Mig overlaying hardfacing welding wire
ACE-D01
Mainchemicalcomponent:
C:0.06-0.15
Si:0.60-1.10
Mn:1.50-2.50
Cr:0.50-1.00
Others:2.00-3.00
Hardness:280-320HB
Microstructure:ferrite+bainite
Application:surfacingtransitionlayerforliftingcrane,minecar'swheel/axel/gear/roller
NantongAceweldingproducesallkindsofoverlayinghardfacingfluxcoredweldingwireforsteelworks,forelectricfactory,forminingmachine,formould,forvalve,forsugarmill,fordiggeretc.wehavetheabilitytodevelopnewtypeofwiresorcopythemodels.
在线联系供应商
Other supplier products
 |
Overlaying hardfacing submerged arc welding wire | ACE-D02 C:0.20-0.40 Si:0.05-0.50 Mn:3.60-4.10 Cr:1.00-4.00 Others:1.00-2.00 Hardness:300-350HB Microstructure:bainite Application:surfacingtransiti... |
 |
Welding plant | Thefluxcoredweldingwireproductionlinepossessestheadvantagesofpresentlyhigh-techequipments.Theproductionabilityismorethan3000T/yearoneline.Ourengine... |
 |
Welding wire making machine | Thefluxcoredweldingwireproductionlinepossessestheadvantagesofpresentlyhigh-techequipments.Theproductionabilityismorethan3000T/yearoneline.Ourengine... |
 |
All kinds of hardfacing flux cored welding wire | ACE-135-S Mainchemicalcomponent C:0.10~0.40Si:0.20~0.80 Mn:0.60~1.50Cr:1.80~2.80 W:3.00~4.00V:0.40~0.70 Others:0.50~1.50 Hardness：37~40HRC Applicat... |
 |
Hardfacing welding mig wire roll | ACE-6137-O ACE-6137-S Mainchemicalcomponent C:0.80~1.50 Mn:12.00~15.50 Cr:5.50~9.50 Others:2.00~3.00 Hardness：250~300HB Application:Railsurfaceands... |
Same products
 |
Sewing Machine Spare Parts | 卖方: Jinzen Intelligent Technology (Dongyang) Co., Ltd. | Sewing Machine Spare Parts B2001-771-0A0 LBH-780 One of the key features of our spare parts is t... |
 |
钢轨磨耗测量尺 | 卖方: 842518 | LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
 |
道岔尖轨侧磨量及降低值检测尺 | 卖方: 842518 | 尖轨是转辙器中的重要部件，依靠尖轨的扳动，将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展，加速了道岔尖轨的磨损和报废，特别是尖轨的侧磨较为严重，要经常测量尖轨的磨耗状态，给出... |
 |
滑动式钢轨磨耗尺 | 卖方: 842518 | LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值，侧面磨耗值和尖轨降低值。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
 |
数显式 辙叉结构高度测量器 | 卖方: 842518 | LJ-ZC-A钢轨辙叉磨耗测量尺主要以辙叉两边的翼轨未磨耗面做为磨耗测量的基准面，分别测量辙叉心宽40mm断面处辙叉心垂直磨耗和翼轨垂直磨耗量。 |
