.

80 tons easy operation ship building dock gantry crane

Product Description

80 tons easy operation ship building dock gantry craneis applied outside warehouse or railway sideways to do common lifting and unloading works, 80 tons easy operation ship building dock gantry craneis composed of bridge, support legs, crane traveling mechanism, trolley, electric equipment, strong lifting winch, the frame adopts box or truss type welding mechanism, crane traveling mechanisms are operated in the driver cabin or remote control, Power is supplied by cable or slide wire, there are different capacity gantry crane for your choice according to your different use.

Electrical and Control Equipment

80 tons easy operation ship building dock gantry cranethat we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions.

Our service

  1. 80 tons easy operation ship building dock gantry cranewill be tested before shipment.
  2. 80 tons easy operation ship building dock gantry cranebefore delivery, we'll help apply for invitation letter and visa.

2 Installation

Professional technical staffs provide installation, commissioning and training services. The installation team can be sent to local site to install for customer.

3 Warranty

18 months warranty after the factory delivery.

4 Delivery

Delivery with English user manual, parts manual, product certification and other relevant certificates.

5 Technical Support

Design and draw suitable solutions and possibilities.

Provide online consultant service.

Packing&Delivery

Delivery:

  1. 80 tons easy operation ship building dock gantry craneare suitable for container ship, usually by container;

FAQ

a: Lift capacity b: Lift height c: Span d: Power source f:Working environment.

More details, more better. If you have the drawing will be best.

A: Pendent controller with push buttons

B: Remote control with push buttons

C: Cabin control with joystick.

Of course, we can. For example grab, lifting belt, electromagnet. You could tell us when enquiry.

  1. 80 tons easy operation ship building dock gantry crane?

Our senior engineer can be your side to do the installation guide service and training.

Overload limiter, Limit Switch (lifting and traveling), Interlock protection device, Buffer, Overhaul cage, Rail clear plate, Protective cover, Bus bar preventer plate, Anticollision device, Main isolating switch, Emergency stop system, Motor overload protection and so on.


在线联系供应商

至: Huada Heavy Industry
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

定制电动葫芦移动式半龙门起重机
定制电动葫芦移动式半龙门起重机 产品描述 电动葫芦移动式半龙门起重机与CD MD电动葫芦配套使用。它是一种带轨道的中小型起重机。起重能力3-32吨,跨度12-20米,工作环境温度- 20c -+40C。本产品为通用起重机。主要用于户外场所和仓库装卸搬运物料。本产品有地面控制和室内控制两种方法。关于我们 我们的优势 在华大重工...
公路铁路起重混凝土大梁移动式橡胶轮胎龙门起重机RTG起重机价格
公路铁路起重混凝土大梁移动式橡胶轮胎龙门起重机RTG起重机价格 产品描述 公路铁路吊装混凝土大梁移动式橡胶轮胎门式起重机RTG起重机价格采用柴油发动机交流发电机供电,现场无需铺设轨道即可双向移动。大型无内胎轮胎的轴承。轮数是根据地面轮压的要求设计的。操作驾驶室的整个吊车。 车身结构也有箱式和桁架式两种。 我们公司 华大重工是一家专业从事研发、生产、安装、标...
高质量的300吨预制梁悬索桥桥段提升机采用平衡悬臂法
高质量的300吨预制梁悬索桥桥段提升机采用平衡悬臂法 产品描述 自2006年以来,我们一直在设计、供应和操作分段升降机(也称为发射龙门或发射格栅)。我公司生产的300吨预制梁式悬索桥桥段提升机,已广泛应用于悬索桥、斜拉桥、陆海高架桥的钢、混凝土桥面吊装。 我们提供完整的设计和供应服务,现场监督,协助和培训我们的客户的现场团队组装,委托,操作和维护...
龙门起重机支架起重机小车钢轮
龙门起重机支架起重机小车钢轮 产品描述 龙门起重机栈桥起重机小车钢轮是行走部件中最重要的部件,也是由于轮轨之间的冲击和磨损较强而最脆弱的部件。法兰磨损、法兰断裂和疲劳点蚀是经常遇到的问题。龙门起重机栈桥起重机小车钢轮损坏时,维修更换工作十分复杂,费时。 华大重工龙门起重机栈桥起重机小车钢轮: 采用高增益、全镇静、真空脱气锻...
起重机遥控抓斗
起重机遥控抓斗 产品描述 遥控抓斗起重机抓斗是一种能开闭抓斗,抓斗内的泥沙和各种散货。它是一种主要依靠左右两个组合斗或多爪开口爬行卸料的摊铺机。 遥控抓斗用于起重机结构紧凑、造型美观、节能、操作方便、抓斗力大、自动化程度高。是大型矿产品、生铁、废钢、垃圾、铁粉、稻草、矿渣等物料的理想装卸工具。 遥控抓斗起重机...
供应产品

Same products

GT-FM24-PLC填粉机机(3+9+9+3)三导管
GT-FM24-PLC填粉机机(3+9+9+3)三导管 卖方: 肇庆古雷特科技有限公司 * 描述 GT-FM-PLC(6-48工位三导管)氧化镁粉灌装机,是在GT-FM-PLC(6-48工位双导管)的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下: 三导管灌装机可以在一...
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing 卖方: Eurion Automation Co., Ltd. 高精度伺服控制系统:采用工控级电脑控制平台,配套进口伺服电机与减速机,确保运行高效、精准、稳定。 六轴联动结构设计:送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合,实现多工序复合成型。 ...
GT-FM18-PLC灌装机(8+2+8)三导管
GT-FM18-PLC灌装机(8+2+8)三导管 卖方: 肇庆古雷特科技有限公司 * 描述 GT-FM-PLC(6-48工位三导管)氧化镁粉灌装机,是在GT-FM-PLC(6-48工位双导管)的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下: 三导管灌装机可以在一...
48工位填粉机 GT-FM48
48工位填粉机 GT-FM48 卖方: 肇庆古雷特科技有限公司 * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度,根据直径、氧化镁粉末、填充速度,密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机...
8工位填粉机 GT-FM8
8工位填粉机 GT-FM8 卖方: 肇庆古雷特科技有限公司 * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度,根据直径、氧化镁粉末、填充速度,密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装...