Batch off line

Function: the batch off line is used for cooling, folding and depositing the rubber strip that comes from the open mills or twin screw extruder.
Structure: there are two structure types: overhead and floor-standing types, whose hanging racks are vertically turning with compulsive cooling. The rubber strip hanging bar adopts step by step cylinder or motor-reducer for driving. It consists of mainframe and electrical control system. The mainframe is composed of splicer, printing, slitter, isolation cooling, lifting device, hanging strip cooling, auto wig wag section, weighing, handrail, platform and supporting bracket etc. The electrical control system consists of main control cabinets, and there are emergency stop device in key areas.
The clients can choose high or low disposition according to the practical requirements. The high disposition batch-off line has hydraulic auto wig wag section, which can battle the rubber strip tidily, the strip tidy ratio≤100mm. There are three working positions for auto entering and outputting of material tray; auto rubber collecting device; auto cutter device; it has high automatization and can realize nobody operating.
Main parameters:
type XPG-600-700 XPG-800-900
Available slab specifications （4-12）×600-700 （4-12）×800-900
Front take-away conveyor belt max linear velocity 400m/min 400m/min
Rubber strip hanging mbar moving speed 0.117-2.2m/min 400m/min
Axial fan 0.37kw 5760m3/h 0.37kw 5760m3/h
Swing range and frequency 1.3m 10-16times/min 1.3m 10-16times/min
Rubber strip temperature After cooling ≤Room temperature +5℃ ≤Room temperature +5℃
Speed-adjusting frequency motor of lifting swing device Xwd1.5-3-1/11 Xwd7.5-7-1-1/43
Speed-adjusting frequency motor of rubber swing device Xwd1.1-5-1/87 Xwd1.1-5-1/87
Rubber bar pitch 160 or 101.6 160 or101.6
Max hanging height of rubber sttip 1400mm 1400mm

Other supplier products

	Hot Press Platen	Specification 1. Flatness tolerance: 0.05+0.05/1000.Lmm2. Parallelism tolerance: 0.05+0.05/1000.Lmm3. Surface roughness: 1.64. Surface temperature ...
	Single Side Hot Press	Single side hot press is mainly applied for single-sided wood panel. It deals with one side of the board every time. It is the most economic model ...
	Press Machine For Steel Plate Straightening	The pressing-head of machine can move in three dimensions and reach any positions within the effective range of working table, to straighten struct...
	Molding Press Hot Machine	Wuxi Enork International Co.,Ltd is one of the China other hot press parts manufacturer and supplier, as a professional other hot press parts compa...
	Pillar type plate vulcanizer	The machine is used for pressing all kinds of rubber model products, rubber plate, thermosetting plastic, and so on. It is also can be used as comm...

供应产品

Same products

	钢轨磨耗测量尺	卖方: 842518	LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。
	道岔尖轨侧磨量及降低值检测尺	卖方: 842518	尖轨是转辙器中的重要部件，依靠尖轨的扳动，将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展，加速了道岔尖轨的磨损和报废，特别是尖轨的侧磨较为严重，要经常测量尖轨的磨耗状态，给出...
	滑动式钢轨磨耗尺	卖方: 842518	LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值，侧面磨耗值和尖轨降低值。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。
	数显式 辙叉结构高度测量器	卖方: 842518	LJ-ZC-A钢轨辙叉磨耗测量尺主要以辙叉两边的翼轨未磨耗面做为磨耗测量的基准面，分别测量辙叉心宽40mm断面处辙叉心垂直磨耗和翼轨垂直磨耗量。
	尖心轨降低值测量尺	卖方: 842518	辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。