A complete set of potato starch equipment
A complete set of potato starch equipment
1. Raw material reception unitThe unit is the first step of potato starch processing. The main purpose of this unit is to preliminary remove impurity and put them into storage pool.
When unloading potatoes, it is better to use special shovels to prevent the potatoes from damaging. Potato storage time can't exceed half a month. The longer the potatoes are stored, the more adverse for the starch production.
Attention must be taken that potatoes should not be damaged at time of purchase. Damaged potato is perishable, and the rotten potato will affect the potatoes around easily. The quality of potatoes has very big influence on the quality of potato starch.
2. Hydraulic transport unitThe main purpose of this unit is to convey potatoes of the potato storage tank into conveying screw elevator and conveyor by flow conveying, and then convey them to a de-stoner through a flow trough. In the process of conveying, potatoes continuously roll and clash in stream flow to peel off sticky mud of potato, it plays a very good cleaning effect.
Other supplier products
|
|
Starch hydrocyclone washing machine |
Starch hydrocyclone washing machine
1. Features: The cyclones produced by our company are mainly for solid-liquid continuous separation, concentr... |
|
|
Starch hydrocyclone washing machine |
Starch hydrocyclone washing machine Features: The cyclones produced by our company are mainly for solid-liquid continuous separation, concentration... |
|
|
Potato starch equipment |
Potato starch processing and manufacturing technologies
1. Stone extractor
2. Wash potato machine
3. transportation equipment (feeding spiral)
4. b... |
|
|
Cassava starch machinery |
Cassava starch machinery
1. Raw material receiving unit Material receiving unit is the first link of cassava starch processing. The primary purpose... |
|
|
Grit removal equipment |
Grit removal equipment
Uses: It is mainly used to remove sediment and impurities such as metals in the starch processing, and also applicable to re... |
供应产品
Same products
|
|
钢轨磨耗测量尺 |
卖方: 842518 |
LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
|
|
道岔尖轨侧磨量及降低值检测尺 |
卖方: 842518 |
尖轨是转辙器中的重要部件，依靠尖轨的扳动，将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展，加速了道岔尖轨的磨损和报废，特别是尖轨的侧磨较为严重，要经常测量尖轨的磨耗状态，给出... |
|
|
滑动式钢轨磨耗尺 |
卖方: 842518 |
LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值，侧面磨耗值和尖轨降低值。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
|
|
数显式 辙叉结构高度测量器 |
卖方: 842518 |
LJ-ZC-A钢轨辙叉磨耗测量尺主要以辙叉两边的翼轨未磨耗面做为磨耗测量的基准面，分别测量辙叉心宽40mm断面处辙叉心垂直磨耗和翼轨垂直磨耗量。 |
|
|
尖心轨降低值测量尺 |
卖方: 842518 |
辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |
