... |
|
|
ND-5内燃冲击捣固镐 |
卖方: 842518 |
ND-5内燃冲击捣固镐是一种轻便高效的捣固工具，它具有结构紧凑、重量轻、效率高、操作简便、省力、减震效果好等特点，适用于多种路况的破碎及捣固作业。
适用于混凝土、砖石、沥青、岩石、泥土等破碎及... |
|
|
ND-4内燃捣固镐 |
卖方: 842518 |
内燃捣固镐是铁路道床养护的一种小型养路机械，主要适用于道岔及繁忙线路上利用列车间隔进行的捣固作业，它具有重量轻、体积小、性能优良、坏损率低、上下道方便迅速、操作轻便等优点。 |
