Button Head Machine
- Button Head Machine
LD type series of heading machine is a special equipment for construction of prestressed project, and it can heading steel wire with the nominal diameter of Φ4、Φ5～Φ12.6. The diameter of upper heading is more than 1.5 times than the one of the steel wire. The use of hydraulic heading, hydraulic return in LD200C,LD300,LD400A,LD600 raises the return speed of the heading. AS all sliding seals use the Gled Ring and step seal as seals, the sealed effect is better, and the bearing capacity is higher, what's more, the resistance to wear gets better, the maintenance cost is very low and the service life is longer. The two-body design of heading mold facilitates the change of parts and improve the durability.
LD100A is a improved product on the basis of LD100. After improving, it can heading the steel wire with the specification of Φ4,Φ5 and increase the clamping force as well as improve the ability of clamping piece to clamp steel wire so that avoid the failure of threaded connection.
LD200C is a special heading machine for heading Φ7 prestressed steel wire.
LD300 is a special heading machine for heading Φ9 prestressed reinforcing steel(SBPL1275/1420).
LD400A is a special heading machine for heading Φ10.7 prestressed steel bar(SBPL1275/1420).
LD600 is a special heading machine for heading Φ12.6 prestressed steel bar(SBPL1275/1420).
- Button Head Machine
|
Parameter |
100 |
200 |
300 |
400 |
600 |
|
HeadingForce(kN) |
98 |
220 |
295 |
433 |
614 |
|
HeadingTrip(mm) |
8 |
12 |
13 |
12 |
12 |
|
ClampingTrip(mm) |
-- |
-- |
12 |
14 |
|
|
HeadingRange(mm) |
Ф4Ф5 |
Ф7 |
≤9 |
Ф10.7 |
Ф12.6 |
|
RatedOilPressure(MPa) |
50 |
50 |
52 |
50 |
50 |
|
ReturnOilPressure(MPa) |
-- |
≤10 |
≤10 |
≤20 |
≤20 |
|
Weight(kg) |
14 |
22 |
26 |
33 |
|
|
OutlineDimension(mm) |
Ф100(160)×275 |
Ф126(195)×224 |
Ф140(220)×214 |
Ф172(245)×224 |
Ф210(280)×234 |
在线联系供应商
Other supplier products
 |
Prestressed Tensioning Machine | 135G type lifting jack is a newly developed tensioning equipment by our company with a totally new concept. Product Description 135G type l... |
 |
SY-Concrete Electric Pole Machine | Overview of electric prestressed Pre-stressed Concrete Electric Pole Making Machine is a kind of mould equipment, which used for making a variety ... |
 |
Concrete Batching Plant | Hopper lift concrete batching plant belongs to compulsory and efficiency equipment, it can produce various kinds of concrete including Product Des... |
 |
QT10-15 automatic block machine for sale | Brief Introduce of QT10-15 automatic cement brick making machine Brief Introduce of QT10-15 automatic cement brick making machine Otherinformatio... |
 |
Vertical Coal Fired Steam Boiler | Block Making Machine, Interlocking Block Machine, Concrete Pole Machine FactoryVertical coal-fired boiler, A head, drum, top Furnace, Furnace, bend... |
Same products
 |
XD-MAX Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... |
 |
XD-55 Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... |
 |
XD-10 Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... |
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | 卖方: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | 卖方: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
