Non Weld Positive Centralizer
Non Weld Positive Centralizer
Non Weld Positive Casing Centralizer are uniquely designed with flat bottom U profile of different depths. The Centralizers significantly reduce frictional drag while being used in deviated holes. They provide almost 100% Stand Off when run inside a cased hole. They are supplied 1/4" or 6 mm less than the inside diameter of the hole size in which Centralizer is to be run. This design eliminates weak (brittle) spots passage. U profile bow design permits maximum fluid passage.
End Collars are designed with self-locking action, which are easy to assemble, time saver and have strong grip. The Ten special U sizes Bows can be configured to any hole dia. These Bows with extended profile prevent them from hitting against casing collars. Bows are of high quality steel for consistent characteristics.These centralizers undergo a special Iron Phosphate coating process to prevent from Rust then coated with special Polyester Powder. These can be shipped in half assembled condition for economy in shipping and storage costs.They are available in all sizes ranging from 4 1/2" to 20" sizes. Any special sizes or combination can available on request.
Zhongshi manufacture casing centralizer, float equipment, cementing head, cementing plug and Slip On Casing Centralizer etc. We have 19 years manufacturing experience of petroleum machinery products till now. We have 19 years manufacturing experience of petroleum machinery products till now.our products are not only on admission Central Plains, Daqing, Shengli, Nanyang, Yanchang, Changqing, Karamay and other domestic major oil fields and coal-bed methane areas, but also are exported to Southeast Asia, Northern Europe, the Middle East, Africa and South America market.
在线联系供应商
Other supplier products
 |
Rotating Centralizers | Rotating Centralizers Rotating centralizers were developed in response to industry requirements for centralizers that could be used with a rotatin... |
 |
Rock Bolt PVC Centralizer | Rock Bolt PVC Centralizer We offer PVC centralizer(rebar) which are manufacturered from high grade quality raw material, these PVC centralizer(reb... |
 |
Rock Bolt PVC Centralizer | Rock Bolt PVC Centralizer We offer PVC centralizer(rebar) which are manufacturered from high grade quality raw material, these PVC centralizer(reb... |
 |
Single Straight Turbolizer | Single Straight Turbolizer Turbolizer centralizers have all of the characteristics of regular centralizers as far as starting and restoring forces... |
 |
Wellbore Cable Wiper | Wellbore Cable Wiper These wipers remove excess wall cake to improve cement-to-formation bonding by producing a wiping action during running and r... |
Same products
 |
Sewing Machine Spare Parts | 卖方: Jinzen Intelligent Technology (Dongyang) Co., Ltd. | Sewing Machine Spare Parts B2001-771-0A0 LBH-780 One of the key features of our spare parts is t... |
 |
钢轨磨耗测量尺 | 卖方: 842518 | LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
 |
道岔尖轨侧磨量及降低值检测尺 | 卖方: 842518 | 尖轨是转辙器中的重要部件，依靠尖轨的扳动，将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展，加速了道岔尖轨的磨损和报废，特别是尖轨的侧磨较为严重，要经常测量尖轨的磨耗状态，给出... |
 |
滑动式钢轨磨耗尺 | 卖方: 842518 | LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值，侧面磨耗值和尖轨降低值。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
 |
数显式 辙叉结构高度测量器 | 卖方: 842518 | LJ-ZC-A钢轨辙叉磨耗测量尺主要以辙叉两边的翼轨未磨耗面做为磨耗测量的基准面，分别测量辙叉心宽40mm断面处辙叉心垂直磨耗和翼轨垂直磨耗量。 |
