OEM Precision Stamping Mould Parts/ HSS Punch Pins
Shaping Mode:Punching Mold
Material:Carbide, HSS M2(SKD11), M35(SKD51), M42(SKD61)
Surface Treatment:TiCN,TiN, Aitain,Ticrn,Nitrided,
Tolerance:0.003mm-0.01mm
Hardness:60-62HRC
Machine type:punching machine
Certification:ISO9001:2008
Samples:Avaliable
在线联系供应商
Other supplier products
 |
Cold Forging Screw Heading Dies/Forging Heading Die | Shaping Mode:Forging Mould, Punching Mold Type:Square Header , hexagonal , R-shaped... Material:VA80,H13,SKD61,ST6,ST7,KG5,KG6,HRC46-47 Surface ... |
 |
高质量紧固件模具冷镦模 | Tungsten Carbide Die has been a substitute of steel mould which is used to stretching steel and non-ferrous metal, with the property of high wear r... |
 |
Hex Punch Pins with TiN coating | Die punches, dowel pin. punch pin. block punch. collector pin. pilot punch, ejector punch pin, piercing punch,carbide punches, die buttons,embose p... |
 |
Die Cutting Mould/ Tungsten Carbide Dies | Model Number:HH01008 Shaping Mode:Extrusion Mould Material:VA80,H13,SKD61,ST6,ST7,KG5,KG6 Tolerance:+/-0.01 Certification:ISO9001:2008 Samples... |
 |
High Precision HSS Die Punch Pin | Brand Name:Henghui Model Number:HH01005 Material:Carbide,HSS,M42,M2 Surface Treatment:TiCN,TiN, Aitain,Ticrn,Nitrided, Tolerance:0.003mm-0.01mm... |
Same products
 |
Sewing Machine Spare Parts | 卖方: Jinzen Intelligent Technology (Dongyang) Co., Ltd. | Sewing Machine Spare Parts B2001-771-0A0 LBH-780 One of the key features of our spare parts is t... |
 |
钢轨磨耗测量尺 | 卖方: 842518 | LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
 |
道岔尖轨侧磨量及降低值检测尺 | 卖方: 842518 | 尖轨是转辙器中的重要部件，依靠尖轨的扳动，将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展，加速了道岔尖轨的磨损和报废，特别是尖轨的侧磨较为严重，要经常测量尖轨的磨耗状态，给出... |
 |
滑动式钢轨磨耗尺 | 卖方: 842518 | LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值，侧面磨耗值和尖轨降低值。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
 |
数显式 辙叉结构高度测量器 | 卖方: 842518 | LJ-ZC-A钢轨辙叉磨耗测量尺主要以辙叉两边的翼轨未磨耗面做为磨耗测量的基准面，分别测量辙叉心宽40mm断面处辙叉心垂直磨耗和翼轨垂直磨耗量。 |
