SP-4125 Four Colors Curved Offset Surface Cup Printer
Main Motor Power 5.5kW
Conveyer Motor Power 0.37kW Take Off Conveyer Motor 0.37kW
Curling UV Curing On Mandrel Curing Power 2×2.5kW
Vacuum Pump Power 2.2kW
Vacuum Pump Tolerance 4.8m³/min
Air Pressure 0.7Mpa Air Consumption 0.6l/min
Power 380V 3-Phise 50Hz Machine Weight App.5T
在线联系供应商
Other supplier products
 |
SP-510X570 Automatic Air-pressure BOPS Thermoforming Machine | configuration SP3021B 3in1 Upper Forming Station Servo drive +frequency drive Plug assist Pneumatic or servo motor Cutting station Double Servo dri... |
|
|
SP-4125 Four Colors Curved Offset Surface Cup Printer | Main Motor Power 5.5kWConveyer Motor Power 0.37kW Take Off Conveyer Motor 0.37kWCurling UV Curing On Mandrel Curing Power 2×2.5kWVacuum Pump ... |
 |
SP-15T Water Cooling Tower | Model Height(mm) Diameter(mm) Base Dia.(mm) Motor Power Water Discharge(Inch) Weight Running Weight 15T 1860 1180 876*3feet 0.376KW 2 82Kg 320Kg |
 |
SPJ110*33/660 Mono Layer PP/PS Plastic Sheet Extruder | configuration SP3021B 3in1 Upper Forming Station Servo drive +frequency drive Plug assist Pneumatic or servo motor Cutting station Double Servo dri... |
 |
SPJ110*33/660 Mono Layer PP/PS Plastic Sheet Extruder | I. QUANTITY: ONE SETII. MAIN PARAMETERS:1. Processed Material: PP/PS Granule or powder2. Max. width of finished product after slitted: 660mm3. Thic... |
Same products
 |
钢轨磨耗测量尺 | 卖方: 842518 | LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
 |
道岔尖轨侧磨量及降低值检测尺 | 卖方: 842518 | 尖轨是转辙器中的重要部件，依靠尖轨的扳动，将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展，加速了道岔尖轨的磨损和报废，特别是尖轨的侧磨较为严重，要经常测量尖轨的磨耗状态，给出... |
 |
滑动式钢轨磨耗尺 | 卖方: 842518 | LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值，侧面磨耗值和尖轨降低值。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
 |
数显式 辙叉结构高度测量器 | 卖方: 842518 | LJ-ZC-A钢轨辙叉磨耗测量尺主要以辙叉两边的翼轨未磨耗面做为磨耗测量的基准面，分别测量辙叉心宽40mm断面处辙叉心垂直磨耗和翼轨垂直磨耗量。 |
 |
尖心轨降低值测量尺 | 卖方: 842518 | 辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |
