Corn oil processing Line
Corn oil processing Line
(Keywords: Corn Oil Factory, Corn Oil Extraction, Corn Oil Plant, Corn Oil Manufacturing Plant, Corn Oil Production, Corn Germ Oil Extraction Plant, Corn Germ Oil Extraction, Corn Germ Oil Plant)
Description:
Fresh maize germ has a high water content, and there are lipase, easy rancidity, acid prices increased sharply, so the new embryo should immediately oil. If the embryo must be stored for some time, the embryo must be roasted or extruded extrusion processing, the esterification enzyme esterification passivation, moisture reduction.
The choice of oil-making process and equipmentshould be based on the processing capacity to determine. Treatment capacity, and can be used leaching method of oil. At present, most of the use of screw press oil press.
Corn Oil Processing Line, Sunflower Seed Oil Processing Line, Preparation of Rice Bran Oil Suppliers China.
Operation points:
Squeezing can be used two screw press, using the second press. The first into the pressing temperature of 120 ℃, into the water 3-4%, control cake thickness 6mm, the current stable at 25A or so, about 10% residual oil cake. The second press to extract the temperature of 125 ℃, 2.5-3% moisture into the squeeze, cake thickness 4.5-5mm current stability at 28A, residual oil in the cake up to 5.5%.
Corn germ oil physical refining equipment
Main features: the use of physical refining process, do not need to alkali deacidification, to avoid the loss of neutral oil, greatly reducing the cost of production.
Process: The crude oil is pumped into the refinery for degumming and neutralization. When the oil and soap were separated, rapid sinking, stop stirring, standing, and then aspirated from the upper clear oil to the water wash. Gleditsia from the bottom of the emptying tube into the soap bar barrel, when the Gleditsia oil more, stop the soap feet, soap feet into the soap by the pump tank. The remaining oil in the refinery is mixed with the next tank. The oil removed in the refinery tank was washed and then decolorized by decolorization.
Oil Expeller Machineis pumped into the gas analyzer at a constant flow rate and the oil flow is adjusted by the flow meter. In the gas separator, the oil is discharged through a plurality of nozzles on the feed tube, and a high vacuum of about 3 mmHg of absolute pressure is maintained in the gas separator so that a small amount of air is released into the oil. The oil comes out of the gas separator and is pumped into the oil-oil exchanger, exchanged with hot oil coming out of the deodorization tower, and heated to at least 180 ° C. From the oil-oil heat exchanger, the oil flows into the heat-conducting oil heater and is heated to 260 ° C. The heat-conducting oil is heated up to 290 ° C in the heat-conducting oil furnace and recycled in the whole process. The hot oil to be deodorized enters the combined deodorizing tower from the heat-conducting oil heater. The direct steam is used to raise the fatty acid and other relatively volatile odorous substances in the packing section, and then enters the plate-type deodorization and thermal decolorization. In the processing of low acid value or for the finished product oil acid value less demanding oil, you can not through the filler section, direct plate section deodorization and thermal decolorization. Deodorized deodorized oil from the combined deodorization tower, pumped into the heat exchanger and the oil to be deodorized for exchange, and then into the cooler, water cooling, oil temperature is not higher than 70 ℃, and finally through the fine filter, The insurance filter, and then deposited into the finished product storage tank.
For the deodorized rice bran oil, tea oil, corn germ oil and other fat (wax) content of higher oil should also be carried out further dewaxing and degreasing.
Suitable for oil varieties: rice bran oil, tea seed oil, corn germ, animal oil and other high acid prices, impurities and more fuel.
The main complete sets of equipment: heat exchangers, gas analyzers, heaters, modular deodorization tower, fatty acid traps, coolers, four steam jet pump, thermal oil furnace unit.
Oilseed Pretreatment EquipmentServiceyongsheng
Challenge Maximum uptime while constantly improving your process.
Downtime is a costly business. To keep your operation up and running, a professional partner with the know-how to service your equipment and systems plus a reliable supply of spare parts are essential.
Cooking Oil Preliminary Pressing MachineSolution: 24/7 service
Dingzhou Yongsheng Part & Service staff helps optimize and keep your operations on-line throughout the life-time of the equipment.We are trying the shortest delivery time for spare parts ensure .
We take care of your service needs at our workshops or at your mill. Contact us 24/7 for technical assistance or a visit by a field service engineer. Our service include system trouble shooting, retrofits, repairs, hands-on staff training and site audits.
在线联系供应商
Other supplier products
 |
Oil Press Machine YS - 80 | Oil Mill200A-3 YS-200 Oil Mill is approved product in our country, all execute ISO9001 standard. This kind of Oil Mill Machinehave rational constr... |
 |
Oil Mill Machine YS - 95 | Oil Mill MachineYS - 95 Name: Oil Mill Machine YS - 95 Packing size: 1630 x 610 x 1250 Power: 7.5 KW Production: 4-5 tons / 24 hours This Oil ... |
 |
Oil Pressing Plant | Oil Pressing Plant Pressing Oil Extraction is the use of physical pressure to separate the oil from the oil seeds,it’s derived from the tradi... |
|
|
Corn oil processing Line | Corn oil processing Line (Keywords: Corn Oil Factory, Corn Oil Extraction, Corn Oil Plant, Corn Oil Manufacturing Plant, Corn Oil Production, Corn ... |
 |
Edible Oil Extraction Machine with Filter YS - 95A | Edible Oil Extraction Machine with FilterYS - 95A Name: Edible Oil Extraction Machine with Filter Packing size: - Edible Oil Extraction MachineP... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
