Door Frame Roll Forming Machine
YC Steel Door Frame Roll Forming Machine
We also candesign the strictly according to your required profile.
SURFACE TREATMENT
1) Processing material: steel strip, coil tensile strength 280Mpa-550Mpa
2) Material thickness: 1.5-2.0mm
3) Formed size: as per profile drawing above
4) Main motor power: 11kw+11kw
5) Pump power: 5.5kw
6) Productivity: 4-12m/min
7) Roller stations: 20-22 steps
8) Roller material: GCr15 steel with vacuum heat treatment HRC57°-60°
9) Active shaft material: 40Cr
10) Shaft diameter: Ф70mm
11) Cutting system: hydraulic mould cutting type, automatic cut to any length you need
12) Cutting blade material: SKD11
13) Punching system: auto multi-purpse punching device
14) Punching mould material: SKD11
15) Machine construction: as per machine photos
16) Transmission type: double chains
17) Control system: Taiwan Delta PLC computer control system with inveter
18) Power supply: 380V, 3 Phase, 50Hz(or as per your request)
19) Machine dimensions: about 8.5*1.6*1.2m
20) Machine weight: about 7700kg
TECHNOLOGY
3T hydraulic decoiler→leveling machine→guiding platform→auto multi-purpose punching system→main roll forming machine→hydraulic cutting system→2m output table, two 11kw electric motors, hydraulic station with 5.5kw electric motor, PLC control system
SALES TERMS
1). Machine Price: Please contact us, we will try to give you good discount for starting our cooperation
2). Payment term: 30%TT should be paid as advance deposit, 70%TT before shipment
Or 100% LC at sight
3). Package: naked with simple plastic film and loaded in one 20-feet container
4). Delivery time: 50 working days after receipt of the deposit
5). Guarantee: 12 months. If any part of machine breaks, we will supply it for free.
6). After sales service
This producing line is maintained free of charge for 12 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug. Buyers should take all the fees for technicians traveling abroad, and pay 100USDdayperson.
在线联系供应商
Other supplier products
 |
4MM-3200MM CNC Cutting Machine | Parameters 1) Max cutting thickness: 4mm 2) Max cutting width: 3200m 3) Cutting angle: 1.5° 4) Intensity of sheared material: 450N/m㎡ 5) Dist... |
 |
2-Wave Highway Guardrail Roll Forming Machine | We also can design the as per your required profile drawing SURFACE TREATMENT 1) Processing material: steel strip 2) Material thickness: 2.5mm... |
 |
Trapezoidal Roof Panel Roll Forming Machine | We also design the as per your required profile drawing SURFACE TREATMENT 1) Processing material: aluminium/zinc/galvanized steel/colored steel c... |
 |
Ceiling CD60x27 and UD28x27 Profiles Double Line Roll Forming Machine | Ceiling CD60x27 and UD28x27 Profiles SURFACE TREATMENT 1) Processing material: steel strip 2) Material thickness: 0.3-0.7mm 3) Formed sizes on on... |
 |
YC Automatic 1.25M-1.5MM Steel Coil Slitting Line | Automatic Slitting Line SPECIFICATIONS Hydraulic decoiler with coil car→feeding platform→leveling system→slitting system→scra... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
