.

EVI Heat Pump (12KW/19KW)


EVI Air to Water Heat Pump Overview

  • This air source heat pump is using Scroll EVI Copeland compressor, and EVI technology to make strong capacity to heating when cold ambient,a digital controller to feel and defrost.
  • EVIair source heat pump12kW 19kW to pass EN14825 ERP energy level test, all SCOP: A+, and passed TUV CE certificate.
  • We using monobloc design to easy install, and high-efficiency heat exchanger, inside directly building high pressure, low pressure sensor to easily read and balance inside safe pressure.
  • One key touch controller auto running connect 16PCS heat pump by modular, can control by Mobile or computer from Connect R485S port on the PCB panel.

								EVI Heat Pump (12KW/19KW)

								EVI Heat Pump (12KW/19KW)

Vertical design & low noiselow temperature heat pumpis best to heat pump for cold winter heating room choose.SUNCHIEVI HeatPump Unit: This unit is mainly used for heating in low-temperature area. The unit consists of outdoor and indoor units. The main components of the outdoor unit include a compressor, evaporator, fan, electronic expansion valve, steam separator and so on. The main components of the indoor unit include a condenser, liquid storage device, and pump (optional built-in). The outdoor unit and the indoor unit are connected by two copper tubes. This unit is suitable to be used in the area where the temperature is above -25℃. It can be used for heating and make hot water. The temperature range of hot water the unit can make is from 30℃ to 60℃. The main engine exhausts the wind sideward.Main Configuration:Copeland compressor, intelligent electronic expansion valve, high efficiency tube heat exchanger, SANHUA four-way valve, low noise and efficient internal rotor motor, 9.52 inner thread copper tube, blue hydrophilic ripple fin, and Wilo water pump (optional built-in).

Main Features of EVI Air Source Heat Pump:

1. Complete Freeze-proofing: According to the characteristics of low temperature water freezing, the waterway is separated from the main engine perfectly, and is installed in the indoor unit to solve the freezing problem of waterways thoroughly.2. High Efficiency and Ultra Wide Range Operation: The unit can be used in the area where the ambient temperature is as low as -25℃ to 45℃. Under the environment of -15℃, COP can reach 2.52 when the unit is used for radiant floor heating ( leaving water temperature is 45℃).3. Perfect Protection System: Four water system protection systems, five power supply system protection systems, nine heating system protection systems, control system intelligent detection systems, intelligent alarm, and 360°protection unit.

								EVI Heat Pump (12KW/19KW)							
								EVI Heat Pump (12KW/19KW)							
								EVI Heat Pump (12KW/19KW)							
								EVI Heat Pump (12KW/19KW)							
								EVI Heat Pump (12KW/19KW)							
								EVI Heat Pump (12KW/19KW)

Low Temperature Heat Pump Specification

EVIAirHeatPumpWaterHeater(working-25Cwinter)
Model KFXRS-12IID KFXRS-19IID
HP 3P 5P
Powersupply Type 380V3N~50Hz
Ratedheatingcapacity kW 11 18
Ratedheatinginputpower kW 2.6 4.3
Ratedheatinginputcurrent A 4.9 8.1
COP w/w 4.2 4.2
Maxinputpower kW 4.3 6.7
Maxinputcurrent A 8.1 12.7
Ratedwaterflowvolume m3/h 1.9 3.1
Ratedhotwateryield L/h 235L 385L
Refrigerantchargevolume kg 3.5 4.5
Refrigerant Type R407C
Heatinghotwatertemp.rang ℃ 30℃~55℃
Workingambienttemp. ℃ -25℃~45℃
Compressor Type Copeland
Fanmotor Type ACmotor,3-speedfan
Throttleway Type Electronicexpansionvalve
ElectronicComponent Type SchneiderACcontactor
Pressuredevice Type Built-inhighandlowpressuresensor
Watersideheatexchanger Type Highefficientheatexchanger
Airsideheatexchanger Type Hydrophilicaluminumfinheatexchanger
Noise dB(A) 53 55
N.W/G.W Kg 103/111 118/134
Connectpipesize inch Rc1"/DN25
UnitSize(L*W*H) mm 1040*420*865 1040*420*1380
Thedataintheabovetabletestasfollowing:Heatingtestcondition:ambienttemp.(DB/WB):20℃/15℃,initialwatertemp.:15℃,outputwatertemp.:55℃;Note:thedatainthistableareforreferenceonly,pleasefollowingthenameplateparameterofthisproduct

								EVI Heat Pump (12KW/19KW)							
								EVI Heat Pump (12KW/19KW)							
								EVI Heat Pump (12KW/19KW)							
								EVI Heat Pump (12KW/19KW)

在线联系供应商

至: JIANGSU SUNCHI NEW ENERGY CO.,LTD.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

8000 Cube Meter Swimming Pool Hot Water Solution
8000 Cube Meter Swimming Pool Hot Water Solution Swimming pool heat pump system water treatment uses the "circulation heating system" heating method. That is, “hot water unit circulation pip...
Industry 90℃ High Temperature Heat Pump Water Heater
Industry 90℃ High Temperature Heat Pump Water Heater Industrial High Temperature Heat Pump Overview Industry 90℃ high temperature heat pump water heater this is newest technology in the air source ...
9kw Air Source Heat Pump
9kw Air Source Heat Pump SUNCHI DC inverter house 9kw heat pumpsupplies the most energy saving hot water for house heating and domestic use in winter, and cooled water for ...
18 Kw Air Source Heat Pump
18 Kw Air Source Heat Pump 18 kW air source heat pumpwith Enhanced Vapor Injection (EVI)technology for dedicated heat pump applications, deliver outstanding performance and r...
Commercial DC Inverter Heat Pump (18KW/25KW/30KW)
Commercial DC Inverter Heat Pump (18KW/25KW/30KW) DC Inverter Driven Heat PumpOveriew Famous world name brand parts: DC inverter MITSUBISHI Compressor and HITACHI DC inverter controller, BLDC fan m...
供应产品

Same products

Wax injection
Wax injection 卖方: Yihui casting Technology Co., Ltd. Wax injection This category mainly includes the MAXWAX brand wax injection machinesdeveloped and...
Moulding tools
Moulding tools 卖方: Yihui casting Technology Co., Ltd. Moulding tools Casting supplies a complete range of jewellery moulding tools designed for profes...
Moulding machines
Moulding machines 卖方: Yihui casting Technology Co., Ltd. Moulding machines YihuiCasting provides advanced mold making equipments for jewelry designed for...
3D printer
3D printer 卖方: Yihui casting Technology Co., Ltd. 3D printer YihuiCasting provides advanced 3d jewelry printers designed for modern jewelry produc...
3D Design
3D Design 卖方: Yihui casting Technology Co., Ltd. 3D Design This category includes all 3D printers and relevant spare parts like release films, re...