.

QC12K-NC Hydraulic Swing Beam Shearing Machine-ESTUN E21S system

1. The design meets EU international standards. Welding parts uses tempering, vibration and other processing methods to eliminate stress ensuring the structural strength and rigidity of each component; All machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel with the latest technology;
2. Backgauge is adjusted by HIWIN high-precision ball screw and linear guide driven by E21S controller;
3. Ball screw and Linear guide structure, using frequency converter positions X axis to ensure accuracy, unique designed timing transmission mechanism, stable and reliable.Rigid upper beam runs on 8-point bearings with bending precision of +/-0.01 mm;
4. Front safeguard rail adopts opening door cut off power,ensuring the operational safety;
5. Rapid adjustment mechanism for rearranging blade clearance, simple operation by hand and adjusting steplessly.
STANDARD EQUIPMENT
1. ESTUN E21S NC controller system.
2. Linear guide rail and ball screw accuracy of 0.01mm(HIWIN,TAIWAN).
3. Steel mono-block construction.
4. DELTA frequency converter
5. Standard electrics from Schneider, France.
6. Standard oil tube connectors from EMB Germany.
7. Standard valves and oil pump from Bosch Rexroth Germany.
8. Standard main motor from Siemens Germany
9.Hydraulic and electrical overload protection
10.Light guards ensure the safety of operators during operation(optional)

ESTUN E21S Controller:ESTUN E21S Controller

  • Backgauge control
  • Control for general AC motors, frequency inverter
  • X-axis intelligent positioning
  • Double programmable digital output
  • Stock counter
  • Program memory fo up to 40 steps, up to 25 steps per program
  • One side positioning
  • Retract function
  • One key backup/restore of parameters
  • Units: Mm/inch
  • Language: Chinese/English
DETAILED PICTURES
esutn-e21s-nc-controller

ESUTN E21S NC Controller:

E21S controller cantilever device,referring to man-machine engineering design principle, easy CNC system operation surface,significantly improving the operation precision and comfortability.

Main motor: Siemens Germany

Oil pump:Sunny AmericaThese parts can ensure to make the whole machine more stable and less noisy.
main-motor

Ball screw, linear guide(optional): Hiwin Taiwan

High precision backgauge device, high-performance ball screw and polished rad structure, high-performance motor drive, guarantee the positioning accuracy, unique timing transmission mechanism, reliable an stable.

Hydraulic Valve:Bosch Rexroth

GermanySealing rings:NOK, JapanGerman Bosch Rexroth integrated hydraulic valve block,hydraulic transmission with high reliabilty,integrated hydraulic system can effctively alleviate problems caused by leakage of hydraulic fluid.
shearing machine hydraulic valve

Electrics: schneider,France

Work with TAIWAN DELTA frequency converter to prevent X-Axis swinging when positioning.

Casing Tube: EMB, Germany

German EMB casing tube and connectors effectively reduce the adds against welding slag jaming the valves and affect oil flowing.
hydraulic shearing machine casing tube
High precision backgauge device,high-performance ball screw and polished rad structrue,high-performance motor drive,guarantee the positionging accuarcy,unique timinig transmission mechanism,reliable an stable.

Rolling steel balls:

Rolling steel balls on the workbench can reduce friction,protect the workpiece surface,delicate design is convenient for cutting petty materials by band

Foot pedal: KACON South Korea

The operation is more fluid and stable.Safety and longer service life are guaranteed.

Other details of the E21S NC plate cutting machine:

QC12K Series Hydraulic PendulumComponents

Serial No.

Part Description

Brief instruction/ Orignal

Note

1-

NC Control system

■E21s NC System □E200PNC System

2-

Electrical components

Schneider Electrical from French

Travel switch & Limit switch

3-

Main Motor

Siemens from Germany Brand

4-

BackGauge & RAM Drive

Inverter from Taiwan delta

Accurate positioning control

5-

Foot switch

KACON from South Korea

6-

Hydraulic System

Bosch-Rexroth form Germany

Sealing Element

PARKER from U.S.A Brand

7-

Tubing connector

EMB form Germany Brand

8-

Ball screw/ Polished rod

HIWIN from TaiWan Brand

2. Equipment

1-

Pneumatic sheet support system

□Yes

■No

2-

Rear sheet sliding plates

■Yes

□No

Fixed type(metal)

3-

Angle Gauge

□Yes

■No

4-

Squaring Arm(800mm)

■Yes

□No

5-

Inverter accurate control

■Yes

□No

6-

Light curtains for finger Protection

□Yes

■No

Reset button

7-

Back safety Sensors

□Yes

■No

8-

Back metal fence Safety

■Yes

□No

9-

Safety standards

CE

CSA

NR-12

OSHA

WEB:
COMPANY:Ma'anshan Gilde CNC Machine Tool Co.,Ltd
TEL:


在线联系供应商

至: 马鞍山格尔德数控机床科技有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Rolling Machine
Rolling Machine Abending roll machineis a machine that will roll different kinds of metal sheet and plate into a round or conical shape. It can be also called a "s...
Hydraulic Press Brake
Hydraulic Press Brake Hydraulic Press Brake machine belong to the universal machine tools, mainly used for metal sheet and plate bending, by both sides is two pieces of ...
Hydraulic Shearing Machine
Hydraulic Shearing Machine Theis a machine use a blade against to another blade to act vertical movement. It is use the movable upper blade and the fixed blade, which through...
MB8 Automatic Sheet Metal Press Brake Bending Machine With DA56S System
MB8 Automatic Sheet Metal Press Brake Bending Machine With DA56S System MB8 CNC Automatic 3+1 Axis Hydraulic Sheet Metal Press Brake Bending Machine With DA56S System Introduction 1. The design meets EU internation...
QC12K-NC Hydraulic Swing Beam Shearing Machine-ESTUN E21S system
QC12K-NC Hydraulic Swing Beam Shearing Machine-ESTUN E21S system 1. The design meets EU international standards. Welding parts uses tempering, vibration and other processing methods to eliminate stress ensuring...
供应产品

Same products

LJ-906 6 Heads High Speed Computerized Embroidery Machine
LJ-906 6 Heads High Speed Computerized Embroidery Machine 卖方: Zhejiang Lejia Electrical Machinery Co., Ltd. High speed embroidery machinesare developed with advanced controlling system, reliable machine b...
TTC400A Cable Tool Setter Unit
TTC400A Cable Tool Setter Unit 卖方: Harbin Pioneer M&E Technical Development Co.,Ltd Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. Afte...
TP60 Touch Trigger Probe
TP60 Touch Trigger Probe 卖方: Harbin Pioneer M&E Technical Development Co.,Ltd Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. Afte...
CNC Machine Tool Touch Probe System
CNC Machine Tool Touch Probe System 卖方: Harbin Pioneer M&E Technical Development Co.,Ltd Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. Afte...
CNC Machine Tool Setter System
CNC Machine Tool Setter System 卖方: Harbin Pioneer M&E Technical Development Co.,Ltd Harbin Pioneer M&E Technical Development Co, Ltd, cnc tool presetter manufacturers, was found...